Lathes

Lathes do not require programming skills.
Lathes

Lathes do not require programming skills.

The CNC Auto Teach Lathes utilize FAGOR CNC 8055 TC control, which allows user to create particular cycles and integrate them into CNC. Available in 8 models with swings from 13 to 24 in. Lathes with swings of 15 in. and greater have 2 variable speed spindle ranges and system for automatically changing speed ranges. They offer ground and hardened heavy-duty carriage cross slides, bed ways, and X...

Read More »
Lathes

Lathe has digital servo drives and 5.9 hp main spindle.

EMCOTURN 325-II inclined-bed machine features 1 in. bar stock or 3.75 in. chuck capability for machining parts up to 3.35 in. in diameter and 8.85 in. in length. It includes full C-axis with rapid traverse of 100 rpm and 12-station VDI 16 quick-change tool turret that holds up to six 1.6 hp driven tools at speed range of 200 to 5000 rpm for off-center drilling, milling, and thread cutting. ET...

Read More »
CNC Lathe reduces idle time.
Lathes

CNC Lathe reduces idle time.

MT2-200W Twin Spindle CNC Lathe features No Idle Time Function: when turret on first operation is completed, it will support second operation being done on second spindle. Both turrets have 12 tool capacity. Spindles are driven by 2 independent 35 hp AC drive motors and operate at 4,500 rpm. Maximum turning length and diameter are 4.72 and 7.87 in., respectively. Turning system includes part...

Read More »
Variable Speed Lathe suits wood turning applications.
Lathes

Variable Speed Lathe suits wood turning applications.

Model 46-746, 16 in., steel bed, wood lathe features 12 in. tool rest and base and 2 hp (230 V) variable frequency drive motor and controller. Baldor(TM) controller offers three speed ranges: 0-1100, 0-2200, and 0-3200 rpm. Model 46-715, 14 in., cast iron lathe features ¾hp, 15 amp motor. It offers variable speed range between 500 and 2,500 rpm. With 42 in. between centers, unit has...

Read More »
Turning Center fits into small spaces.
Lathes

Turning Center fits into small spaces.

Mini Lathe gang-tool turning center has 5.5 x 4.5 ft footprint, 7.5 hp vector drive spindle, and air-actuated 5C collet. It accepts bar stock up to 1.06 in. Visual Quick Code programming system has graphical interface for creating simple G-code programs. Large capacity coolant pump improves tool life and allows higher cutting speeds. Optional floppy disk drive can upload programs from PC disk,...

Read More »
Vertical Turning Center has flexible tooling system.
Lathes

Vertical Turning Center has flexible tooling system.

VTC Series includes 4 models, with chuck sizes from 1250 to 2500 mm, and swings to 2700 mm. Height under rail ranges from 1500 to 2500 mm. X-axis, heavy-duty, roller-bearing carriages ride on hardened and ground guide ways. Traverse rate is 787 ipm in both X- and Z-axis. Wedgelock tooling system accepts 50- or 60-taper tools and modular tooling. Other features include absolute linear feedback...

Read More »
Rotor/Brake Lathe operates at one spindle speed and feed rate.
Finishing Equipment

Rotor/Brake Lathe operates at one spindle speed and feed rate.

EEBR308A combination rotor and drum brake lathe handles drums or rotors up to 100 lbs using 1 in. arbor. Separate feed motors power twin cutter tool and boring bar independently. Dovetail tool slides with adjustable gibs are protected with felt wipers. Twin cutter tool reconditions both brake rotor surfaces simultaneously and is adjustable with aluminum micrometer dial. Complete packages include...

Read More »
CNC Lathe requires no programming skills.
Lathes

CNC Lathe requires no programming skills.

CNC 1540 Lathe incorporates FAGOR CNC 8055 TC control, which allows users to create particular cycles and integrate them into CNC operation. Eight models are available with swings from 13 to 24 in. Lathes with swings 15 in. and greater have 2 variable speed spindle ranges and systems for automatically changing speed ranges. Heavy-duty carriage cross slides, bed ways, and X and Z axes ballscrews...

Read More »
Turning Center features dual spindles.
Lathes

Turning Center features dual spindles.

TL-25 lathe allows turning of double-ended parts in single setup on one machine. It has 30 hp vector-drive main spindle with 10 in. chuck, and 8 hp sub-spindle with 5 in. chuck. Main spindle provides speeds to 3,400 rpm, and sub-spindle provides speeds to 4,000 rpm. Standard 12-station tool turret holds 6 VDI 40 tools and 6 bolt-on tools. Live tooling and full C-axis are optional.

Read More »
Machining Centers offer various speeds.
Machining Centers

Machining Centers offer various speeds.

DIGMA VMC offers 1.7 g acceleration, 42000 rpm and 1576 ipm travel. Spindles have multi-temperature sensors for spindle length compensation through machining process. Mach CNC 647 is for short and long runs of parts up to 1/4 in. dia. It has 12000 RPM rotating toolhead, 4 independent cutting tools, and backworking capabilities. K'MX Swing 1026 Swiss turning center has 26 mm bar capacity, main and...

Read More »

All Topics