Thin-Film Lubricant handles high temperature and extreme loads.
Lubricants

Thin-Film Lubricant handles high temperature and extreme loads.

Tactless and colorless Ultra-Film does not contain moly, solids, or zinc. It deposits clean, semi-dry film suitable for oil-lubricated chains, trolleys, slat-type conveyors, and roller chains that are subject to loads up to 400,000 psi and temperatures to 600°F. Ultra-Film does not attract airborne pollutants and particulate, reducing risk of drippage and parts contamination. It is supplied...

Read More »
Grease can be applied around fresh or salt water.
Grease

Grease can be applied around fresh or salt water.

ALCO EP-73 Plus(TM) has water-resistant aluminum complex base and anti-wear additives. Polymer additives further enhance moisture and corrosion resistance and ability to adhere to all types of metal surfaces. Service rating is -25 to 400°F. Grease meets MIL-G-18458 (SH) and can be used for equipment in hot humid climates, steam, and applications that subject or submerge equipment in water....

Read More »
Lubricant reduces installation torque.
Lubricants

Lubricant reduces installation torque.

NYTORQ can be used on any fastener that requires controlled or lower drive torque during installation, such as tri-lobular and self-threading screws. Non-toxic, opaque colored lubricant has melting temperature of 248°F. It meets and exceeds Daimler-Chrysler specification MS9775.

Read More »
Lubricants

Lubricant reduces need for operational shutdowns.

Non-asphaltic Polyguard 4100 synthetic open gear lubricant reduces downtime and scheduled maintenance when performing ore mining and ball milling at extreme temperatures. Product allows for rapid set-up on gear teeth helping to prevent metal loss and reduces volatile organic carbon (VOC) emissions. Transparent amber color makes clean up, inspection, and maintenance simple.

Read More »
Lubricants

Lubricant maximizes gear and bearing life.

Mobil DTE 21® consists of balanced formulation with additives and low-viscosity base oils. It is specifically designed for high-speed, gear-driven spindle bearings in precision machining centers. Anti-wear and load-carrying ability is demonstrated by its performance in FZG DIN 51534 test, used to estimate lubricant's gear-load carrying capabilities.

Read More »
Lubricants

Synthetic Lubricants suit heavy-duty applications.

Formulated for use in long-life industrial and severe-duty applications, ViperLube(TM) lubricants are composed of synthetic PAO (polyalphaolefin) base stocks. They offer mechanical and thermal stability; high load carrying capability; and resistance to rust, corrosion, and water. Lubricants consists of NLGI Grade 2/Severe Duty GC-LB Grease, 90w Gear Oil, and 10w Lightweight Oil, all of which are...

Read More »
Lubricating Oils

Oil maintains engines fueled by natural gas.

Mobil Pegasus 905 offers extended drain capability and wear protection without sacrificing cleanliness. It reduces heat exchanger deposits in natural gas gathering, transmission, cogeneration, and combined heat and power applications. Oil consists of additive system with heavy, neutral basestocks and exhibits antioxidant characteristics, viscosity control, and thermal stability.

Read More »
Perfluorinated Oils and Greases are H-1 approved.
Grease

Perfluorinated Oils and Greases are H-1 approved.

Krytox® FG products, approved for H-1 food processing applications, perform at operating temperatures from -70 to +762°F (continuous use), are insoluble in water, and resist any water washout. Rust and corrosion resistant, they are also non-flammable and chemically inert. Compatible with all metals, elastomers, and plastics, products do not carbonize. Oils are clear, non-staining, and...

Read More »
Bearing Grease offers extreme thermal stability.
Grease

Bearing Grease offers extreme thermal stability.

Type G-75 grease is designed for high speed machine tool spindle bearings. It combines fully synthetic base oil with Polyurea thickener instead of barium complex soap thickener. G-75 operates at 1.5 M dN continously and is standard on all sealed angular contact bearings. It is available in 30 cc dispenser.

Read More »
Metalworking Fluids

Machining Fluid suits reaming and tapping applications.

Alusol® A semi-synthetic metalworking fluid is formulated for machining and grinding aerospace aluminum and aerospace alloys in either large central systems or single sump applications. It is chlorine-free, yet overcomes tool wear, poor surface finish and staining. Alusol A is extremely bioresistant, and provides wetting properties for penetration at point of cut with minimal fluid...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics