Surface-Mount LEDs have non-diffused lenses.
PLCC SMD LEDs incorporate lead frame profile that improves heat dissipation. Due to 2,500 k/W thermal resistance rating, devices can be driven with higher currents for enhanced brightness. Products are offered in various colors with typical luminous intensity from 500-3,000 mcd when driven with forward current of 70 mA. LEDs are suited for backlight usage in signs, networking systems, and...
Read More »
LEDs target outdoor, sunlight applications.
Super flux LEDs operate at current levels as high as 170 ma to deliver brightness output of 25,000 mcd. They can also operate at lower current levels of 20 ma where brightness output falls to 3,000 mcd. For lower input current applications, connector uses only 2 terminals of LED. In case of higher current outdoor requirements, 4 terminals are used, providing effective heat sink. Applications...
Read More »
LEDs target outdoor, sunlight applications.
Super flux LEDs operate at current levels as high as 170 ma to deliver brightness output of 25,000 mcd. They can also operate at lower current levels of 20 ma where brightness output falls to 3,000 mcd. For lower input current applications, connector uses only 2 terminals of LED. In case of higher current outdoor requirements, 4 terminals are used, providing effective heat sink. Applications...
Read More »
Level Indicator is visible under low light conditions.
Suited for Magnicator II-® magnetic level gages, LevelStar bi-color LED indicator delivers across-the-plant visibility in day and night conditions. Lights provide continuous service life exceeding 80,000 hr. With no mechanical or moving parts, product is available in 120 and 240 Vac options and FM Approved for use in hazardous environments. Standard and customized color options are available.
Read More »
The ROI of a Full Service Manufacturer
Full service manufacturers incorporate a complete line of production capabilities to facilitate fast, cost-efficient manufacturing of complex products without the need for multiple contractors.
Read More »
Level Indicator is visible under low light conditions.
Suited for Magnicator IIÃ-® magnetic level gages, LevelStar bi-color LED indicator delivers across-the-plant visibility in day and night conditions. Lights provide continuous service life exceeding 80,000 hr. With no mechanical or moving parts, product is available in 120 and 240 Vac options and FM Approved for use in hazardous environments. Standard and customized color options are available.
Read More »Fiber Optic Devices are offered in various styles.
CFE370, CFD470 and CFR520 feature self-aligning plastic lens caps, while CFR530 is a flat window, metal lens can device that provides hermetic seal. CFE370 contains an 850 nm AlGaAs DDH high speed fiber optic emitter with microlens centered on chip for efficient coupling. CFD470 contains 850 nm fiber optic PIN photodiode with 950 mil-² active area. CFR520 and CFR530 contain 5 Mb direct coupled...
Read More »Fiber Optic Devices are offered in various styles.
CFE370, CFD470 and CFR520 feature self-aligning plastic lens caps, while CFR530 is a flat window, metal lens can device that provides hermetic seal. CFE370 contains an 850 nm AlGaAs DDH high speed fiber optic emitter with microlens centered on chip for efficient coupling. CFD470 contains 850 nm fiber optic PIN photodiode with 950 milÃ-² active area. CFR520 and CFR530 contain 5 Mb direct...
Read More »
Emitters offer mini-DIL package.
Pigtailed, 6-pin mini-DIL package is available for all 850, 1310, and 1550 nm F-P laser and ELED devices, as well as single-element 850, 905, and 1550 nm pulsed-laser devices. Fiber types range from single-mode to 100 -µm multimode with max cladding diameter of 140 µm. Package features laser-welded fiber alignment and hermetic metallized fiber technology. Pins are arranged on 2.54 mm lead...
Read More »
Emitters offer mini-DIL package.
Pigtailed, 6-pin mini-DIL package is available for all 850, 1310, and 1550 nm F-P laser and ELED devices, as well as single-element 850, 905, and 1550 nm pulsed-laser devices. Fiber types range from single-mode to 100 Ã-µm multimode with max cladding diameter of 140 õm. Package features laser-welded fiber alignment and hermetic metallized fiber technology. Pins are arranged on 2.54 mm...
Read More »Wedge-Based LEDs replace incandescent bulbs.
Featuring non-polarized design, 586 series LEDs includes T 3 wedge and T 1 wedge in 6, 12, 14 and 24 Vdc versions. Products mount directly into industry-standard sockets and replace subminiature and miniature incandescent lamps. Using AlInGap and InGaN technology in multi-LED design, units provide ability to mix colors, last up to 100,000 hr, resist shock and vibration, and generate no heat....
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
