Light Emitting Diodes (LED)

IR Emitters are optimized with 850 nm wavelength.

New Devices Target CMOS Camera Applications, Automotive Night-Vision, and Sensor Systems MALVERN, PENNSYLVANIA - July 28, 2004 - Two new infrared emitters aimed at CMOS camera and high-speed IR data transmission applications were launched today by Vishay Intertechnology, Inc. (NYSE: VSH). The new high-speed, high-radiant power devices are optimized with an 850-nm wavelength to improve the optical...

LED Light Source cures adhesives in seconds.

Able to cure various UV- and visible light-cure adhesives in seconds, hand-held Loctite-® 7700(TM) offers typical output of 500 mW/cm² at wavelength of 405 nm. Portable curing system measures 9 x 1 x ¾ in. and weighs less than 0.5 lb. Suited for applications in crowded or hard-to-reach areas, unit may be powered via rechargeable batteries or ac adapter. LED technology allows product to...

LED Light Source cures adhesives in seconds.

Able to cure various UV- and visible light-cure adhesives in seconds, hand-held LoctiteÂ-® 7700(TM) offers typical output of 500 mW/cm² at wavelength of 405 nm. Portable curing system measures 9 x 1 x ¾ in. and weighs less than 0.5 lb. Suited for applications in crowded or hard-to-reach areas, unit may be powered via rechargeable batteries or ac adapter. LED technology allows...

Designed to replace T-1 -¾ wedge-based incandescent bulbs, WB5 Series LEDs feature flat-faced lens design with internal reflector for light intensity. Subminiature products, rated 2.5-48 Vdc, measure 0.80 in. long and 0.230 in. in diameter. With service life rated at up to 100,000 hr, LEDs require typical operating current from 10-30 mA and come in 10 standard colors. Custom colors and...

Super Precision Bearings for Machine Tools: Factors For A Successful Spindle Bearing Set Up

This white paper provides an in-depth overview into choosing the right bearing for machine tools.

Designed to replace T-1 Â-¾ wedge-based incandescent bulbs, WB5 Series LEDs feature flat-faced lens design with internal reflector for light intensity. Subminiature products, rated 2.5-48 Vdc, measure 0.80 in. long and 0.230 in. in diameter. With service life rated at up to 100,000 hr, LEDs require typical operating current from 10-30 mA and come in 10 standard colors. Custom colors and...

LED Indicators allow lamp changes after installation.

Series SSF-LXH4RA right-angle LED indicators mount to printed circuit board without additional spacers or mounting hardware. Construction enables any 2-leaded LED to be installed before or after sockets have been soldered to board, which also allows users to change color or brightness. Products are available in 9 standard units in red, green, yellow, bi-color red/green, and blinking red versions....

LED Indicators allow lamp changes after installation.

Series SSF-LXH4RA right-angle LED indicators mount to printed circuit board without additional spacers or mounting hardware. Construction enables any 2-leaded LED to be installed before or after sockets have been soldered to board, which also allows users to change color or brightness. Products are available in 9 standard units in red, green, yellow, bi-color red/green, and blinking red versions....

Surface Mount LEDs include built-in reflector.

Menands, New York: Marktech Optoelectronics announces the availability of its new Side Look (View) Surface Mount LEDs. The LS1 side emitting LED series offers high reliability and is ideally suited for light guide applications. The 4.0 x 4.0mm package offers more light output than traditional right angle packages. With a large 2.4mm diameter lens, this package is able to deliver maximum light...

Surface Mount LEDs include built-in reflector.

Menands, New York: Marktech Optoelectronics announces the availability of its new Side Look (View) Surface Mount LEDs. The LS1 side emitting LED series offers high reliability and is ideally suited for light guide applications. The 4.0 x 4.0mm package offers more light output than traditional right angle packages. With a large 2.4mm diameter lens, this package is able to deliver maximum light...

LED Panel Indicator can be seen from up to 100 ft.

PALATINE, IL--Lumex Inc. is introducing a new series of jumbo LED panel indicators that can be seen from distances as great as 100 feet (over 30 meters). The SSI-LXH20R6 series resembles a standard LED--except its diameter is a very large 0.79 inches (20mm). It's ideal for use in industrial and process control annunciator panels, or in anywhere a bright and highly-visible indicator is needed. In...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.