Lathes

Tong-Tai (Topper) displays TVL8DC - Vertical Turret Lathe at IMTS-06

VALLEY COTTAGE, NEW YORK (April 7, 2006): Tong-Tai (Topper) will display a TVL8DC, Vertical Turret lathe from its complete line of Vertical Turret lathes. Tong-tai can provide Vertical Turret lathes from 10 chuck all the way to 60 tables with turrets, rotating tools and Automatic Tool Changers (ATC) TVL8DC is a 24 Chuck, 30HP VTL with a swing of 41.3 (1050mm) and a 12 tool ATC. The machine has a...

Read More »
Lathe Goes Live at IMTS 2006

Lathe Goes Live at IMTS 2006

Hurco launch of lathe with live tooling piques customer interest INDIANAPOLIS-The popularity of the CNC slant-bed lathes that Hurco introduced at IMTS 2004 prompted development of the Hurco Lathes with Live Tooling, which were introduced at this year's IMTS. The TMM8, Hurco's integrated mill turn machine with an 8 three-jaw chuck and spindle speed of 4,800 rpm, was displayed at the Hurco IMTS...

Read More »
Toolmex Machinery Introduces TUR1350 MN/CNC Heavy-Duty Lathes

Toolmex Machinery Introduces TUR1350 MN/CNC Heavy-Duty Lathes

February 14, 2006 The new TUR1350MN heavy-duty CNC lathes were designed to accommodate the needs of today's leading companies that require superior quality, maximum flexibility and state-of-the-art CNC with load capacities up to 33,000 lbs. The TUR series is a premium quality European built lathe that was designed with the US market in mind. Our TUR MN/CNC models offers 45 ,53 or 61 swing x 78...

Read More »

Steady Rest for Lathes and Turning Centers

Arobotech Systems' 4th generation turning AUTO REST® offers the latest in steady rest technology. In addition to our patented sliding wedge design these models feature internal metering cartridges for optimal oil lubrication, hydraulic cylinder with integrated check valve and a unique method of protecting the contact rollers. All of this combines to make the Arobotech Systems Turning AUTO REST®...

Read More »
Turning Center features twin-spindle design.

Turning Center features twin-spindle design.

Designed to machine parts with up to 9.8 in. dia, DVH250i duo vertical pick-up turning center includes shuttle-type part feeder and enables parallel production of 2 identical or different parts simultaneously at rates up to 200 parts/hr. Machine has work envelope of 11.8 x 7.9 in. and requires 64.6 sq ft floor space, with axis traverse rates of 1,772 ipm in X direction and 1,181 ipm in Z...

Read More »
Two-Turret Lathe machines shafts.

Two-Turret Lathe machines shafts.

Measuring 5 ft high with compact footprint, Model NZ-S1500 employs symmetrical design in which 2 turrets are aligned with spindle, which is mounted on vertical bed. Layout minimizes influence of heat, holding thermal displacement to under ±10 mm. Chips fall directly into chip pan, avoiding accumulation, while vertical protector prevents chips from reaching linear guide or ball screws. Model...

Read More »
Twin-Turret Turning Center has programmable tailstock.

Twin-Turret Turning Center has programmable tailstock.

PUMA TL-series features upper and lower turrets and programmable tailstock for parts 9.4 in. dia x 23.6 in. long. While model TL2000 accepts 2.6 in. dia barstock, TL2500 accepts barstock of similar or 3.0 in. dia and 39.3 in. lengths. Both models are designed for interrupted cutting. Their dual turrets house 20 tools total, with live tooling at any station, and servo drives reduce...

Read More »
Turning Center has tool setter with4-position touch sensor.

Turning Center has tool setter with4-position touch sensor.

Offered in 3 models with 6.5 or 8.25 in. chuck, Lynx 220 OD Turning Center is powered by 20 hp motor and features 30° slant bed with single-piece, strategically ribbed design and fine-grain Meehanite composition that dampens vibration and helps dissipate heat. Spindle accelerates to 6,000 rpm in 2.3 sec, and rapid traverses for X and Z axes are 1,181 and 1,417, respectively. Heavy-duty,...

Read More »
Tong-Tai (Topper) Introduces TA20 - Quick Setup Turning Center at IMTS-06

Tong-Tai (Topper) Introduces TA20 - Quick Setup Turning Center at IMTS-06

VALLEY COTTAGE, NEW YORK (May 15, 2006): In this day and age of JIT manufacturing, the norm is short run manufacturing rather than large quantity batch manufacturing. It is desirable to run 4 to 5 different setups a day, rather than a large quantity run with 1 setup. This allows meeting the requirements of JIT namely pull rather than push, minimum inventory on the shelf and manufacture to need...

Read More »

Sharp CNC Displays the Remarkable ST-20 CNC Lathe at IMTS 2006

Torrance, CA - Sharp CNC will display their amazing CNC Turning Center ST-20 at the IMTS show in Booth A-8474. Sharp CNC ST-20 has a swing capacity of 22.8 and maximum turning length of 18.1 . The reliable Fanuc control makes the ST-20 easy to operate. With special Sharp CNC features like word-processor editing, one-button features, multi-function jog handle, and Manual Guide Programming, you'll...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics