New Lathes Products

Slant-Bed Lathes handle extra-large workpieces.

Designed to handle parts up to 39 in. dia x 295 in. long with up to 19,800 lb between centers, Model FTM1000 maintains 39 in. swing over bed and cross slide. Spindle bore sizes are available in 5.5, 8.6, or 12.5 in. Suitable for parts up to 27 x 177 in. with up to 8,500 lb between centers, Model FTM700 maintains 27 in. diameter swing over bed and cross slide and is available with 5.5 or 8.6 in....

Turning Centers accept up to 39 tools with up to 15 live.

Available with or without guide bush, single-spindle Gamma Turning Centers offer 1-2 tool systems and can handle parts up to 20 mm in diameter. Gamma 20/6 provides 6 linear axes, while Gamma 20/5 offers 5 linear axes. Ergonomic design provides access to all tool positions, while automatic lubrication unit, swarf tray, and removable oil pan facilitate maintenance.

CNC Long Bed Lathes have 17 in. wide TRI-V bed design.

Optimizing access to work pieces during setup and measurement, TUR630MN and TUR710MN series Manual Plus CNC long bed lathes are available as 25 or 28 in. swing over bed with 78, 118, or 157 in. between centers. Machines include independent overhead swivel control station to avoid cable damage, while absolute encoders on feed motors for z- and x-axis eliminate need for homing. Also incorporated...

Turning Center targets oil-field applications.

Providing 25.6 x 39 in. work envelope, Puma 480D features 10.8 in. through-hole diameter, 60 hp turning power, 3,293 lb-ft torque, and up to 6,102 lb Z-axis thrust. Wrap-around guideways are induction hardened, precision ground, and bonded with low-friction fluroplastic coating to minimize wear and dampen vibration. Power is supplied by 2-speed gearbox, generating spindle speeds up to 1,000 rpm....

Adhesive Tapes for Energy & Utility Applications

Read about the various types of tapes used in energy and utility applications.

CNC Lathe provides 17,600 lb part capacity.

Intended for oil and gas industry work, Big Bore VDF 800 DUS features 14 in. spindle diameter, 32 in. swing over bed, and 4,500 lb Z-axis cutting force. Main drive is rated at 50 hp continuous, 74 hp max with 7,200 Nm max torque. Top speed of 900 rpm enables machine to handle range of small diameter parts as well. Built on box-type Meehanite cast iron bed measuring 22 in. wide, lathe offers...

GANESH Shows High-Performance CNC Turning at IMTS!

Manufacturers looking for affordable cost reduction for their multi-operation CNC lathe work need look no further than the machines offered at IMTS in Chicago this September by Ganesh Machinery at Booth S-9371. Ganesh will be showing the venerable 7-axis Cyclone-32 CS 1-1/4 Swiss-style CNC lathe featuring 28-tools with up to 11-driven tools for complete done-in-one part processing of complex...

Turning Center features max cutting capacity of 533 x 660 mm.

Featuring rigid, thermally stable design, Model ST-30 provides max swings of 806 mm over front apron and 527 mm over cross slide. Spindle bore is 89 mm, with bar capacity of 76 mm. Operating at speeds to 3,400 rpm, 22.4 kW dual-drive spindle provides 373 Nm torque. For heavy-duty cutting, optional 2-speed gearbox is available that boosts torque to 1,139 Nm. Additional features include 254 mm...

Dual-Spindle Turning Center features rigid, structurally stable bed. .

Puma 2600SY has structurally stable bed that absorbs low-frequency/high-amplitude forces of rapid acceleration/deceleration and vibration associated with heavy cuts. System has 24-position turret with 7.5 hp motor that turns live tooling at up to 5,000 rpm. Designed for parts with up to 14.8 in. dia and 29.9 in. long, unit also includes 35 hp spindle motor that generates speeds up to 4,000 rpm,...

Twin Spindle Lathe handles heavy parts up to 200 dia x 100 mm.

Equipped with dual 100 mm diameter spindles powered by 15/20 hp spindle motors, Model CSD-300 provides accurate turning of various heavy parts. System features hydraulic clamping loader, 8-10 in. capacity workholding chucks, hardened box way slide, and 2,260 mm wide machine base. Turret delivers speeds of 0.26 sec/index, while 3-axis gantry robot control achieves robot alignment to spindle center...

Vertical Lathe delivers micrometer precision.

With gearless spindle technology and RS-Slide structure, VTP-1000 performs hard turning with precision that eliminates need for grinding. Contour and profile cutting accuracies are within -

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.