Level Transmitters

Level Transmitters

Continuous Radar Level Transmitter measures solid media.

Featuring 25 GHz pulse technology and process intelligence that evaluates dynamic echo signals, 2-wire Sitrans LR260 measures up to distance of 98 ft, even in environments with extreme dust and temperatures up to 392°F. Unit can be programmed via IR handheld programmer or remotely using Simatic PDM via Hart or Profibus PA. Graphical local user interface displays echo profiles, while...

Read More »
Level Transmitters

Laser Transmitter detects liquid level and bulk solids.

Designed for non-contact level measurement and positioning, Model LM80 measures position over distances up to 500 ft as well as level at distances up to 100 ft. It can measure any solid surface at any angle with narrow beam, no beam divergence, and no false echoes. Advanced timing system and self-correcting signal processing functions allow device to operate in harsh conditions. Unit can be...

Read More »
Guided Wave Radar Level Transmitters use HART protocol.
Level Transmitters

Guided Wave Radar Level Transmitters use HART protocol.

Suited for use with liquids, slurries, interface, and bulk solids, Sitrans LG200 series is comprised of 15 models that measure materials with dielectric range of 1.4 and higher, temperatures to 800°F, and pressures to 6,250 psig. Each 2-wire, loop-powered HART® level transmitter is available with Intrinsically Safe, Explosion Proof, or Non-Incendive approvals as well as range of...

Read More »
Level Transmitter suits open channel flow measurement.
Level Transmitters

Level Transmitter suits open channel flow measurement.

Mobrey® MSP900FH utilizes remote temperature sensor wired directly into transmitter. Measuring 10 mm dia x 25 mm length, sensor can be located in shady spot between liquid surface and transmitter to ensure that air temperature measurement used in speed of sound calculation is representative and not affected by solar gain. Supplied in waterproof housing sealed to IP68, ultrasonic transmitter...

Read More »
Level Transmitters

Transmitter offers 7 different sonar transducer frequencies.

Reflecting signals as large as 2,500 mV, ORCA Sonar Series Interface level transmitter enables users to select appropriate frequency according to density of interface that is being controlled and monitored. Blanket and Fluff Layer interfaces are monitored within secondary clarifier at respective densities of 4 g/L and 600 mg/L. Unit can also continue to control RAS Blanket density at bottom of...

Read More »
Submersible Level Transmitter provides 0.25% accuracy.
Level Transmitters

Submersible Level Transmitter provides 0.25% accuracy.

Designed to measure height of liquid above its position in tank, sump, or pit, Model SBLTX is UL approved intrinsically safe for wastewater applications that demand rating per local codes and regulations. Unit features snub nose so it can be dropped to bottom of tank, and cable that is vented to atmosphere for barometric pressure compensation. Transmitter is suited for non-fouling applications...

Read More »
Level Transmitters

Laser Level Transmitter features explosionproof ratings.

Capable of measuring distances up to 240 ft, SureShot 140XP is suited for level, distance, and position measurement of dry bulk solids, opaque liquids, and slurries in challenging environments. All-digital, modular smart transmitter is housed in powder-coated aluminum with measurement laser, aiming laser, and integrated graphic display. Laser can be directed through spaces as small as 3 in....

Read More »
Capacitive Level Transmitter suits powder, bulk, or liquids.
Level Transmitters

Capacitive Level Transmitter suits powder, bulk, or liquids.

Using impulse RF admittance measurement, Model CRF2 senses capacitance changes resulting from height of material in tank between probe and tank wall. Unit comes with rigid or flexible probe, depending on application installation need and probe length desired. Featuring push button calibration of zero and span, Model CRF2 is suited for level indication in difficult applications, such as sludge,...

Read More »
Transmitter is suited for wastewater, sludge, and slurries.
Level Transmitters

Transmitter is suited for wastewater, sludge, and slurries.

Featuring 316 SS diaphragm that is non-clogging and damage resistant to floating solids, Model PBLTX is designed to measure height of liquid above its position in tank, sump, or pit. It is UL approved intrinsically safe for wastewater applications that demand this rating per local codes and regulations. Standoff plate enables unit to be dropped to bottom of tank at 0.25% accuracy. Transmitter is...

Read More »
Level Transmitters

Aurora Magnetic Level Indicator/Transmitter

Aurora combines the operating system of a conventional float-based MLI with the leading-edge Eclipse Guided Wave Radar transmitter developed for level measurement applications by Magnetrol. The result is true level-measurement redundancy in a single-chamber design. Using a 3 or 4" chamber to house both the Eclipse coaxial style probe and the float, these devices operate seamlessly to provide...

Read More »

All Topics