Lighting Ballasts

Electronic Ballast suits hi-bay fixtures.
Lighting Ballasts

Electronic Ballast suits hi-bay fixtures.

Centium® Electronic Ballast for 4-Lamp T5/HO lamp applications is available in 16.7 in. housing with integral leads. IntelliVolt® multiple-voltage technology enables operation at any input voltage from 120-277 V, 50/60 Hz. Programmed-start ignition insure optimum lamp life in frequent switching applications. Ballast features 90°C case temperature rating, total harmonic distortion less than...

Read More »
Ballasts convert fluorescent lights into emergency lights.
Lighting Ballasts

Ballasts convert fluorescent lights into emergency lights.

Embassy Series ballasts turn standard fluorescent fixtures into emergency lighting. When AC power fails, battery packs shift to emergency mode, providing 90-120 min of emergency run time for one or 2 lamps. When AC power is restored, unit recharges battery in 24 hr. Usable with switched or unswitched fixtures, compact models are available in quad, twin-tube, or triple twin-tube fixtures. Lumen...

Read More »
Dimming Ballasts work with 1- and 2-lamp long twin tubes.
Lighting Ballasts

Dimming Ballasts work with 1- and 2-lamp long twin tubes.

Mark 10 Powerline electronic dimming ballasts take dimming signals directly from power line, delivering 100%-5% continuous dimming capability. Encased in 9.50 x 1.70 x 1.18 in. housings, models for 1- and 2-lamp long twin tube fluorescent lamp applications feature dedicated voltage of 120/277 V, 60 Hz and can control 36 and 39 W long twin tube lamps in addition to 40 W lamps. All models are...

Read More »
Ballasts suit low-wattage metal halide applications.
Lighting Ballasts

Ballasts suit low-wattage metal halide applications.

Low-wattage, metal halide F-Can ballasts incorporate Xtenza® wide-range ignitor, which supports applications involving up to 50 ft of remote ballast-to-lamp mounting distance. Available in 70, 100, and 150 W single-ended lamp versions, ballasts feature 120/277 V or 120/347 V, 60 Hz dual-voltage input and auto-reset thermal protection for both voltage taps. Products are suited for indirect...

Read More »
Ballast supports UV disinfection market.
Lighting Ballasts

Ballast supports UV disinfection market.

Microprocessor-controlled PureVOLT(TM) electronic ballast is designed to operate 800 mA High Output (HO) germicidal UV-C lamps, which aid in stopping spread of microorganisms, airborne contaminants, and pathogens. Single unit will operate one or two 35 or 60 W HO or one 95 W HO low-pressure mercury germicidal UV twin tube lamp. Product offers dual entry, color-coded connectors, end-of-lamp-life...

Read More »
HID Ballast suits track or downlighting applications.
Lighting Ballasts

HID Ballast suits track or downlighting applications.

Electronic e-Vision® ballast, for 100 W Mini whiteSON lamp, effectively highlights warm color schemes and is suited for retail, grocery, and hospitality settings. Available with side leads or bottom leads with studs, ballast features IntelliVolt technology, which allows unit to operate at any input voltage from 120-277 V, 50/60 Hz.

Read More »
Ballasts support high-wattage compact fluorescent lamps.
Lighting Ballasts

Ballasts support high-wattage compact fluorescent lamps.

SmartMate® ballasts support PL-H(TM) lamps from Philips. One ballast can operate one or two 60 W lamps, one 85 W lamp, or one 120 W lamp. Available in 13-120 W range, ballasts are rated to 90°C maximum case temperature, provide up to 20,000 hr life, and can start lamps from -30°C. Features include dual-entry, color-coded connectors, end-of-lamp-life protection, and Intellivolt® technology to...

Read More »
Dimming Ballast suits range of CFL applications.
Lighting Ballasts

Dimming Ballast suits range of CFL applications.

Mark 7(TM) Electronic Dimming Ballast supports 8 compact fluorescent lamp/ballast combinations including 13 W and 18 W applications. It includes programmed-start lamp ignition, total harmonic distortion below 10%, color-coded poke-in connectors, lamp end-of-life protection circuitry, and operation above 42 kHz. Unit dims lamps directly from compatible 0-10 V controls, including occupancy sensors,...

Read More »
Ballasts drive two 57 or 70 W compact fluorescent lamps.
Lighting Ballasts

Ballasts drive two 57 or 70 W compact fluorescent lamps.

SmartMate® Ballasts offer programmed lamp ignition for extended lamp life in frequent switching applications. Model ICF2S70-M4-BS has bottom studs and single-entry connector, while Model ICF2S70-M4-LD features length mounting feet and dual-entry connector. Maximum case temperature is 90°C. Intellivolt® technology allows operation at any input voltage from 120-277 V, 50/60Hz. Units include...

Read More »
Dimming Ballast is designed for 18 W CFL operation.
Lighting Ballasts

Dimming Ballast is designed for 18 W CFL operation.

Encased in 3.00 X 4.55 X 1.29 in. housing, Mark 10(TM) Powerline Dimming Ballast is available for operation of one or two 18 W Triple or Quad Tube Compact Fluorescent Lamps (CFLs). Product delivers 100%-5% continuous dimming capability and takes dimming signals directly from power line. Features include programmed-start operation that provides lamp ignition at any light setting, operation above...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics