Panel Mount LEDs meet RoHS certification standards.
Suited for front and rear mounting, lead-free 3 and 5 mm Panel Mount LEDs install in holes from 0.156-0.312 in. and are available with variety of options including custom lead lengths, high temperature insulation, internal resistors, and connector terminations. Sealed against water and dust, LEDs are suited for demanding outdoor applications. Housings come in blue, green, red, yellow, white, and...
Read More »Infrared Emitters offer up to 200 mW/sr radiant power.
Available in 870 and 940 nm wavelengths, HSDL-42xx Series Emitters are fabricated using aluminum gallium arsenide LED technology and are housed in 5 mm through-hole package. Iron lead frames dissipate power over wide range of currents. Models rated at 870 nm are suited for IR communications, whereas 940 nm units are typically used for remote-control applications.
Read More »LED Light Tubing provides neon-like brightness.
Offering uniformity of color and glow, BrightLine(TM) LED Tubing features oval-shaped flexible plastic sleeve that can be cut and bent or formed on-site to install in channels or on flat surfaces. Cool to touch, low heat LEDs are available in blue, green, orange, red, and yellow with life expectancy of 50,000-100,000 hr, depending on color. Available in 150 and 90 ft rolls, tubing runs off of 110...
Read More »LED Light Strips offer continuous-run single or RGB color.
Provided with SMT, dome, or flat-lens PLCC LEDs assembled onto PCB strips, ABP Series delivers continuous-run arrays suited for lighting and display applications. Passive devices such as resistors, capacitors, or diodes and additional circuitry can be added directly to assemblies. Two styles are offered in 16- or 32-unit, in-line PCB strip lengths of 17 5/8 in. wide x 7/16 in. thick PCB and 3/8...
Read More »Advantages of Using Robotics in Manufacturing to Attract and Retain Skilled Workers
This white paper provides an overview into the advantages of using robotics in manufacturing to attract and retain skilled workers.
Read More »LED Indicators offer range of colors.
Available in red, green, yellow, blue, and white, Q-Series features solder lug/quick-connect terminals, wire terminations, and 200 mm elongated wires. Units are offered in 6, 8, and 14 mm sizes with prominent, recessed, or flush bezel styles. Viewing angle ranges from 70-100Ã-
Read More »Red LEDs are suited for portable equipment and signs.
Exhibiting luminous intensities of up to 16,800 mcd, AHR series 632 nm Red LEDs are available in surface mount, P4, 5 mm round, and elliptical package styles with choice of 15Ã-º, 30Ã-º, 40Ã-º, 60Ã-º x 35Ã-º, 70Ã-º, 90Ã-º, 110Ã-º x 50Ã-º, and 120Ã-º viewing angles. High-intensity, solid-state devices utilize AlGaInP die technology and are suited for sign,...
Read More »IR E-Power LEDs come in 350 and 700 mA packages.
Infrared versions of EP2 and EP4 series enhanced-power LEDs operate at currents of 350 and 700 mA, respectively, with power dissipation of 0.5 and 1.5 W. With forward voltage range from 1.4-2.5 V and radiant intensity from 70-800 mW/sr, products are optimized to operate at wavelengths of 850, 880, and 940 nm. EP2 packages offer viewing angles of 10Ã-
Read More »SMT LEDs have leadframe design that lessens stress.
Offered in white (71.5 mcd), bright blue (18 mcd), and all industry-standard LED colors, BL-SDX Series features hi-temperature Epoxy Resin housing with integrally encapsulated, cast solder pads that use CuAlloy with NiPdAu plating. Housing also forms lens as integral element, reducing effects of mechanical and thermal stresses. Capable of power dissipation of 72 mW at room temperature,...
Read More »Surface Mount LEDs offer brightness levels to 25,000 mcd.
Surface mount technology LEDs in SML-LX1110xx-TR series are offered in red, yellow, green, and blue colors with typ brightness levels from 2,500-25,000 mcd at If = 350 mA. Internal reflective cavities maximize light output, and polarity mark facilitates identification and proper placement. Offered in RoHS-compliant, 0.394 x 0.394 in. PLCC-4 package, all colors are available with viewing angles...
Read More »Power LEDs come in wide or narrow angle styles.
Available in 1, 2.5, or 5 W versions, Power LEDs come in red, amber, green, blue, cyan, warm white, cool white, and RGB. Units are offered as discrete emitters or can be packaged on metal clad PCBs, depending on user's needs. Power LEDs are suited for architectural, entertainment, gaming, transportation, and appliance applications.
Read More »Precision Fabricating with Over 40 Years of Experience
Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.
Read More »