Lathes

Lathes

CNC Lathe includes sub-spindle for increased capacity.

Main spindle of Model JD-3 offers 2 in. diameter bar capacity. Unit's synchronized main and sub-spindles complete both rough and finishing operations, allowing lathe to transfer parts on the fly between spindles. Main and sub-spindle speeds reach 4,000 rpm, with 15 and 5 hp motors. Able to be used in stand-alone situations and integrated into flexible transfer lines, JD-3 incorporates controller...

Read More »
Lathe provides 30 hp spindle and 3-axis turning.
Lathes

Lathe provides 30 hp spindle and 3-axis turning.

Storm II 220M features 6 driven tools, 10 in. chuck capacity, 3 in. plus spindle bore, and C axis with integral disk brake. Duo-stable construction makes use of inert composite encapsulated and reinforced with network of ribs, insulating cutting area from uneven temperature gradients and heat dissipation. Lathe includes lights-out capability, delivering 24-hour, unmanned operation, and GE Fanuc B...

Read More »
Lathe handles long parts.
Lathes

Lathe handles long parts.

Model SL-40L Long-Bed Lathe provides max cutting length of 80 in. and max cutting diameter of 25.5 in. It features 15 in. chuck and A2-8 spindle nose that provides bar capacity of 4.0 in. A 40 hp (peak) vector dual-drive system combines with high-torque gearbox to yield 1,400 lb-ft of spindle torque and provides speeds to 2,400 rpm. For large-diameter tubing, Big Bore version is available...

Read More »
Lathes

CNC Gang-Type Lathe offers sub-micron accuracy.

Model G05UP holds 1 micron in cylindricity, roundness, and positioning. Built with precision-type integral motor, unit also incorporates built-in active thermal feedback monitoring system and isolated automation package. Equipped with floor type loader, G05UP offers .00001 in. X and Z offset capability. Spindle speeds reach 12,000 rpm, travel for X- and Z-axes is 8.66 in, and traverse rate is 600...

Read More »
Turning Center offers live tooling and multitask machining.
Lathes

Turning Center offers live tooling and multitask machining.

Hawk® TC-200M 8 in. CNC Turning Center combines digital vector servo-axis drives, digital Heidenhain X-axis linear scales, and live rotary tooling for round parts processing at ±0.0004 in. repeatability. Servo-driven 12 station VDI turret provides bi-directional indexing with 0.3 sec chip-to-chip times. Through-hole capacity allows processing of 2.5 in. dia bar stock. Max swing is...

Read More »
Turning Center features 45° slant bed.
Lathes

Turning Center features 45° slant bed.

Digital-featured Hawk® TC-300 Turning Center offers large thru-hole bar stock capacity of 3.5 in., max turning swing of 26.8 in., turning dia of 16.6 in. and turning length of 39.9 in. Hydraulically actuated 12 in. chuck is powered by single-range, gearless spindle drive. Standard 3000 rpm spindle drive motor delivers full 60 MTDR hp. Digital scale feedback, standard on X-axis, delivers...

Read More »
Lathes

Turning Center utilizes digital control and drive technology.

Hawk® TC-200CX is equipped with Siemens A2100Di digital controls, drives, and motors that include Profibus interface for I/O communications. It maintains positioning accuracy of ±3 microns in X-axis and ±4 microns in Z-axis. Reliability accuracy of ±1 micron is achievable in both axes. Universal 12-station turret disk is standard, allowing for any combination of OD and ID...

Read More »
Lathes

Gang-Type Lathe provides 8000 rpm operation.

Model G05 CNC lathe features Fanuc AC servo with vertical and horizontal rapid traverse rates of 3,200 and 4,356 ipm, respectively. Loading/unloading time is 4 s. Lathe is equally effective in stand-alone situations and when integrated into transfer lines. Heavy cast iron beds with hardened and ground box ways and double sets of angular contact bearings ensure precision. Controller includes...

Read More »
Milling Machines

Multifunction Machine Tools perform milling and turning.

EMCOTURN 420MC has 2 main spindles, 2 counter spindles, and 2 tool turrets. It handles simultaneous machining of two parts without interruption or collisions. Digital drives produce performance in both main spindle and X and Z axes. HYPERTURN 665MC combines 4 axis turning capability with Y and B axes, adjustable milling spindle, cross-roller linear guides, and easily accessible tool turrets. It...

Read More »
Smart Lathe features 15 in. swing.
Lathes

Smart Lathe features 15 in. swing.

Model 1560 VS includes touch screen electronic controls complete with electronic stops, taper adjustment, and high speed threader. Variable Constant Surface Speed spindle has three speed ranges. Lathe is supplied with complete guarding and chip collection tray, coolant equipment, and automatic lubrication of bed ways. Manual operation is made easy with electronic hand wheels for X and Z axes, and...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics