Material Handling Equipment

Fork Truck Attachment transports rolls to machinery.

Tip Lift fork truck attachment is suited for operations where rolls need to be transported to machinery where no overhead crane system is available. With 900 lb capacity, product is dependent on face width of roll to be handled. Unit is equipped with 12 V air compressor for operating pneumatic tooth release mechanism and probes of various sizes that accommodate different core sizes. Controls are...

Read More »
Portable Material Lift offers 24 ft working height.
Lifts

Portable Material Lift offers 24 ft working height.

Superlift Contractor(TM) includes fixed steel base and safely lifts up to 650 lb with 6 different load handing attachments available. Loads are lifted by aircraft-quality cable controlled by heavy-duty winch. One-speed or optional 2-speed winch incorporates silent ratchet system. Non-marking Performa(TM) casters prevent marking floors or picking up debris that could otherwise damage floor. Four...

Read More »
Lifts

Scissor Lift is self propelled.

PartsCaddy Work Positioner 1000 (PWP 1000) eliminates strains, pains, and injuries to employees arising from lifting objects or working on projects not properly positioned for optimum working height. Capable of horizontal/vertical positioning, PWP2000 maneuvers and handles loads up to 1000 lb and offers variable speed twist grips that allow operator to travel forwards and backwards at speeds of...

Read More »
Micro-Scissor Lift has 25 ft working height.
Industrial Platforms

Micro-Scissor Lift has 25 ft working height.

Able to reduce its overall length to 68.75 in., UpRight MX19 is controlled by one-hand, fully proportional joystick. Product incorporates compact charger that works with U.S., European, and local voltages. With gradeability of 29%, unit offers durable ladder and side fork lift pockets. Additional characteristics include 79.25 in. stowed height, 19 ft max drive height, 30 in. width, and 6 in....

Read More »
Pneumatic Leveler automatically adjusts pallet height.
Lifts

Pneumatic Leveler automatically adjusts pallet height.

P3(TM) Pneumatic Leveler, with reinforced rubber airbag and permanent spring, automatically adjusts height of pallets as boxes are added or removed. Unit supports pallet load weights from 400-4,500 lb and can be used where shop air is available. Turntable with anti-friction bearings allows loads to be rotated and fork pockets allow unit to be relocated by fork truck or stacker.

Read More »
Scissor Lift maintains full dual-wheel drive at all times.
Lifts

Scissor Lift maintains full dual-wheel drive at all times.

Measuring 32.5 in. wide, Model X26 Ultra-N moves along aisles as narrow as 3 ft. With driveable maximum work height of 32 ft, product utilizes powered wheel motors with integral multi-disc brakes and traction control system. Capable of handling grades to 26%, unit has 8 in. inside turning radius and 500 lb platform capacity. Additional offerings include retracting guardrails, non-marking tires,...

Read More »
Lifts

Scissor Lift accesses hard-to-reach spots.

Electric, self-propelled model GS(TM)-2632 rolls through single access doors with 26 ft platform height and platform width of 31 in. Able to fit into tight, narrow areas, unit offers 90° turning radius, non-marking tires, and low noise level.

Read More »
Dock Lifts suit places where pit mounting is not an option.
Dock Lifts

Dock Lifts suit places where pit mounting is not an option.

Designed for use with powered pallet jacks and straddle stackers, 6200 models have 6 in. lowered height, 8,000 lb capacity, and 6 x 10 ft platform. Offered for all types of mobile material handling equipment, 6300 models have 8 in. lowered height, 12,000 lb capacity, and 6 x 12 ft platform. Both surface mount dock lift types have 60 in. raised height, and are equipped with approach ramps, 18 x 66...

Read More »
Rack & Pinion Lifting System suits construction industry.
Lifts

Rack & Pinion Lifting System suits construction industry.

Able to lift general purpose building materials, Max Climber(TM) 2000 offers 5 ft, 95 lb galvanized mast sections. Installed with 4 bolts, unit has basket size of 57 x 52 in. and emergency upper and lower limit devices. Separate emergency overspeed brake protects against free-falling. Fold-down standing platform is provided for installing and anchoring mast. Product converts between material and...

Read More »
Lifts

Scissor Lift incorporates built-in self-diagnostics.

Self-propelled Model GS(TM)-1930 is equipped with disc brakes, variable speed motor, and proportional controls for lift and drive functions. Swing-out battery boxes and power modules allow access to components for service. Safety features include pothole guards, slip-resistant surface on deck platform, and built-in lanyard attachments. Model GS-1930 lifts up to 500 lb to working height of 25 ft,...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers