Machinery & Machining Tools

Miscellaneous Fixtures

Locking Kits fit Haas machining centers.

Ball Lock(TM) fixture kits contain all components needed to locate and lock fixture plates to subplates. System provides quick change capability, and holds plates together with working loads up to 20,000 lbs. Standard kit includes correctly-sized subplate and fixture plate, both pre-drilled with ball lock bushings installed and correct number of shanks, T-slot nuts, sine fixture keys, and socket...

Read More »
Collet Chucks bolt directly to lathe spindle nose.
Chucks and Collets

Collet Chucks bolt directly to lathe spindle nose.

Direct mount collet chucks can be used on any spindle that uses draw tube type actuator. With pull back design, compact units are suited for clamping small diameter workpieces, increasing tool clearances and reducing strain on spindle bearings. Rigid clamping allows increased machine speeds for bar feed applications. Chucks are available in types 5C, 16C, 3J, 20C and 25C. Threaded nose is...

Read More »
Holding Assemblies are used in metal product manufacturing.
Magnets

Holding Assemblies are used in metal product manufacturing.

Permanent Magnetic Holding Assemblies are designed for positioning, stabilizing, holding, and feeding materials, parts, and scrap. Various standard configurations and sizes are available with insulated Ceramic, Alnico, and Rare Earth Magnets. Assemblies for watertight and high-temperature applications are also available.

Read More »
Tables

Table offers quick manual height adjustment.

Speedy Crank System 2000 sit-stand table offers top crank ratio of 4 cranks and front crank ratio of 6 cranks for every 1 in. of height adjustment. Height range is 16 in. with widths ranging from 30 to 72 in. and depths of 24 or 30 in. 14 gauge steel upright tubing and 16 gauge cross tubing are powder-coated for scratch and chip resistance. Speedy Crank is rated for dynamic weight load of 200...

Read More »
Presses

Punching Machine processes material up to 0.312 in. thick.

TRUMATIC 5000 Rotation (TC 5000 R) machine offers 4600 ipm positioning speed, hydraulic punching head capable of 1200 punching strokes per minute, and 50 x 100 in. working range. Two separate motors are controlled synchronously and without mechanical link. Racks and pinions interlocked at an angle provide stiffness for drive system and improve gantry's ability to withstand stress. Hydrostatic...

Read More »
Finishing System operates at 190°F.
Finishes

Finishing System operates at 190°F.

BC40 TRU TEMP(TM) produces high-quality black-oxide finish on iron and steel components in 10 to 15 min. Non-polluting system produces satin, true-black magnetite finish of 0.000020 in. thickness. Compact, 7-tank system eliminates severe splattering and boil-over hazards. Process is suitable for dimensionally-critical parts, including power drive components, gears, and machine parts, and meets...

Read More »
Wire Termination Machine features linear slide table.
Machinery

Wire Termination Machine features linear slide table.

LPT-522 magnet wire termination machine inserts MAG-MATE terminals into coil-wound components found in motors, stators, bobbins, and other magnet wire applications. It is capable of producing up to 600 assemblies per hour, and can perform up to 2 secondary operations such as continuity testing, wrap-off post trim, and tab bending. Machine handles in-line, radial and linear/angularly opposed...

Read More »
Cord Reel holds 40 ft of extra heavy duty cord.
Reels

Cord Reel holds 40 ft of extra heavy duty cord.

Craftsman Professional Cord Reel with triple-tap power outlet has 12-gauge, 3-wire power cord with maximum rating of 1875 watts, 15 amps and 125 volts. Triple-tap has 3 grounded outlets with re-settable circuit breaker protection. LED indicator illuminates when power is live. Reel is made of thermoplastic that withstands heavy-duty use. Cord automatically retracts for tangle-free storage.

Read More »
Electrical Cable Reel features compact frame.
Reels

Electrical Cable Reel features compact frame.

NSCR700 electrical cable reel mounts in confined spaces for use with power tools, lights, machinery, and generators. Heavy-duty spring motor provides self-contained rewind power with non-sparking, locking ratchet assembly. NSCR700 houses 45 amp, 3-conductor, 600 V collector assembly, with #8 gauge wiring from collector ring to junction box. Equipped with 4-way roller assembly, it accommodates 50...

Read More »
Saws

Miter Saw features 12 in. blade.

C12FSA Sliding Dual Bevel Compound Miter Saw operates on 12 Amp motor that gradually progresses to maximum RPM level, preventing upward jerk due to torque when started. Constant blade speed delivers clean cut, due to electronic feedback control feature in motor. Overload protection safety device shuts itself down if it begins to draw too much power. Safety chip deflector prevents wood chips from...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers