Light Emitting Diodes (LED)

Light Emitting Diodes (LED)

OLED Driver IC enhances visual performance.

Model LDS522 65K color OLED driver IC with integrated controller supports 128 (RGB) x 68, 128 (RGB) x 36, and 96 (RGB) x 68 display resolutions. Integrating 139 kbits of full frame memory, on-chip oscillator, DC/DC converter, and temperature sensor, LDS522 SoC provides accurate color images for MP3 player and mobile phone sub-display applications. Two independent settings for RGB reference...

Read More »
Light Emitting Diodes (LED)

Flash LED Driver IC is suitable for high-intensity LEDs.

Supplying 1.2 A output current and operating at 2.4 MHz switching frequency, Model SP7685 features programmable Flash current and Torch mode where constant light is needed. Built-in 2 sec timeout function at Flash mode protects LEDs from thermal runaway. Features include 2.7-5.5 V VIN range, 50 mV reference for low loss sensing, IQ less than 1 -µA in shutdown, over-voltage protection on output,...

Read More »
Light Emitting Diodes (LED)

Flash LED Driver IC is suitable for high-intensity LEDs.

Supplying 1.2 A output current and operating at 2.4 MHz switching frequency, Model SP7685 features programmable Flash current and Torch mode where constant light is needed. Built-in 2 sec timeout function at Flash mode protects LEDs from thermal runaway. Features include 2.7-5.5 V VIN range, 50 mV reference for low loss sensing, IQ less than 1 Â-µA in shutdown, over-voltage protection on...

Read More »
Light Emitting Diodes (LED)

Cree XLamp® LEDs Power New Grote Vehicle Interior Lights

DURHAM, NC, AUGUST 22, 2006 - Cree, Inc. (Nasdaq: CREE), a leader in LED solid-state lighting components, today announced that Grote Industries, a leading designer and manufacturer of vehicle safety systems, is building its new line of interior dome lights with white Cree XLamp® power LEDs. Grote's new product line uses less power, lights instantly in cold temperatures, generates less heat and...

Read More »
Light Emitting Diodes (LED)

Cree XLamp-® LEDs Power New Grote Vehicle Interior Lights

DURHAM, NC, AUGUST 22, 2006 - Cree, Inc. (Nasdaq: CREE), a leader in LED solid-state lighting components, today announced that Grote Industries, a leading designer and manufacturer of vehicle safety systems, is building its new line of interior dome lights with white Cree XLamp-® power LEDs. Grote's new product line uses less power, lights instantly in cold temperatures, generates less heat and...

Read More »
IR Emitter is designed for CCD based imaging applications.
Light Emitting Diodes (LED)

IR Emitter is designed for CCD based imaging applications.

The new BIR Series is available in a CCD-Optimized 850nm peak wavelength and a typical output power rating of 45mW/sr at an industry leading 120º viewing angle. Chino, Ca. August 4, 2006 - American Bright Optoelectronics Corporation introduced the BIR-PP8-DSS-1 NovaLED IR emitter that has been designed specifically for CCD based imaging applications such as machine vision, security, military,...

Read More »
IR Emitter is designed for CCD based imaging applications.
Light Emitting Diodes (LED)

IR Emitter is designed for CCD based imaging applications.

The new BIR Series is available in a CCD-Optimized 850nm peak wavelength and a typical output power rating of 45mW/sr at an industry leading 120-º viewing angle. Chino, Ca. August 4, 2006 - American Bright Optoelectronics Corporation introduced the BIR-PP8-DSS-1 NovaLED IR emitter that has been designed specifically for CCD based imaging applications such as machine vision, security, military,...

Read More »
LED Lamps feature T 3 ¼ miniature bayonet or screw bases.
Light Emitting Diodes (LED)

LED Lamps feature T 3 ¼ miniature bayonet or screw bases.

Designed to mount directly into industry-standard sockets for replacement of miniature incandescent lamps, variable input 586 VIP Series delivers 100,000 hr service life. LEDs utilize VIP technolgy to provide 6-36 Vdc variable operation with constant light output. Incorporating AlInGaP and InGaN technologies, RoHS-compliant units draw 10 mA and are available in red, green, yellow, blue, and white...

Read More »
LED Lamps feature T 3 -¼ miniature bayonet or screw bases.
Light Emitting Diodes (LED)

LED Lamps feature T 3 -¼ miniature bayonet or screw bases.

Designed to mount directly into industry-standard sockets for replacement of miniature incandescent lamps, variable input 586 VIP Series delivers 100,000 hr service life. LEDs utilize VIP technolgy to provide 6-36 Vdc variable operation with constant light output. Incorporating AlInGaP and InGaN technologies, RoHS-compliant units draw 10 mA and are available in red, green, yellow, blue, and white...

Read More »
Wedge Based LEDs come in various colors and sizes.
Light Emitting Diodes (LED)

Wedge Based LEDs come in various colors and sizes.

Suited for replacing incandescent lighting in harsh environments as well as aging equipment, LED wedge based lamps are available in bright white, amber, red, blue, green, and UV versions. Solid-state products offer up to 100,000 hr lifetimes and come in 12 and 24 V versions in T 1-¾ (series LE-0504) and T 3¼ (series LE-0503) sizes. Applications include automotive, gaming, marine, and avionics...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics