Lubricating Oils

Synthetic Oil prevents oxidation in compressors.

AOSyn(TM) DE diester-based lubricants, formulated for oxidative resistance and minimal hydrocarbon deposit formation, incorporate ester basestock and additive technology to decrease risk of compressor detonation. With operating range of -40 to +210Â-ºC, series minimizes power consumption through lubricity and is available in ISO viscosity grades 32, 46, 68, 100, and 150. IT may be used on...

Read More »
Valve Lubricant and Sealant resists effects of chemicals.
Sealants

Valve Lubricant and Sealant resists effects of chemicals.

Dow Corning® 111 heavy-consistency, dimethyl silicone compound maintains serviceable consistency from -70 to +400°F. Acceptable as release agent under FDA 21 CFR 175.300, it carries NSF 51 and NSF 61 approvals. Product can be used as lubricant for rubber and plastic O-rings, water softener and faucet valves, and electronic and ignition systems. It may also be used as sealant in...

Read More »
Hydraulic Fluids

Hydraulic System Lubricant is environmentally friendly.

Polyolester-based Bio Guard(TM) FRHF series minimizes equipment wear and deposit formation in hydraulic systems. Ashless and silicon-free product meets industrial lubricant flammability specifications and is classified as biodegradable. Passing Vickers 35VQ 25A and Vickers 104C pump tests, fluid has fire point above 360Â-ºC and Autogenous Ignition Temperature above 420ºC. Product...

Read More »
Additives

Engineered Lubricants work on wood-plastic composites.

STRUKTOL® TPW 104 is designed for use in polyolefin compounds, whereas TPW 113 is designed for use in polyolefin-wood composites where formulation contains reactive chemical coupling agents. Suited for use in polyolefin and styrenic compounds, TPW 101 general-purpose lubricant blend improves pigment and filler dispersion and eliminates edge tearing. TPW 012 combines internal and external...

Read More »
Synthetic Oil meets farm and commercial equipment needs.
Hydraulic Fluids

Synthetic Oil meets farm and commercial equipment needs.

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil provides multi-viscosity, all-weather protection and enables equipment owners to avoid seasonal fluid change-outs. Incorporating oxidation inhibitors, formulation of synthetic base stocks and additives suppresses wet brake chatter and protects against rust and corrosion. Seal and hose conditioners reduce oil leaking and blown hoses, while...

Read More »
Olefins

Synthetic Drilling Fluids are US EPA-approved.

NEOFLO(TM) olefins are designed for changing environmental regulations in Gulf of Mexico and increasing standardization of environmental practices in other parts of world. Compliant with US EPA offshore discharge regulations, NEOFLO 1-58 internal olefin features linearity and purity that decreases sediment toxicity and improves biodegradability. Product also exhibits stability when exposed to...

Read More »
Synthetic Greases withstand harsh environments.
Grease

Synthetic Greases withstand harsh environments.

Composed of perfluoro polyether, NSF-H1 approved Molykote® HP-300 and HP-500 are stable in presence of chemicals, and insoluble in solvents and oils, with exception of fluorinated solvents. With temperature range of -65 to 250°C, greases are noncombustible with no danger of ignition. Due to chemically inert base, they have virtually no effect on plastics and rubbers. Applications...

Read More »
Synthetic Oil withstands up to 400 A.
Lubricating Oils

Synthetic Oil withstands up to 400 A.

Cosmetic-grade Rustlick EDM-500 offers combination of high dielectric strength and low power factor. It contains highly refined and purified non-hazardous chemicals that virtually eliminate skin irritation. It is odorless, transparent, and resists thermal degradation from high-amperage applications. Rustlick® EDM-500 can be used with all types of filters and is suited for use on all ferrous...

Read More »
Lubricants

Gear Lubricant is used in low-temperature applications.

Suited for industrial and automotive applications, 9919 SYNOLEC® All-Climate Gear Lubricant is made with 100% synthetic base fluid and contains MONOLEC® and extreme pressure (EP) wear reducing additives. True SAE 75W-90 grade lubricant does not use viscosity index improvers to achieve multi-grade characteristics. It has pour point of -60°F for optimal subzero weather flow...

Read More »
Metalworking Fluids

Cutting and Grinding Coolant features biostability.

Suited for metalworking industry, CLC Coolant CF 66 provides users with biostable micro-emulsion that contains no biocides, sulfonates, bactericides, chlorine, formaldehyde, or phenols. Product, free of foul odors, prevents buildup and rust problems and rejects tramp oil just as synthetic. It works on all metals, including stainless steel, cast iron, aluminum, and copper-based alloys.

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics