Lathes

Mill-Turning Center may be equipped with 2, 3, or 4 turrets.

Featuring identical 37.5/32.2 hp main and counterspindles, Traub TNX65/42 Mill-Turning Center machines complex parts from bar diameters up to 2.60 in. and lengths up to 11.8 in. In addition to holding 10 live or fixed tools, each turret can travel 6.9 in. in X direction, 25.6 in. in Z direction, and optionally 1.57 in. in Y direction. Traub TNX65/42 can perform 2 dissimilar machining operations...

Read More »

CNC Lathe provides small parts turning.

Taking up 6.5 x 4.5 ft of floor space, Model SL-10 provides 11 in. turning diameter, 14 in. turning length, and 16.25 in. swing over front apron. Machine comes standard with 6.5 in. hydraulic chuck and 12-position bolt-on tool turret. Rated at 15 hp peak, vector dual-drive spindle provides speeds to 6,000 rpm, while A2-5 spindle hose accepts bar stock up to 1.75 in. Tool presetter, parts catcher,...

Read More »

CNC Lathe includes high-speed, automated gantry loader.

Featuring 4-spindle design, Kitako HS4200i offers max spindle speed of 4,500 rpm, x-axis gantry loading feed rates of 6,700 ipm, carrier indexing time of 1.5 sec, and 0.3 sec turret indexing/station. Parts are transitioned in and out of machining zone in as little as .8 sec each. Mounted in horizontal, square pattern in large carrier drum, spindles are partnered as pairs so as carrier is indexed...

Read More »
Lathe provides max capacity of 10 x 8 in.

Lathe provides max capacity of 10 x 8 in.

Taking up 5 x 5.3 ft of floor space, Model GT-10 provides max part swing of 16.25 in. over front apron, with 12.75 in. swing over cross slide. Machine's X-axis provides 6 in. of travel with 2,400 lb of thrust, while Z-axis offers 8 in. of travel with 3,700 lb of thrust. In base configuration, GT-10 has max spindle speed of 3,000 rpm and does not include chuck, hydraulic system, or tool turret....

Read More »

Hurco WESTEC Booth to Feature Machines with New WinMax® Control Software

INDIANAPOLIS-Hurco Companies, Inc., will demonstrate the power of its new WinMax Control software at the WESTEC 2007 Exposition and Conference in Los Angeles, Calif., from March 27 to March 30, at the Hurco booth (#2500). WinMax will be the standard control software on all Hurco CNC mills and lathes later this year. WinMax provides the highest level of shop floor flexibility and software...

Read More »

Gang Tool Lathe features C-axis spindle as standard.

Intended for small parts turning, Prodigy GT-27 provides spindle speeds to 6,000 rpm and uses 3 axes of motion that can be commanded in absolute or incremental modes. C-axis spindle allows for indexing and positioning as well as interpolation and polar coordinate milling. Polymer composite base minimizes vibration and is resistant to oxidation and thermal distortion. With max production bar work...

Read More »
Multi-Tasking Turning Centers utilize 3-jaw chuck.

Multi-Tasking Turning Centers utilize 3-jaw chuck.

Designed to machine complex small to medium sized parts in single setup, SR-Series offers true chuck and bar machines that handle deep interrupted cuts while maintaining accuracy. Machines provide vibration damping through use of heavy-duty linear roller guides mounted to HARCRETE-reinforced cast iron base. Equipped with Fanuc i-Series SR control with high-speed milling capability and multi-axis...

Read More »

Automated Lathe Press suits high-mix/-volume production.

Capable of turning, drilling, and milling, TNW-3500R employs twin spindles, gantry robot, and slant bed. Live tool turret performs secondary operations, and live tool motor power is 3/5 hp. Controlled via Fanuc 310i-A CNC, press also features gantry loader with 22 lb capacity and dual 10-tool turrets. System's A2-6 spindle turns with 15/20 hp motor and operates at 4,200 rpm max. It also includes...

Read More »
New ROMI E280 Offers Even Greater Multitasking Flexibility

New ROMI E280 Offers Even Greater Multitasking Flexibility

ERLANGER, KY - Romi Machine Tools, Ltd, an industry leader in chip-making technology, has built a reputation on providing customer-driven solutions to a broad array of precision machined part challenges. The New Generation E Series of turning centers offers turning, boring, milling and tapping - all in one setup. It can be configured with one or two spindles with full C axis, live tools and a...

Read More »

Turning Machines do not require reference point guiding.

Models CTX 310/410 are equipped with counter spindle expansion stage for 2-sided complete machining and Y-axis expansion stage for eccentric drilling and milling machining. Fast-indexing VDI servo turret (from 0.1 sec), also included, features 12 tool stations and optional driven tools. Both machines have 45° slanted bed that can be converted to warp-resistant, 4-lane bed with linear roller...

Read More »

All Topics