New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Lathes

Turning Center enables 1-pass turning/machining/finishing.

Turning Center enables 1-pass turning/machining/finishing.

Multitasking Super NTY-³ features 3 turrets, each with Y-axis, all in 109.45 x 77.6 in. footprint. Three 6,000 rpm milling motors can simultaneously machine 2 flat surfaces on one spindle and 1 surface on other. Each turret holds 12 driven or 24 stationary tools, for max of 72 tool stations. Super NTY-³ has max turning diameter of 6.89 in., max turning length of 23.5 in., and bar capacity of...

Read More »

Rubber Cutters minimize knife changeover times.

Designed to cut rubber with lengths up to 48 in. and diameters up to 12 in., Lathe Cutters feature quick changeover system that cuts knife changeover times down to 10 sec. Knife holder slips over top of carriage and is secured with quick release or disconnect handle. All machines come with spare knife holder that safely holds knife during blade changeover, and device that ensures desired...

Read More »

Swiss Turning Center produces moderately complex parts.

Swiss-style, 6-axis DECO 20s is mirror image machine with near equal number of tools for both 5.5 hp, 10,000 rpm direct-drive main and counter spindles. Featuring total of 22 tool positions, machine supports quick-mount powered or live tooling that can perform milling and drilling operations in addition to turning. Unit supports 220 mm max part length and 20 mm part diameters and features Fanuc...

Read More »
Turning Center combines front and back machining.

Turning Center combines front and back machining.

Rated for 3,000 rpm operation, twin-spindle Model ANW-4100 is equipped with 12-position turret and FUJI MAX SP1 Controller, which automatically calculates fluid robotic motion. Four-axis, rack-and-pinion swing arm robot enables multi-axis movement to access front, back, left, and right of traverse axis.

Read More »
CNC Lathe provides 26.97 in. swing.

CNC Lathe provides 26.97 in. swing.

Designed with rigid cast iron H bed and 114.6 x 74.8 in. footprint, Model M27 features rapid traverse rates of 394 and 295 ipm in X and Z axes, respectively. Belt-driven, cartridge-style gearless headstock is equipped with 30 hp AC GE Fanuc spindle motor with variable speed drive. Spindle is supported by angular contact ball bearings at nose and double-row of cylindrical roller bearings at rear....

Read More »

Lathe offers complete part machining in single setup.

Measuring 87 x 52 in., Gang Tool Lathe, Model BX-26S features 3D linear turret and traverse-type identical left and right spindles, both with 5 hp, to ensure stable cutting from end to end. High-speed turning of 8,000 rpm max is possible with built-in spindle motors and high-rigidity linear guides. Operation is facilitated by Y-axis and C-axis on either spindles, with 8 revolving tools, allowing...

Read More »
Hard Turning Lathe provides highly automated solution.

Hard Turning Lathe provides highly automated solution.

Modular ANS-3100P offers built-in automation with 4-axis rack and pinion swing arm robot and SP1 Max Controller that provides simultaneous multi-axis movement to access front, back, left, and right of traverse axis. Equipped with Fanuc Control with 5-place decimal control, machine utilizes precision ball screws and vertical bed that aids in evacuation of chips. It operates at 3,500 rpm max, has...

Read More »
CNC Lathe combines turning and machining.

CNC Lathe combines turning and machining.

With 124.02 x 64.96 in. footprint and 20 in. swing, Model M 20 offers rapid traverse rates of 394 ipm on X-axis and 295 ipm on Z-axis. Belt-driven, cartridge-style, gearless headstock has 15 hp AC GE Fanuc P-type spindle motor with variable speed drive, permitting full horsepower at spindle speeds as low as 275 rpm. Featuring 10.4 in. color LCD, GE Fanuc 21i-T control offers machining cycles for...

Read More »
Machining Center offers multi-tasking operation.

Machining Center offers multi-tasking operation.

Integrex 100-IIIST features 6,000 rpm max turning spindle speed with 6 in. chuck and milling spindle with 12,000 rpm max speed. Second spindle eliminates work-in-process; parts are completed in one setup on one machine. Linear guides are provided on X, Y, and Z axes, with rapid traverse speeds of 1,181, 1,024, and 1,299 ipm, respectively. Machine includes automatic tool changer with 20-tool...

Read More »
Gang Tool Lathe is suited for small parts turning.

Gang Tool Lathe is suited for small parts turning.

Prodigy GT-27 Gang Tool Lathe features C-axis spindle as standard, which allows for indexing and positioning as well as interpolation and polar coordinate milling. Featuring 3 axes of motion commanded in absolute or incremental modes, machine has GE Fanuc Controller and polymer composite base that reduces vibration and is resistant to oxidants and thermal distortion. Unit can index in .01-

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics