Indexing Table doubles robotic work-cell productivity.
OSA-LATOR(TM) lets operator remove completed parts and set pieces for next part into tooling fixture on one side of indexer, while robot welds parts on other side. Mechanical orbital-lok drive system provides ramped acceleration-deceleration, vibration-free rotation, and stops within +/- 0.002 in. at 30 in. from center of rotation. Capacities range from 1,000 to 10,000 lb and indexing times range...
Read More »
Toggle Press generates 10 tons of force.
Pneumatic Model 2530BEM bench top press works in both single stroke and automated applications. It is powered by 3 7/8 in. dia tandem cylinder coupled to lever/toggle linkage to generate force with relatively small amount of air. It can be cycled up to 80 strokes per min at full 1.5 in. stroke with repeatability of +/-0.001 in. Press has 8 X 10 in. platen. It is available tooled or untooled, as...
Read More »
Reverse Expansion Insert presses into plastic hole.
Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by...
Read More »
Lubrication System keeps machines running smoothly.
Six Pack system comes with bank of 6, 12, or 18 pumps that operate from air source regulated by solenoid valve. Timer controls On and Off times of delivery cycle. All components are wired and plumbed to backplate in NEMA 12 enclosure. Lube system has 1/2 gal clear reservoir that feeds system and allows visual confirmation of level. Applications include lubricants for cutting, punching and...
Read More »
Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!
This white paper outlines the different types of screw head and drive designs.
Read More »
Face Cutters have hexagonal inserts.
Hexamill 220.66 is suitable for medium to heavy-duty face milling applications. Face milling cutters have strong, thick inserts with 6 cutting edges that enable feed rates in excess of 0.020 in/tooth. Also available are cassettes to accept inserts, and CM cutter body can be fitted with cassettes to cut at depths of more than 0.315 in. Cutter is available in both normal and close pitch versions....
Read More »
Circular Cold Saws cut steel without leaving burrs.
Saws use various levels of automation, from mechanical stops to Allen Bradley CNC controls. All models have 2 self-centering, infeed vises for length control. Cut length is controlled by positive micrometer adjusted mechanical stop or servo motor. All models are available with spindles for cutting steel or non-ferrous materials. Material is clamped on both sides of cut to eliminate hanging burrs.
Read More »Punching Machine has
TRUMATIC 2010 Rotation offers hydraulic punching head; all-tool, 360 degree rotation; brush tables; and 50 x 50 in. working range. ToPs Light CAD/CAM software lets users create programs offline or at machine. Through use of Multitool punching tools, number of available tools can be expanded up to 100. Stroke rates are 2,200/min for marking/beading and 900/min for punching (at 0.040 in. pitch)....
Read More »
Splicing/Ironing Machines have in- or off-line designs.
Opti-Splice(TM) 1000 & 2000 machines utilize ultrasonic energy to splice (1000 series) then iron (2000 series) material to form continuous runs of fabric that accommodates any width. Ironing creates smooth, unobtrusive joint that increases seam strength. Portable and self-contained, equipment can be used on multiple lines for end-to-end web splicing. Both Opti-Splice(TM) 1000 and Opti-Splice(TM)...
Read More »TEM Systems remove every burr.
TEM (Thermal Energy Method) systems perform internal and external deburring of cast iron, steel, stainless steel, and aluminum parts with intense bursts of heat. They also perform deflashing of die cast zinc parts. Both manual and fully automatic TEM systems are available. Parts are sealed in deburring chamber by 250 ton force, and oxygen/natural gas mixture is introduced. Machine-initiated park...
Read More »
CO2 Laser offers ultra-short, high-peak-power pulses.
DIAMOND(TM) GEM Q-400 Q-switched CO2 laser produces 15W avg power at 50 kHz repetition rate and 9.25 micons wavelength. It features 2.5 kW peak power with pulse widths controllable to less than 150 ns and peak pulse energies to over 400 microjoules. RF-excited waveguide oscillator is sealed in all-metal housing. Laser is designed for drilling and micromachining applications including PCB microvia...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
