Level Switches

Tilt Switch Probes sense presence or absence of material.
Level Switches

Tilt Switch Probes sense presence or absence of material.

Featuring airtight, dust-tight, waterproof design, Series LTS is designed for use where bulk material to be sensed is exposed or open. Units contain SPST, normally closed switch and feature probe activation angle of 25° from vertical. Typical applications include high or low level detection in large hoppers, silos, crushers, or trippers, as well as high level control under stackers, and...

Read More »
Liquid Level Switches are top or side mountable.
Level Switches

Liquid Level Switches are top or side mountable.

Models L-40 N (Noryl) and L-40 VCR (Fortron - for corrosive fluids) submersible switches signal fluid level changes to on/off pump controls, alarms, and microprocessors. Switches feature loose pivot movement arms, 2-ft 22 gauge electrical leads, and 316 stainless steel float pivot pins. Hastelloy C, titanium, and Teflon® pins are also available. Both models are rated at 50 W for 120/240 Vac.

Read More »
Level Switch is designed for use with slurries.
Level Switches

Level Switch is designed for use with slurries.

Used when pollution remediation system requires level switch in particulate-heavy sewage or slurries, L-5 with NEMA 4 cover and L-5SS with stainless steel cover employ one or two stainless steel floats on phosphor bronze shaft to detect difference in specific gravity between oil and water. This 15 A, 120/240 Vac switch signals pump, alarm, or solenoid valve, and dry circuit can be specified for...

Read More »
Level Switches

Transport Service Switches enable IP network transformation.

Featuring 320 Gbps switching and multi-degree reconfigurable add-drop multiplex capability, Model 1850 TSS Rel 2.0 provides transparent photonic networking, multi-degree wavelength routing, SONET MSPP functionality, and Ethernet functionality. Including chassis for Ethernet access demarcation, Model 1850 TSS-3 provides 3 Gbps switching and targets networks for Ethernet business services and...

Read More »
Level Switches

Optical Switch offers external network-to-network interface.

Featuring wideband cross-connect switching and control plane intelligence, Model 1675 LambdaUnite MultiService Switch (MSS) Rel 9.1 can be deployed as ADM, terminal multiplexer, multi-ring hub, and wide- and broadband cross-connect. Multi-service optical switch supports networking needs for small to large office applications in backbone and metro networks. Product offers fully non-blocking...

Read More »
Liquid Level Switch is designed for slurry applications.
Level Switches

Liquid Level Switch is designed for slurry applications.

Available for medium slurries, particulate, and corrosive chemical solutions, adaptable L-30 switches mount horizontally or vertically and can control pumps, alarms, or solenoid valves. Products can be made from Noryl (L-30N) for mildly corrosive slurries and Fortron (L-30CR) for use with more caustic chemicals. Flexible, elastomeric seals prevent particle contamination, and Filter Boot can be...

Read More »
Liquid Level Switches feature foam-filled plastic float.
Level Switches

Liquid Level Switches feature foam-filled plastic float.

Custom manufactured with choice of 1, 2, 4, or 5 in. between high and low set points, Model L-21N is made of Noryl while Model L-21VCR is designed for corrosive liquids. Single switch, pump up/pump down liquid level switches have closed cell, plastic, foam-filled float that alleviates nuisance switching induced by turbulence or wave action. Electrical connection options include special switch...

Read More »
Level Switches

Ethernet Switches come in compact 1U form factor.

Available as 20-port XFP optical solution or in 16 CX4 ports with additional 4-ports of XFP optics, series XG2000 switches offer low port-to-port latency of only 300 nsec while delivering 400 Gbps nonblocking throughput performance. Single chip 10 Gb Ethernet units come with various XFP interfaces such as CX4, SR, and LR. With cut through and store-and-forward routing, switches also feature...

Read More »
Capacitive Level Switch measures powder, bulk, or liquid.
Level Switches

Capacitive Level Switch measures powder, bulk, or liquid.

Insensitive to material buildup, CLS2 employs solid-state sensing technology, which uses impulse RF admittance measurement combined with active guard. Product is designed to auto-calibrate in application and features universal power supply that works from 12-240 Vac/dc. Also offered in weatherproof model, features include failsafe setting, status indicators, and programmable output time delay....

Read More »
Level Switches suit chemical and petrochemical applications.
Level Switches

Level Switches suit chemical and petrochemical applications.

Available in 120 and 240 Vac, 24 Vdc, and loop power configurations, Resonator(TM) Vibrating Liquid Level Switches are designed for high viscosity applications to 20,000 cP. Providing different probe materials, RS80 switch features SS, while multi-option RS85 offers 316 SS, Hastelloy C-276, Hastelloy B, Monel, and Incoloy 600. Products feature 1-step, external calibration process and can handle...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers