Lighting Ballasts

Electronic Ballast operates at 347-480 V, 50/60 Hz.
Lighting Ballasts

Electronic Ballast operates at 347-480 V, 50/60 Hz.

Centium® HCN-2S54-90C can operate one or two F54T5/HO lamps; one or two 55, 50, or 36/39 W Long Twin Tube lamps; or one or two 55 W Circline lamps. It features IntelliVolt-Hi technology, Programmed Rapid Start lamp ignition, and end-of-life protection circuitry. Auto-restrike eliminates need to reset power mains after replacing failed lamps. Ballast includes 20 ft remote-mounting...

Read More »
Electronic Ballast operates 1-4, T5/HO Fluorescent Lamps.
Lighting Ballasts

Electronic Ballast operates 1-4, T5/HO Fluorescent Lamps.

Centium® model ICN-4S54-90C-2LS operates 36/39, 50, and 55 W long twin tube lamps as well as F58T8 lamps. With IntelliVolt® technology, ballast works with lamps at any input voltage from 120-277 V, 50/60 Hz. High-low switching option allows fixture to control number of lamps in operation. Type CC rated for anti-arcing protection, unit has 1 in. high, low profile housing and 90°C...

Read More »
Electronic Ballasts feature instant-start design.
Lighting Ballasts

Electronic Ballasts feature instant-start design.

Optanium(TM) Ballasts for T8 lighting systems are offered in standard and low-watt designs with ballast factors of .88 and .78, respectively. Independent lamp operation allows other lamps to continue operating if one or more lamps should fail. Operation between 40 and 50 kHz helps prevent interference with infrared control systems. Ballasts are available for 1, 2, 3, or 4 lamps, on both 120 and...

Read More »
Ballast Replacement Kits facilitate installation.
Lighting Ballasts

Ballast Replacement Kits facilitate installation.

SmartMate® CFL Electronic Ballast Kits are designed for use with lighting fixtures operating Compact Fluorescent Lamps. They include mounting-plate adapter and color-coded lead wires which are pre-stripped to UL-required 3/8 in. on poke-in end and 5/8 in. on J-box connection end. Ballast features 0°F cold starting, flicker-free operation, and micro-controlled circuitry, which provides...

Read More »
Electronic Ballast offer continuous dimming and 95% efficiency.
Lighting Ballasts

Electronic Ballast offer continuous dimming and 95% efficiency.

SuperBallast(TM) is designed for high- or low-bay HID lighting applications. Fast-Start(TM) feature provides quick ramp-up time and lamp-preserving startup. Ballast delivers full light output in less than 75 seconds. Continuous dimming capability allows infinitely variable dimming down to 35% of power. Lamps can be dimmed using standard 0-10 V feedback from control devices. Flicker-free...

Read More »
Dimming Ballast operates Compact Fluorescent Lamps (CFLs).
Lighting Ballasts

Dimming Ballast operates Compact Fluorescent Lamps (CFLs).

Mark X® Powerline Dimming Ballast operates two 32 or 42 W Triple CFLs or one 57 or 70 W Triple CFL. It delivers full-range (100% to 5%) continuous dimming capability. Suited to meeting rooms, presentation spaces, and computer-intensive work areas, ballast takes dimming signal directly from power line and operates with wall box dimmers, architectural dimmers, and occupancy sensors. It...

Read More »
Lamp Ballasts meet new pulse start specs.
Lighting Ballasts

Lamp Ballasts meet new pulse start specs.

Linear Reactor ballasts for pulse-start metal halide lamps have automatic reset thermal protection that interrupts power to ballast in event of abnormal lamp or ballast failure. They meet existing and newly proposed pulse-start ANSI specifications. Ballasts are available for various metal halide lamp wattages, including: 150 W (ANSI Code M102/M142), 200 W (M136), 250 W (M138/M153), 320 W...

Read More »
Fluorescent Lamp Ballast operates two 32 or 42 W triple CFLs.
Lighting Ballasts

Fluorescent Lamp Ballast operates two 32 or 42 W triple CFLs.

Mark VII® 0 to 10 V Dimming Ballast operates one 57 or 70 W Triple CFL (Compact Fluorescent Lamp). Model IZT-2T42-M3-LD has color-coded dual-entry connector and side mounting tabs, and model IZT-2T42-M3-BS offers bottom mounting studs and single-entry connector. Former provides 100% to 5% dimming and allows lighting control across branch circuits, while latter offers IntelliVolt®...

Read More »
Dimming Ballasts offer 1- or 2-lamp operation.
Lighting Ballasts

Dimming Ballasts offer 1- or 2-lamp operation.

Mark VII® 0-10 V Dimming Ballasts are for use with T5/HO fluorescent lamps, including 54 W linear lamps, 55 W circline lamps, and 55 W long twin tube lamps. They operate on 120 or 277 V systems. Units dim lamps directly from compatible 0-10 V controls, including occupancy sensors and ambient light sensors. They include programmed-start lamp ignition, THD below 10%, end-of-life protection...

Read More »
Ballast Replacement Kits fit HID applications.
Lighting Ballasts

Ballast Replacement Kits fit HID applications.

Suitable for metal halide and high pressure sodium lamps, 5-TAP ballast replacement kits include pre-insulated lead for use on each of five U.S. voltage systems: 120, 208, 240, 277, and 480 V. Pre-insulated leads for each voltage tap help assure safety and eliminate need to terminate unused leads with wire nuts. All necessary mounting hardware and detailed instructions are included with each kit....

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers