Scissor Lift has repeatable positioning at various speeds.
Lifts

Scissor Lift has repeatable positioning at various speeds.

Skillet Scissor Lift can be programmed for various speeds and precise positioning for smooth operation throughout its entire length of travel. Ball screw driven scissor lift offers accurate and repeatable positioning and is suited for lifting material with high duty cycles. Constant speed scissor lift is rated for capacities from 1,000 to 8,000 lbs with programmable duty cycles. Lift also has...

Read More »
Lift Table uses air bag to raise four tons.
Lift Tables

Lift Table uses air bag to raise four tons.

AX series pneumatic powered scissors lift table is available with 1,000 to 8,000 lb capacity, and can raise table from low height of 8 in. up to 32 in. Air bag delivers same speed and control as other power sources. Work area has no leaking oil, and air bag resists punctures and damage from chemicals. Bag requires 80 psi air at 15 cfm. Standard pedestal mounted or optional foot or hand control...

Read More »
Riser transforms single-level room into tiered auditorium.
Lifts

Riser transforms single-level room into tiered auditorium.

Model LTSA70-75X multi-lift riser system, comprised of 5 electro-mechanical lift units, offers zero creep and dynamic capcity of 15,000 lbs. Completed travel of lifts is 14, 28, 42, 56, and 70 in. on lifts 1 through 5 respectively. Riser is 56 in. long by 659 in. wide, and is controlled by single PLC unit.

Read More »
Lift System eliminates handling of carts.
Lifts

Lift System eliminates handling of carts.

Cart Lift System integrates into FlexiMate(TM) manufacturing cells. It automatically keeps carts moving through assembly process. Activated by proximity switch, rodless pneumatic cylinder raises and lowers carts to or from return track at beginning and end of assembly cell. Cart lift system is encapsulated, eliminating possible contact with moving parts. It operates on 80 psi air supply and 120...

Read More »
Lifts/Upenders offer capacities from 2,000 to 10,000 lbs.
Manlifts

Lifts/Upenders offer capacities from 2,000 to 10,000 lbs.

Units combine double long lift table and upender, and are used to raise and upend loads in manufacturing, processing, and assembly operations. Vertical travel is 36 in. and tilt is 0 to 90 deg. Lift platforms are 10 ft long and upender platforms range between 48 in. wide x 57 in. long to 60 in. wide x 72 in. long. Standard external power unit operates lift and tilt through joystick control.

Read More »
Lifts

Material Lift handles loads up to 500 lbs.

Genie Lift(TM) is manually operated and available in 3 base models. Lift capacity is 13 ft 9Â-½ in. Compact design of standard model allows lift and maneuverability in congested work areas. Straddle base model, with adjustable base legs, straddles load or fixed objects up to 36 in. wide. Short 9 in. front legs of counterweight base model let user get close to load to access countertops or...

Read More »
Mezzanine Lifts offer control panel with alerts.
Miscellaneous Lifts

Mezzanine Lifts offer control panel with alerts.

Intelitroll 2100 panel, for company's line of Mezzanine Lifts (Vertical Reciprocating Conveyors), alerts personnel to possible errors. Control panel blinks predetermined number of times to identify problem areas, giving personnel advantage of knowing exactly where problem is. Fault codes indicate conditions such as if gate is open, E-Stop button has been depressed, or if service is required....

Read More »
Dock Lift can be run over by trailers.
Dock Lifts

Dock Lift can be run over by trailers.

Model T2000 Series is available in 10 models with lift capacities from 5,000 to 6,000 lb, platform sizes from 6 x 8 to 8 x 10 ft, and 58 in. travel. All have safety tread steel deck, removable handrails, 12 x 72 in. hinged throwover bridge, and self contained 5 hp power unit that raises lift at 10 to 12 fpm. Scissors legs are constructed from 58,000 psi structural mechanical steel tube. Lift has...

Read More »
Scissor Lifts handle rough terrain.
Lifts

Scissor Lifts handle rough terrain.

Model 3394RT has 33-ft. platform height and 2,250-lb platform capacity. Model 4394RT has 43-ft. platform height and 1,500-lb platform capacity. Both have load management system that prevents engine from bogging down in rough terrain conditions, dual pump hydraulic drive, and 3-speed selectable drive controls. Standard oscillating axle helps maintain traction and 15-in. wide tires increase...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers