New Machinery & Machining Tools Products

Joint Cleanout Saws have dust free operation.

JS-90 and JS-110 walk-behind cutting saws have upcut rotation, which enables dust extraction and allows quick connection to dust collection system. Using dry diamond blades, both saws cut to maximum depth of 3 in. and clean joints at rate of 20 to 60 ft/min. Saws allow for simultaneous use of 2 blades for spalled joint repairs. JS-90 has 9-hp Honda gas engine, and weighs 160 lbs; JS-110 weighs...

Band Saw Blade eliminates tooth strippage.

Lenox Rx-®+ bi-metal blade, with rigid isophonic tooth design, minimizes harmonics during cutting to reduce noise levels. It improves cutting performance on structural steel, I-beam, angle iron, channel iron, tubing, pipe, wide flange beams and nested bundles. Blade is also available in extra heavy set to avoid blade pinching.

Mortar Saw cuts joints dust free.

Sawtec(TM) Tuc-Pointer cuts out mortar or grout joints. It has maximum cutting depth of 1-1/4 in. and, when used with dust collection system, is virtually dust free. Unit cuts dry, and may be used in horizontal or vertical applications. It has heavy-duty grinder with electronic speed stabilizer, overload warning, and automatic shut-off protection. Adjustable depth shoe is available to enhance...

Live Center compensates for thermal expansion.

Spring-Type Live Center prevents damage to workpiece by sliding along z-axis. As heat from machining process causes workpiece to grow, rotating point is pushed back into body of center. Bearing, positioned between point and series of stacked disk springs, maintains thrust capacity. Low-profile body provides tool clearance and 0.0001 in. accuracy. Four point styles suit most applications.

Saving Energy with Efficient Belt Drives

By introducing energy efficient belts on electric motor drives, you can implement a simple, cost-effective solution to achieve energy savings in your facility.

Turning Inserts machine all types of steel.

P Series double sided turning inserts are available in 3 grades, 3 styles of chipbreaker geometries, and coated with multi-layer PVD coating for machining steel, cast steel, steel alloys, stainless steel and other long chipping materials. Grades include: AN 3015, which resists flank wear and plastic deformation; AN 3025, for general purpose applications; and AN 3035 with wear resistance for...

Pan/Tilt Mechanism is digital servo controlled.

PT-HP-S2 is designed for ENG and CCD cameras with digital drive lenses. It is controlled via RS-232 or RS-422 protocol with direct lens and camera interface connectors for control functions. Manual smooth motion is accomplished using velocity servo controls, along with convergent pan, tilt, zoom and focus presets. PT-HP-S2 incorporates heavy duty cross roller bearings and Swiss DC motors with...

Air-Operated Clamp field retrofits onto existing tools.

MILLHOG-® Air Clamp(TM) pneumatic cylinder replaces manual draw rod clamping assembly on Tube Weasel-, Ground-, and Wart MILLHOG-® right angle welding end prep tools to speed up attach/release times. Featuring self-centering draw rod, which inserts into tube or pipe I.D., MILLHOG Air Clamp instantly locks tool into position.

Threading Tool handles stainless steel.

Snap Tap A2 chipbreaker in CP500 grade minimizes vibration without compromising chip flow, can be used with all in-feed methods, and is available in external and internal A2 profiles for stainless steel threading operations. It has wear-resistant PVD coating, tough micrograin substrate, and high-positive cutting geometry.

Print Mechanisms feature lever activated design.

EZ-OP Model LTPF247 and Model LTPF347 24V print mechanisms feature 2 in. and 3 in. paper width options, respectively. Units deliver print speeds up to 220 mm/sec with print resolution of 8 dots/mm for clear characters and graphics. Dimensions are 86.2 x 54 x 25.8mm for 2 in. model and 110.2 x 54 x 25.8mm for 3 in. version.

Die-Cutting Machine handles various laminates.

UltraPress performs die-cutting tasks such as thermal die-cut, emboss, hot and cold steel-rule die cut, and steel-rule kiss cut. Features include adjustable stop blocks to aid in setup or change over; user friendly, easy-access controls; and automatic feed table for operator safety. Available in various sizes, UltraPress is designed for use as freestanding unit or in-line as part of system.

Custom Fabrication & Machining Services with Over 30 Years of Experience

As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.