Hydraulic Fluids

TOTAL Nevastane Food Grade & Industrial Lubricants now in One-Way Totes

Linden, NJ, (September 21, 2006): TOTAL Lubricants USA, Inc. - formerly Keystone Lubricants - have expanded their lubricant packaging options to include 275-gallon Totes. Totes save space and cut handling time; a single tote has a footprint of only 48" X 42", and holds the equivalent of five, 55-gallon drums. Having an integral skid, it's easily placed where needed, using fork lift equipment. A...

Read More »
Lubricating Oils

Technical Chemical Announces a New Line of A/C Products

September 18, 2006-(Cleburne, TX )Technical Chemical Co. announces a new line of air conditioning lubricants, treatments and kits. The introduction of the Johnsen's brand air conditioning lubricants, treatments and kits is set for fall 2006. The formal introduction of the new product line will occur in Las Vegas at the AAPEX Show. Please stop by booth #1034 at the AAPEX show to see the new...

Read More »
Metalworking Fluid is designed for magnesium machining.
Metalworking Fluids

Metalworking Fluid is designed for magnesium machining.

Exhibiting emulsion stability, Blasocut® for Magnesium Machining (BC37MG) optimizes part machining capabilities while minimizing waste in magnesium machining without separation. Mineral oil-based, chlorine-free liquid tool has formula that counters issues of instability, separations, and short fluid life. Also suitable for other ferrous and non-ferrous materials, such as brass and/or...

Read More »
Grease

Greases lubricate linear systems.

Constructed from compound of super-filtered synthetic lubricants, MSG#1 and MSG#2 optimize smoothness and dynamic life of anti-friction linear bearing and ball screw systems. MSG#1 ensures glassy-smooth, non-sticky feel at low speeds where very fine positioning is required, while MSG#2 features higher penetration number so that it will stay in place during high speed motion, but not so stiff that...

Read More »
Johnny Dean Uses Magnalube-G
Sponsored

Johnny Dean Uses Magnalube-G

Briefing about the constant breakdowns of trailer hubs, trucks, and boats due to high temperatures, excessive braking, and salt water infiltration, this paper describes how Mr. Johnny Dean benefitted by using PTFE based Magnalube-G. Magnalube-G's performance in high temperature is highlighted, and how the reduction of wear and tear of the parts which are constantly exposed to dirt and humidity is explained. The reduced penetration of salt water into the exposed parts is also reported. The paper concludes with Mr Dean's comment on frequency of using Magnalube-G for better performance in offshore boats, farm equipment, saltwater reels, and any equipment which has a grease fitting.

Read More »
Nevastane SFG Spray Grease for Food Equipment is Offered in Free Sample
Grease

Nevastane SFG Spray Grease for Food Equipment is Offered in Free Sample

Linden, NJ, (August 31, 2006): TOTAL Lubricants USA, Inc. - formerly Keystone Lubricants - offers Nevastane® SFG synthetic food grade grease in a new 10 oz. spray can. TOTAL also offers it as a free sample in a 1.5 fl oz. (44.3 ml) spray can: log onto www.nevastane.com and follow instructions. TOTAL's Nevastane food grade lubricants are used on food processing machinery in all segments of the...

Read More »
Metalworking Fluids

Metalworking Fluid works with difficult materials.

Containing vegetable oil-based esters, Vasco 5000 is suited for machining titanium, stainless steel, cobalt chrome, and other difficult to machine materials. Liquid tool exhibits cutting and grinding performance that promotes extended tool life, accelerated cycle times, and optimal surface finish. Sump life of Vasco 5000 maximizes uptime and minimizes disposal while rinse behavior is...

Read More »
Klüber Is Proud to Offer Klübersynth UH1 6 Oils
Lubricating Oils

Klüber Is Proud to Offer Klübersynth UH1 6 Oils

Synthetic Gear and High-temperature Oils Meet Demands of Food-Processing and Pharmaceutical Industries Londonderry, NH - (August 3, 2006) - KlÃ-¼ber Lubrication delivers the newest technology in synthetic, high-temperature gear oils to the food-processing, beverage and pharmaceutical industries with Klübersynth® UH1 6 Series. Authorized in accordance with USDA-H1,...

Read More »
Silicone Lubricant gets in hard-to-reach areas.
Lubricants

Silicone Lubricant gets in hard-to-reach areas.

Formulated from blend of silicones, cross linkers, and oils, Chute Lube(TM) lubricates package handling equipment, food processing equipment, chutes, guides, and rail conveyors. Colorless, odorless product will not stain or cause packages to become greasy and is harmless to most rubbers and plastics. Available in 20 oz aerosol cans, Chute Lube(TM) is effective in wide range of temperatures and is...

Read More »
Animal and Vegetable Oils

Cutting Oil features vegetable-based formula.

Derived from renewable raw materials, Vascomill 22 generates minimal mist, vapor, or smoke during use in CNC machinery performing operations with tough materials such as stainless steels, titanium, high-temperature alloys, and beryllium copper. Formula helps extend tool life and lubricity while promoting skin compatibility for operators. While universal for most operations and materials, oil can...

Read More »
Metalworking Fluids

Grinding Fluids are able to run at low concentrations.

Offered in 2 versions, Grindex water miscible synthetic grinding fluids are suited for steel and iron. Mineral oil-free products provide optimal rinsing and settling behavior required in grinding operations. While Grindex 10 is considered common version, Grindex 10CO is highly inhibited for carbide grinding to prevent cobalt leaching. Both offer corrosion protection and are engineered to ensure...

Read More »

All Topics