Rotary Encoders offer Ethernet/IP interface.
High-resolution EVM58 Ethernet IP Encoders provide absolute machine position or velocity feedback to system controller via standard Ethernet/IP interface. Available in single or multi-turn configurations, they deliver up to 25-bit resolution. Units have 58 mm dia, with 10 mm shaft, and include diagnostic LEDs and M12 D-coded connectors that provide power to, and facilitate communication to and...
Read More »
Incremental Encoders enable flexible speed, position monitoring.
To accommodate diverse application requirements, available products include PC-programmable ITD2P optical encoder, PC-programmable BHF/BHG optical encoders and magnetic EcoMag encoders, EcoMag BRIH/BRID/BRIV magnetic encoders, and DIP switch-programmable BHK/BVK optical encoders. Available in various shaft designs, series allow both impulse count and rotational direction to be programmed. Users...
Read More »
The Scale Tape Solution for a Wide Variety of Applications
HEIDENHAIN's LIC 4000 Absolute Linear Encoder SCHAUMBURG, IL - Incorporating absolute technology to a multi-substrate scale tape linear encoder design, HEIDENHAIN offers the versatile LIC 4000. Besides its capability of absolute position measurement, this encoder is characterized by its high resolution of 1 nanometer and its fast, purely serial EnDat 2.2 interface. It will be featured at the...
Read More »
Numerik Jena Offers a Miniature Linear Scale for Tight Spaces
Jena, Germany - Known for its high quality miniature scales, Numerik Jena offers the Kit L4 encoder, a minimum configuration of a length-measuring system for use in situations where installation space is limited. Now available in North America through HEIDENHAIN Corporation, this extremely flat encoder allows for unusually wide mounting tolerances and a pre-alignment of the measuring module in an...
Read More »
Deploying Commercial Electronics in Rugged Environments
This white paper explores how Commercial Off-the-Shelf components can be used efficiently and cost-effectively in critical military applications.
Read More »
Absolute Optical Encoders deliver 27-bit resolution at 36,000 rpm.
Providing true absolute positioning in linear/rotary models, RESOLUTE(TM) has single-track optical scale that eliminates misalignment and allows wide setup tolerances. Resolution of 1 nm at up to 100 m/s accommodates linear and angle encoding applications, and absolute position is acquired immediately upon switch-on and without battery backup. Product reads fine-pitch, 30 Â-µm scale,...
Read More »
HEIDENHAIN Reaches New Heights with High Accuracy Encoder
SCHAUMBURG, IL - In order to continue to offer technologically leading products for cutting-edge high precision machines, HEIDENHAIN has developed the new exposed LIP 200 linear encoder. This encoder system has been designed to break both speed and resolution barriers and will be on display at the SEMICON Show in San Francisco from July 13-15 (Booth 820). Incorporating the loosest mounting...
Read More »
Optical Encoder offers speeds to 10 m/s. .
Available in linear and rotary versions, TONiC optical encoder provides fine resolution to 5 nm and operates in temperatures up to 70°C. High SNR combined with dynamic signal processing ensure low sub-divisional-error of less than ±30 nm. Auto-calibration, integral diagnostic LEDs, and IN-TRAC optical reference mark facilitate installation. Featuring 35 x 13.5 x 10 mm read-head,...
Read More »
Rotary Encoders withstand extreme conditions.
Available with stainless steel housing and IP67 or IP69K rating, DuraCoders® are protected against high-pressure and high-temperature washdowns and liquid ingress from immersion in water or contaminants. Units come with 2.5 in. housing and double row sealed bearing. Offered in solid shaft and hub shaft models, encoders provide shaft loadings up to 100 lb radial and 50 lb axial. SSI,...
Read More »
Linear Magnetic Encoders support up to 100 m measuring length.
Sealed to IP68, LM10 brings 100 m travel capability to machinery applications with high-speed, high-precision positioning requirements. Solid-state, non-contact design features read-head that rides at 0.1-1.5 mm standoff over self-adhesive magnetic strip scale, providing count for positioning with 5 Â-µm resolution at 20 m/sec and 1 µm at 4 m/sec. Resistant to shock, vibration, and...
Read More »
Linear Encoder Scale System provides ±5 µm/m accuracy.
Constructed of stainless steel, FASTRACK features track-mounted scale that can run across gaps up to 25 mm wide. This suits large, sectional machines used in flat-panel display and PV manufacturing applications as well as large CMMs that require removal of scale for transit. System consists of 2 miniature guide rails that secure low-profile scales with 8 x 0.2 mm cross-section while allowing them...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
