Machinery & Machining Tools

Machinery & Machining Tools

Machine-Tool Drills have multiple phasing ability.

Apr 16, 2002

Machine-tool models include Holeshot(TM) Indexable Drills, Stinger(TM) Small Diameter Drills and Coremaster(TM) Core Drills. Holeshot(TM) large drills, with multiple phasing, drill stacked or welded assemblies. Stinger(TM) drills require flood coolant only, and in some cases cut dry. Small Diameter drills provide smooth chip flow. Coremaster(TM) drills allow cored holes to be straightened in one... Read More

Machinery & Machining Tools

Toolholding System provides rigid, stable contact surface.

Apr 16, 2002

MDT(TM) uses single toolholder and insert for turning, profiling, and grooving in both axial and radial directions. For complex components with many grooves and profiles, one tool replaces several conventional tools for simplified tool handling and stocking requirements. It can handle wide variety of face machining operations and has PCBN inserts for tougher materials and small diameter boring... Read More

Machinery & Machining Tools

Screw Machines are offered with up to 12 axes.

Apr 16, 2002

DECO 20a and 26a have bar capacities up to 20 and 26 mm dia, respectively. Model 20a provides up to 10,000 rpm spindle speeds powered by 5.5 kW motor. Model 26a offers up to 8,000 rpm spindle speeds with 7.5 kW motor. Left-to-right door opening allows access to work area from front and top. TB-DECO software permits fast program generation and data transfer to machine. It offers tool collision... Read More

Machinery & Machining Tools

End Mills machine broad range of materials.

Apr 11, 2002

Manufactured from premium M42 Cobalt steel, Roughing End Mills can be used to machine steel, stainless steel, titanium, cast iron, nickel, copper, aluminum, and magnesium. They have all-ground roughing profile with center cutting end tooth geometry that allows for plunging and profiling. Uncoated, TiCN and TiCN surface finishes are available. APPLIX(R) MX Series DIN overall length production taps... Read More

Machinery & Machining Tools

Machining Centers offer various speeds.

Apr 11, 2002

DIGMA VMC offers 1.7 g acceleration, 42000 rpm and 1576 ipm travel. Spindles have multi-temperature sensors for spindle length compensation through machining process. Mach CNC 647 is for short and long runs of parts up to 1/4 in. dia. It has 12000 RPM rotating toolhead, 4 independent cutting tools, and backworking capabilities. K'MX Swing 1026 Swiss turning center has 26 mm bar capacity, main and... Read More

Controls & Controllers, Machinery & Machining Tools, Material Handling & Storage, Software

Sortation Control runs on Windows(R) NT/Windows 2000.

Apr 11, 2002

FASTSort(TM) includes configurable software for I/O and device controls, sortation tracking and acknowledgement, and performance diagnostics. It provides sortation control, including scan, track, sort, confirm, report and statistics features. FASTSort supports up to 27 tachometers, 800 input devices, 800 output devices, and multiple induct scanners. It controls all divert methods, including tilt... Read More

Machinery & Machining Tools, Packaging Products & Equipment

Impeller Packer handles particle sizes of 10 mesh and smaller.

Apr 11, 2002

Model I is designed for heavy, dense, difficult to feed powders and fine granular mixtures. Weigh Mast design provides stable structure to support bag. Available with single or multiple spouts, fill range is 15 to 110 lbs, handling up to 540 bph per spout with accuracy of +/-.3 lb. Model I uses concave paddle style impeller to propel product through spout and into bag. Precision regulator meters... Read More

Machinery & Machining Tools

Thread Grinding Machine handles small dimensions.

Apr 10, 2002

Compact Tapomat 1000 produces right or left hand threads from 0.8 - 4 mm, chucking lengths up to 100 mm, and grinding lengths up to 50 mm. Its hydraulic power pack, coolant pumps and electrical cabinet are inside enclosure and flush with machine's profile. Control system swivels in or out for operator convenience. Grinder has 6.5 hp wheelhead spindle motor. Operator can manually angle wheelhead... Read More

Machinery & Machining Tools

Fiber Handler provides 3 fiber interfacing options.

Apr 10, 2002

Model 1200 Automated Fiber Handler automates optical fiber stripping, cleaning, cleaving, and temporary coupling activities. Self-contained, modular package includes FK11 Ultrasonic Cleaver and 1100 Single Fiber Aligner. Its fiber interfacing options include manual deployment, semi-automated operation, and full test automation. Read More

Machinery & Machining Tools, Material Handling & Storage

Grinding Wheels utilize X10 technology.

Apr 10, 2002

Neptune roll grinding wheels resist softening when exposed to water-based coolants. Three different resin bond systems are available: Neptune SR (Soft Roll), Neptune MR (Medium Roll), and Neptune HR (Hard Roll). Roll grinding wheels are available from H to P grades in sizes from 12 to 42 in. in diameter with grit sizes from 30 to 220. They grind rolls made from cast iron, cast steel, forged... Read More

Machinery & Machining Tools

Press Production Unit offers interchangeable furnaces.

Apr 10, 2002

Hot Isostatic Press Production Unit (HIP) applies uniform pressure at elevated temperatures to all surfaces, making it suitable for castings, ceramics, plastics, automotive, and aerospace industries. Inside diameters range from 50 to 1,500 mm. Units contain pressures from vacuum to 3,000 bar and temperatures up to 4,000 deg F. They offer cascade control and fast cooling or uniform fast cooling to... Read More

Machinery & Machining Tools, Material Handling & Storage

Vises, Indexers, and 90 Deg Heads offer many configurations.

Apr 10, 2002

Bock Workholding Systems Twin Vises consists of 4, 8, 12, and 16 station MonoQuads. Twin Vises offers up to 8 in. jaw travel and quick change, reversible, fully machinable soft jaws. Hard-coated aluminum Bock Locator Plates with alpha numeric coded holes for baseline reference achieve +/-.001 in. repeat setups. Tsudakoma Indexers offer compact AC servo motors and full 4th axis interfaces. Right... Read More

Machinery & Machining Tools, Materials & Material Processing

Extrusion Equipment meets international standards.

Apr 10, 2002

Yellow Jacket blown film extrusion line meets CE specs for Europe and C-ETL for Canada. Control systems can be configured to operate on variety of global voltages, and contain screw, barrel and dies that process thermoplastics while overcoming variances due to country of origin. Lines consist of screw extruder, spiral blown film die, air ring with blower, blown film tower, dual razor slitters,... Read More

Fasteners & Hardware, Machinery & Machining Tools

Cutting Tool Inserts last 40% longer than before.

Apr 10, 2002

CoroCut(R) parting and grooving tools provide good surface finish and have 20 to 40% longer tool life than previous tools. They withstand high axial cutting forces, maximize feed without vibration, and work on materials ranging from aluminum to hardened steels and heat resistant super alloys (HRSAs). Tools are available in Grade H10 carbide, in PVD-TiAIN coated carbide grades, and in four... Read More

Machinery & Machining Tools

Grinding Machine has grinding head in six o'clock position.

Apr 10, 2002

TEG-3 Tungsten Electrode Grinding Machine prevents dust from being thrown upwards so that users can see clearly how grinding is progressing. It is designed for grinding tips on tungsten electrodes as used in Tungsten Inert Gas and Plasma welding. Tool will axially grind all diameters of tungsten welding electrode from 1.0 to 6.4 mm and lengths down to 15 mm with collet accessory. Its electric... Read More

Machinery & Machining Tools

Groove Tools are solid carbide.

Apr 08, 2002

Groove Tools are available in 18 sizes of each style (undercut groove and undercut/profile groove) to cover various widths and hole depths. Lockdown flat on shank automatically locates groove tools on center. Shank diameters range from 1/4 in. to 1/2 in. dia and are precision ground within -0.0001 in. to 0.0003 in. Read More

Machinery & Machining Tools

Insert Drills feature four cutting edges.

Apr 08, 2002

Top Cut Plus indexable-insert, coolant-fed drilling systems can use 3 different positive rake insert geometries, each with 4 cutting edges. Metric sizes are from 11 to 34 mm. The 2X diameter drill is used for maximum drilling rigidity; 3X drill is for general-purpose usage; and 4X is for deep hole drilling. All have rigid shanks that meet DIN 6595/IS0 9766 standard. Drills can be applied... Read More

Machinery & Machining Tools

Multiple Presses come with single control.

Apr 08, 2002

TMP modular presses combine multiple press units with unified controls and hydraulics. Systems are built on 1-piece bases and can be produced in multiples of 2 or 4 presses. Control system permits independent operation of each press and provides control of cycle time, temperature, and pressure. Press systems are available in 30, 50 or 100 tons with platen sizes of 12 x 12, 15 x 15, or 20 x 20 in.... Read More

Machinery & Machining Tools

Blaster cleans castings and forgings.

Apr 08, 2002

Super III Tumblast(TM) uses 15 in. bi-directional wheel with patented curved blades to provide batch cleaning of castings, forgings, and other metal working pieces. Its 14 cu ft work capacity makes it suitable for scale, rust, sand, and contaminant removal; preparing surfaces for coating, grinding or machining; and deflashing, deburring, and shot peening. Abrasive recycling system reclaims and... Read More

Machinery & Machining Tools

Trunnion Machine adapts to changing needs.

Apr 08, 2002

High Performance Trunnion (HPT) Machine features sliding spindle carriers that allow most cutting tools to be changed outside machine base in less than 1 minute. HPT is available with spindle horsepower of 5, 7.5 and 10 HP. Eight workholding stations are standard, and each is equipped with 2-jaw chuck that can use interchangeable top jaws. Control system uses Indramat® CNC and Indramat®... Read More