Leg Levelers

Leveling Mounts adjust to uneven surfaces.
Leg Levelers

Leveling Mounts adjust to uneven surfaces.

Metric leveling mounts in MVAYNAM and MVAYNFM Series feature rubber foot that swivels 15° to all sides of centerline to adjust to uneven surfaces. Units include jam nut in leveling assembly and antislip isolator pads varying in diameter from 40-80 mm, manufactured from fiberglass-reinforced Polyamide. Mount height ranges from 93-180 mm. Units are suited for use in leveling machine tools and...

Read More »
Leg Levelers

AirLoc PRP Mounts Provide Adjustable Floor Supports for Acoustic Test Cell

Beach Dynamics provides solutions for product noise, audio systems, and industrial noise control. Mark Beach, President of Beach Dynamics, came to AirLoc for adjustable floor supports to provide leveling and vibration / noise isolation for a laboratory grade acoustic test cell he was installing. After some consideration of the features that were needed, Mark decided on a system consisting of (18)...

Read More »
Leg Levelers

AirLoc Wedgmounts® with Damping Pads Put the Skids on John Deere Genset Vibration

Whitestone Power and Communication, a small rural energy provider, recently installed new John Deere prime movers on AirLoc 204.3 VRC Wedgmounts® in conjunction with AirLoc 727 damping pads. Hasz Consulting Co., experts with vibration analysis and testing, worked with Whitestone on the installation. Steve Selvaggio of Hasz says that the purpose of the mounting system was to minimize high...

Read More »
Nylon Base Leveling Mounts swivel 15° and will not separate.
Leg Levelers

Nylon Base Leveling Mounts swivel 15° and will not separate.

Offered in steel and stainless steel, with or without lag holes, tapped-type NY-LEV® nylon base machinery mounts meet leveling and height adjustment needs. They are constructed with tapped socket and swivel 15° in all directions. Due to hex bar stock manufacturing process, hex acts as stop when moving socket beyond its 15° swivel point and ensures socket will not separate from...

Read More »
The Next Wave of Intelligent Design Automation
Sponsored

The Next Wave of Intelligent Design Automation

In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.

Read More »
Leg Levelers

AirLoc PRP Jacmounts® with Damping Pads Help Keep Minster Press in Place!

Seastrom Manufacturing, located in Twin Falls, Idaho, is one of the nation's leading manufacturers of standard and custom electronic and assembly hardware serving industries worldwide since 1928. Craig Grayer, a Seastrom Mfg. Production Engineer, needed a leveling mount to support a Minster B1-32 stamping press (see picture below) operating at up to 800 strokes per minute. Potentially this high...

Read More »
Leg Leveling Foot stabilizes appliances on uneven surfaces.
Leg Levelers

Leg Leveling Foot stabilizes appliances on uneven surfaces.

LLF Series allows manual leveling by turning foot under weight of appliance, with maximum load per foot of 56.2 lb. Part is co-molded with 2 engineered thermoplastic materials: Polypropylene base for durable contact with floor and Thermoplastic Elastomer foot providing vibration control and noise isolation. It also includes RoHS-compliant 18-8/A2 SS hardware which meets/exceeds ASTM, DIN, and...

Read More »
Leg Levelers

AirLoc Bolt-On Wedgmounts® Helps Oak Press Solutions Control High Impact Press!

AirLoc Application News... Oak Press Solutions, headquartered in Sturgis, Michigan, has manufactured reliable, precision, stamping presses since 1965 for worldwide distribution. Recently, Kent Lancaster, Oak technical sales and marketing manager had a leveling mount application for a 200 ton, high speed perforating line press. The application generated high impact snap through forces at 240...

Read More »
AirLoc Positioning Wedgmount® Provides Precise 3-Axis Positioning
Leg Levelers

AirLoc Positioning Wedgmount® Provides Precise 3-Axis Positioning

One of the major US auto manufacturers required a precise, 3-axis, positioning mount for their engine block transfer lines. Wing" machines on the line required precise locating from machine to machine for component assembly. AirLoc already had a very precise vertical leveling Wedgmount design with their model 2120-KSC and needed to find a way to provide precise two axis horizontal positioning as...

Read More »
Adjustable Levelers are designed for automated equipment.
Leg Levelers

Adjustable Levelers are designed for automated equipment.

Type PRS and PRSK Jacmount® levelers meet precise positioning requirements and vibration isolation of fully automated equipment, such as injection molding; grinding and milling; and cutting and piercing machines. Ruggedly designed units feature adjustable load plate that will not come apart during installation or relocation of machinery. Integrated components are interlocking and well...

Read More »
Orion Manufacturing Puts a Used Danly Press on AirLoc 900 Series Pads
Leg Levelers

Orion Manufacturing Puts a Used Danly Press on AirLoc 900 Series Pads

Orion Manufacturing occasionally adds used, rebuilt presses to support their automotive part stamping business. Recently Gerry Stedman, manufacturing engineer, added a Danly S4-800 ton press with rolling bolster to their Ionia Michigan facility. AirLoc 900 series pads were used to provide a stable, but isolated support under the 144 x 72 press frame. Three layers of AirLoc 925 pad cut 32 x 20"...

Read More »

All Topics