Load Banks

Load Banks

DC Electronic Load reduces rack space by up to 50%.

Comprised of 15 models with peak power ratings from 1,200–7,200 W, EL 9000 B Series has 3U rack panel design and features FPGA-based digital function and arbitrary profile generator thatÂ- enable user-customizable load profiles. DSP hardware improves analog and digital interface response time, while current rise times as fast as 18 µsec (10%–90% load) are suited for testing...

Read More »
DC Electronic Load Module supports 300 W on each of 2 channels.
Load Banks

DC Electronic Load Module supports 300 W on each of 2 channels.

Intended for use with MDL Series modular programmable DC electronic load system, MDL302 supports full 300 W on each input channel withÂ- voltage and current operating range up to 80 V/45 A. Power density enables MDL Series mainframe to have up to 8 or more 300 W channels. Able to operate in constant current, constant voltage, constant resistance, constant power, and constant...

Read More »
Programmable Electronic Load reliably tests up to 200 W.
Load Banks

Programmable Electronic Load reliably tests up to 200 W.

Used for testing and evaluating DC power sources,Â- LD-200P can operate in CC, CV, CP, or CR mode while voltage/current or resistance/power values are measured and displayed in real-time. Load operates between 1 and 63 V, 10 mA to 15 A (200 W max) and offers resolution of 20 mV, 1 mA, 0.1 W, 0.1 Ω. For greater voltage or current outputs, multiple units can be connected in series or...

Read More »
DC Electronic Loads sink up to 240 A. .
Load Banks

DC Electronic Loads sink up to 240 A. .

Operating up to 500 V with power range from 250–1,500 W, Models 8610, 8612, 8614, and 8616 provide adjustable current slew rate, fast transient operation speeds up to 25 kHz, and built-in battery and LED test mode functions. Programmable units can operate in CV, CC, CR, and CW modes. Supplied in 19 in. rackmountable form factor, 16-bit measurement systems offer dual-line display and are...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
DC Electronic Load features synchronized AC output.
Load Banks

DC Electronic Load features synchronized AC output.

Designed for power supply, battery, and other DC load testing, ELR9000 Series features integral, grid-synchronized inverter designed to return up to 95% of load test energy back to grid. Rack-mounted unit is available with 3.5, 7, and 10.5 kW output — scalable up to 105 kW. FPGA-based operational controls include function generator and table-based regulation circuit for simulation of non-linear...

Read More »
Regenerative AC Load Bank reduces energy expense by 90%.
Load Banks

Regenerative AC Load Bank reduces energy expense by 90%.

Built around 60 kVA chassis, PEL Series simulates range of test capabilities and supports parallel use to meet requirements of higher-power applications. Series also accepts standard AC input ranges from 120–480 V and provides grid-synchronized, regenerated AC power output that returns 90% of equipment under test load power back to utility. Load settings modes include constant current, constant...

Read More »
Cummins forms Global Power Testing Partnership with Crestchic
Load Banks

Cummins forms Global Power Testing Partnership with Crestchic

Following a highly successful installation of four resistive-reactive loadbanks at global power leader Cummins' manufacturing plant in Fridley, Minnesota, Crestchic has been awarded preferred status to partner in testing its products across the globe. Cummins designs, manufactures, sells and services diesel engines and related technology around the world. It initially approached leading...

Read More »
DC Electronic Loads offer transient operation up to 25 kHz.
Load Banks

DC Electronic Loads offer transient operation up to 25 kHz.

Comprising 3 models ranging from 150–250 Watts, 8600 Series can sink current up to 60 A at wide voltage ranges up to 500 V. Programmable benchtop units can operate in constant current, constant voltage, constant resistance, and constant power modes. Built-in battery and LED test mode functions make loads suitable for testing variety of DC sources. For remote control and programming, series...

Read More »
Load Banks

Load Banks facilitate testing of diverse AC power sources.

With 700–3,750 kW capacity range and air-cooled power resistor, Taylor Load Banks provideÂ- contained, organized, and fully controllable load for testing of generators, UPS, and other AC power sources. Voltage options include all common 3-phase 50/60 Hz or 208–240/480 Vac dual voltage. Heavy-duty units, offered in portable and stationary versions, also include digital load...

Read More »
Electronic Loads simulate wide range of LED types.
Load Banks

Electronic Loads simulate wide range of LED types.

Intended for LED lighting power supply development and test applications, 41D and 42D LED Loads support 300 W each and are capable of handling voltages to 500 Vdc.Â- Up to 4 loads can be installed in 44M04 modular load chassis. Dual channel 42D5006 load module can simulate 2 LED strings for total of 8 strings per chassis. With PWM control interface, LED dimming features can be controlled and...

Read More »

All Topics