Vertical Tube Benders produce up to 8 bends per cycle.
Twin Head Vertical Tube Benders cycle in 5 to 8 seconds. Each bending head is moved by its own screw to set up center to center distance between bends. Center distance is available from 4 to 80 in. Heads have adjustable angle of bend stop ranging from 0° to 180°. Hydraulically actuated mechanical locking system allows mandreless bending of light gage material. Machines are available...
Read More »
Truck Rim Cleaner blasts off dirt quickly.
GLPX Extreme rim b1aster uses 0.170 to 0.330 mm steel shot to blast away powder coatings, dirt, grease, oil, stones, and other road elements from steel or aluminum truck rims up to 26.5 in. dia. Cycle time is 1.5 to 5 min depending on thickness of coatings to be removed. Elevator system cleans out old particulate to keep shot clean with each cycle. Unit has three 5 hp impeller motors, automatic...
Read More »
Ball Screw Wiper protects against contaminants.
Combination Wiper includes friction type finger wiper in front of felt wiper. Dual wiper keeps contaminants from entering ball nut, while simultaneously lubricating ball screw. Felt doubles as lubricant reservoir, maintaining constant thin film of oil on screw thread as ball nut moves. Because minimal amount of oil is deposited on thread, ball screw oil consumption is reduced by 75%. Wiper is...
Read More »
Metal Thread Inserts fit wood and composition board.
Three metal thread inserts install without need for special tools. Knife thread inserts, available with coarse and fine internal threads, furnish holding power in hard woods such as oak, maple, and mahogany. Finsert thread inserts provide strong metal threads in softer materials, and prevent splintering, splitting, and thread pullout. Hex Drive thread inserts are for soft materials such as pine,...
Read More »
Epoxy Crusher Backing Solutions for Construction Aggregate & Ore Mining Applications
This white paper provides a guide to epoxy crusher backing solutions for construction aggregates and ore mining applications.
Read More »
Horizontal Machining Centers are FMS system-ready.
HU50-5AX tilting trunnion table type machine accommodates part dia up to 27 in. and weights up to 1430 lbs. 50 taper spindles are available with up to 12,000, or 15,000 rpm and 40 taper up to 20,000 rpm. HU40T features max part dia of 20 in. 40 taper spindles are available with up to 12,000, 15,000, 20,000 rpm or 30 taper up to 40,000 rpm. Both machines hold 0.00012 in. true position through all...
Read More »
Syringe Filling Systems offer consistent adhesive packaging.
Series 8000BF syringe filling systems load 3cc to 55cc syringes without contamination, waste, or cleanup. Pneumatically operated systems use microprocessor circuitry, and make it possible for 1 worker to fill up to 500, 30cc syringes per hour with ±2% accuracy. Systems handle adhesive viscosities ranging from gel cyanoacrylates to thick sealants, and are designed for use with silicone-free...
Read More »
Machining Center is based on indexing dial design.
Turn 6 LC(TM) flexible dial machine performs single-clamp, multiple-process operations. It combines up to 6 servo-controlled CNC motorized chucking spindles mounted on Hirth Coupling main indexing rotary transfer table. Each station handles 8 in. work envelope. Flexible CNC control allows for single-point machining using turning tools and G-programming logic. Center offers true C-axis...
Read More »Ceramic Inserts triple cast iron milling productivity.
Fix Perfect ceramic inserts have 8 true cutting edges and run 3 times faster in cast iron milling operations than conventional carbide inserts. Inserts are made of Kyon3500 ceramic that has shock resistance needed to perform roughing operations on cast iron at very high speeds, chiploads, and depths of cut. On-edge or tangentially mounted insert puts 1/2 in. of carbide behind cutting edge of 0.5...
Read More »Ceramic Cutters cut faster than carbide.
Kyon 2100 grade silicon nitride based ceramic inserts boost productivity 100% to 500% on high temperature alloys by machining at cutting speeds of 3,000 sfm, 10 to 25 times faster than carbide grades. It performs rough milling of nickel, cobalt, and iron based heat resistant alloys, and rough machining of high temperature alloys such as Waspalloy, Haynes 25, Inconel 718, Stellite, and similar...
Read More »
Horizontal Machining Centers allow user to choose travels.
Modular HS-4, HS-6 and HS-7 are available in sizes from 84 x 50 x 60 in. up to 150 x 66 x 60 in. Each machine comes equipped with 50-taper spindle, 30-hp vector drive and 38-tool side-mount tool changer to handle heavy-duty cutting and metal removal. All are available with built-in fourth-axis rotary table.
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
