Machinery & Machining Tools

Hydraulic Press monitors critical force/position data.
Presses

Hydraulic Press monitors critical force/position data.

C-frame 20-ton hydraulic press includes Assembly Monitoring System. System monitors force and position sensors mounted in press to measure key attributes of each assembly produced. Compared to ideal specifications, assembly's status is determined within microseconds; system sends pass/fail output signal; and identifies any attribute that is different from ideal. System uses single channel of...

Read More »
Machining Centers

Tooling Modules have multiple axes.

FlexCenter FC350-V has 14 in. work cube, and can be configured with 5 hp vertical spindle and 40 taper or HSH63 tooling. FC-450-V has 18 in. work cube, and can be configured to include 10 hp spindle, 40 or 50 taper, and HSK 63 or HSK100 tooling. FC-630-V has 25 in. work cube, and can be configured with 20 hp spindle with 50 taper or HSK100 tooling. It can be configured with 7 1/2 or 10 hp spindle...

Read More »
Can Tab Lubricator cuts oil use, reduces rejects.
Chain and Bearing Lubricators

Can Tab Lubricator cuts oil use, reduces rejects.

MicroCoat(R) lubrication method gives can makers control over amount of oil applied to pull tabs. It lowers lubricant use and reduces residual oil that can migrate from tabs and lids into can contents. It has precision spray valves that use low volume, low pressure (LVLP) air to coat pull tab stock with fine film of oil that keeps dies sharp, eliminates pressroom mist and puddles, and minimizes...

Read More »
End Mills are available uncoated and TiAIN coated.
Mills

End Mills are available uncoated and TiAIN coated.

WavCut(TM) multi-flute end mills utilize sinusoidal wave on cutting edges. Rake geometry forms hollow chip for chip evacuation, and heat-treated M42 cobalt material with drawn shanks results in heat resistance and additional strength. WavCut I end mills have constant rake, while WavCut II end mills have variable rake. They are available with 4 (heavy profiling and corner work) or 6 (light to...

Read More »
Ground Pin and Solid Blades feature crimp ears.
Blades

Ground Pin and Solid Blades feature crimp ears.

U-shaped ground pin and solid blades are supplied in strip form. They are made from plain- or tin plated-brass, and are used for hospital grade connectors and other critical applications. Crimp ears increase wire attaching speeds. Available in sizes for crimping 18 to 10 ga wire, units eliminate need for soldering process. Blades are UL 1659 certified.

Read More »
Motors

DC Mode Motor is based on ultrasonic standing waves.

DC Mode of motor operation yields moves of 1 nanometer. Its methodology combines resonant mode with non-resonant mode. Once in position, non-resonant mode can generate moves from 1 to 300 nm for ultra fine positioning. Features include unlimited travel and no intrinsic magnetic field. Ability to drive linear or rotary devices suits this technology to applications in semiconductors, fiber optics,...

Read More »
Cam Clamps suit machine shop applications.
Cams

Cam Clamps suit machine shop applications.

Series HDC Heavy Duty Cam Clamps withstand continuous industrial use while providing significant speed benefits over conventional strap clamps in repetitive machining tasks. Styles include both clockwise and counter-clockwise clamping actions, hand or mallet applied actuation, and cam-swing or cam-ram design. Clamping force is from 675 to 11,200 lbs.

Read More »
Semi-Automatic Saw performs wet abrasive cutting.
Cut-Off Machinery

Semi-Automatic Saw performs wet abrasive cutting.

Model K20E totally enclosed saw features 15 hp SD motor with magnetic starter, 1950 rpm 1 in. spindle arbor, and coolant pump system with dual coolant hoses. Operation includes manual feed with air over oil precise downfeed, and automatic saw head return at end of cut. Adjustable down stop limits depth of cut. Unit includes V-belt drive, sealed ball bearings, air chain vise, and front and side...

Read More »
Combination Sander includes belt and disc.
Sanders

Combination Sander includes belt and disc.

Model S613v is equipped with 6 x 48 in. belt and 12 in. solid aluminum disc. Belt side of sander features 6 x 10 in. worktable with 1/2 x 1/8 in. slot, 6 1/2 x 14 in. steel platen, and belt speed of 2800 fpm. Disc side features 8 x 14 in. cast iron worktable and disc speed of 2500 fpm. Sander is powered by 3 hp TEFC motor, and can be supplied with or without enclosed stand and built-in 100 cfm...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers