Grease is highly water resistant.
Grease

Grease is highly water resistant.

ALCO EP-73 Plus(TM) specialty grease, for all metal surfaces, adheres or injects effectively in fresh or salt-water applications. Aluminum complex base mixed with anti-wear additives provides -25 to +400°F service rating. It is suited for subsea, offshore, and marine applications and also acts as high-temperature bearing grease. Grease meets MIL-G-18458 (SH) and is available in sizes from...

Read More »
Synthetic Fluids offer oxidative stability.
Lubricants

Synthetic Fluids offer oxidative stability.

SpectraSyn(TM) synthetic polyalphaolefin basestocks feature viscosity ranges between 2-100 cSt at 100°C, and provide lubrication capabilities for car and diesel engines, gear boxes, and industrial applications. SpectraSyn Ultra(TM) Hi VI PAO products exceed 100 cSt viscosity. Synesstic(TM) AN Blendstock consists of API Group V category fluids manufactured to deliver hydrolytic, thermal and...

Read More »
Food-Grade Lubricants suit food processing machinery.
Lubricating Oils

Food-Grade Lubricants suit food processing machinery.

Nevastane® EP extreme pressure oils are offered with viscosities of 100, 150, 220, 320, 460, and 1,000. White oil based lubricants provide oxidation and rust protection as well as water separation. Non-toxic oils resist food acids and alkalis and are NSF H-1 Registered as part of the Hazard Analysis and Critical Control Point System. Lubricants are used in gear reducers, worm gears,...

Read More »
Grease

Bearing Greases meet variety of lubrication needs.

Molykote G-0100 mineral-based grease offers corrosion- and oxidation-prevention for motor bearings. Mineral oil-based Molykote G-0101 is suited for high-speed applications. Mineral oil-based Molykote G-0102 resists water washout. Multipurpose Molykote G-1001 suits most roller bearing applications. Synthetic oil-based Molykote G-2001 provides protection against wear and corrosion. Molykote G-6000...

Read More »
We Have Used Magnalube for the Same Applications Since 1985.
Sponsored

We Have Used Magnalube for the Same Applications Since 1985.

Explaining about the lubrication problems faced while manufacturing Wadsworth's energy curtains and vent automation systems, this paper details how Wadsworth Control Systems reduced friction and wear of plastic rollers sliding on steel rails, after switching to Magnalube-G. It describes how the PTFE-based Magnalube-G offered extended protection against rust and corrosion in most environments, and illustrates the ability of Magnalube-G grease, which continuously lubricates at temperature up to 130F. Also highlighted is Magnalube-G's paraffinic oil that doesn't react with sensitive plastic parts. The paper also explains how Wadsworth Control Systems have constrained the supply of lubricants to greenhouses after using Magnalube-G, which is required once in very long time.

Read More »
Lubricants

Forging Lubricant wets dies at temperatures to 1,000°F.

Heavy-duty, water-based Grade FW-3361 contains micro-fine graphite and EP additives to forge difficult, warm or hot, ferrous, non-ferrous, and super alloy metals. Also suited as back-extrusion lubricant, product can be used on dies with temperatures from 250 to 1000°F. Lubricant dilutes with water and is spray applied to dies for best results. Dilution ratios depend on job severity, and are...

Read More »
Food Grade Anti-Seize Compound has wide temperature range.
Anti-Seize

Food Grade Anti-Seize Compound has wide temperature range.

Able to withstand temperatures from -65 to +1,800°F, Tri-Flow® prevents seizing, galling, friction, and wear on stainless steel threaded parts and other metal-to-metal surfaces. USDA H1, NSF registered compound is formulated with Teflon® and other lubricating solids, blended into a non-melting grease carrier. Available in brush-top jars and aerosol cans, chemical- and...

Read More »
Food Grade Greases protect bearings and resist wash off.
Grease

Food Grade Greases protect bearings and resist wash off.

Type SFG fully-synthetic, food-grade greases are NSF H-1 Registered and have high load carrying properties. They are formulated using synthetic PAO base oil with premium complex calcium sulfonate thickener. Both grades protect across temperature range of -51 to +200°C, while demonstrating thermal and mechanical stability. They contribute to extended machine life while reducing contamination...

Read More »
Anti-Seize

Thread Treatment Products come in semi-solid stick form.

Loctite® Thread Treatment Sticks, suited for industrial maintenance programs, consist of threadlocking, thread sealing, and anti-seize products. Portable products include Loctite® 248 medium-strength, blue threadlocker; Loctite® 268 high-strength, red threadlocker; Loctite® 561 PST® pipe sealant with PTFE; Loctite® C5-A® copper-based anti-seize; and...

Read More »
Anti-Seize Compound is USDA H1 rated and NSF registered.
Anti-Seize

Anti-Seize Compound is USDA H1 rated and NSF registered.

Chemical- and stain-resistant Tri-Flow® Anti-Seize is formulated with Teflon® and other lubricating solids and blended into non-melting grease carrier to prevent seizing, galling, friction, and wear on stainless steel threaded parts and metal-to-metal surfaces. With temperature range of -65 to +1800 °F, product aids in assembly, sealing, and disassembly of pipe joints; nuts and...

Read More »
Cutting Fluid is translucent and chlorinated.
Metalworking Fluids

Cutting Fluid is translucent and chlorinated.

Biostable chlorinated semi-synthetic cutting fluid, Rustlick® Ultracut 375R, offers lubricity and rust protection for ferrous and non-ferrous metals. Translucent emulsion has chlorinated and non-chlorinated EP additives. Fluid is used for machining and grinding operations in machine shops and is available in 5 or 55 gal containers.

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics