Linear Motors

Linear Induction Motor generates 2,900 N at 3% duty cycle.
Linear Motors

Linear Induction Motor generates 2,900 N at 3% duty cycle.

Operating at 400 Vac, 75 Hz, Model LMG-06-650-SSE features synchronous velocity of 675 ips. Non-contacting linear motor is encapsulated in stainless steel enclosure using 400°F potting compound, which protects components and seals against moisture. Three-phase coil assembly can be directly connected to AC line for single-speed applications or to adjustable frequency drive for variable speed...

Read More »
Linear Servomotor features 50 mm long forcer.
Linear Motors

Linear Servomotor features 50 mm long forcer.

Model L250SS Linear Shaft Motor has non-critical air gap up to 5 mm, which allows for flexible machining and installation. This also allows flexibility over length of stroke and is beneficial in applications that may cause build-up on shaft. Stroke lengths of 100-3,750 mm are available and unit is offered with continuous forces of up to 24 N and peak force of up to 94 N. Able to achieve...

Read More »
Linear Shaft Motor achieves sub micron resolution.
Linear Motors

Linear Shaft Motor achieves sub micron resolution.

Designed for ultra high-precision market, Linear Shaft Motor features ironless construction and cylindrical design that uses 100% of magnetic flux. All available magnetic flux cuts coils at 90° angle. Because it has no cogging issues and does not produce Eddy currents, motor does not dump heat into work point, which enables it to achieve sub micron motion profiles. Lack of inherent airflow...

Read More »
Linear Stepper Motor simplifies linear motion system design.
Linear Motors

Linear Stepper Motor simplifies linear motion system design.

Model PFL35T LINEARSTEP® tin-can type linear actuator offers direct linear motion without need for any mechanical transformers. Product has 35 mm OD and is available with 0.48, 0.96, and 1.2 mm lead screw pitches. In addition to neodymium magnets, features offered include bipolar and unipolar windings, up to 39.5 N force rating, rated voltages of 5 and 12 V, and 48 steps per revolution....

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Linear Shaft Motor achieves sub-micron motion profiles.
Linear Motors

Linear Shaft Motor achieves sub-micron motion profiles.

Featuring cylindrical design, Linear Shaft Motor is able to use 100% of magnetic flux, which cuts coils at 90° angle. Ironless unit has no cogging issues and does not produce Eddy currents, minimizing heat generation. Additionally, motor does not have inherent airflow restrictions, which also cuts heat production. Since motor does not dump heat into work point, it enables precise and...

Read More »
Linear Motor Kits are suited for low profile applications.
Linear Motors

Linear Motor Kits are suited for low profile applications.

To accommodate needs of scanning and imaging systems, custom micro-linear motor kits feature air-core linear motors that function with servo drives and offer true sinusoidal torque curves. In single- or multi-phase configurations, units can function as limited travel actuators or linear motors and integrate with sinusoidal motor controller electronics. Initial models have profiles below 0.5 in.,...

Read More »
Linear Stepper Motors accommodate custom requirements.
Linear Motors

Linear Stepper Motors accommodate custom requirements.

Available in unipolar or bipolar configurations, Saia® ULE Series provides constant positioning force to 400 N over full travel lengths to 300 mm in ambient temperatures ranging from -15 to +60°C. Compact 55 x 55 mm design and NEMA 23 mounting flange enable mounting in space-restricted applications such as valve control, positioning and adjustment systems, and control systems for...

Read More »
Linear Motors

ATK and NASA Report Initial 30-Day Findings from Development Motor (DM-2)

Data Confirm ATK Five Segment Solid Rocket Motor is Ready for Flight Testing Five-Segment Design Matures to Support Future Launch Vehicles with Significant Performance Improvements at Reduced Cost PROMONTORY, Utah - Data from the second successful five segment Development Motor (DM-2) test conducted by ATK (NYSE: ATK) and NASA show that the new motor performed precisely as designed, providing...

Read More »
Linear Motors

Linear DC Servomotor features peak force up to 27.6 N.

Measuring 20 x 28 x 70 mm, Model LM 2070 is suited for variety of positioning applications. Unit offers stroke lengths from 40-120 mm, maximum acceleration of 90 m/sÂ-², and maximum speed of 2.6 m/s. Version One uses 3 analog halls sensors for feedback, while Version Two, designed for sin/cos control, uses 2 analog Hall sensors. Motion controller is available with Serial or CAN interface.

Read More »
Linear Motors

Nippon Pulse Offers Parallel Cabling Option on LSM

Nippon Pulse introduces a new parallel option on its Linear Shaft Motor to simplify cable management and routing when using multiple motors with one encoder and one servo drive. One of the main benefits of the Nippon Pulse Linear Shaft Motor is its ability to drive two motors in parallel using only one encoder and one amplifier. Running traditional linear motion systems, including ball-screws,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers