Lathes

TNL20 Sliding/Fixed Headstock Lathe features Xpanel i 4.0 control panel.
Machinery & Machining Tools

TNL20 Sliding/Fixed Headstock Lathe features Xpanel i 4.0 control panel.

TNL20 Sliding/Fixed Headstock Automatic Lathe is offered in TNL20-9 and TNL20-11 versions. TNL20-9 consists of nine linear axes, two turrets (max. 12,000 rpm), back working attachment and an autonomous counter spindle whereas TNL20-11 features extra front working attachment (max. 12,500 rpm). Unit comes with a vertical pallet storage device with 28 slots and an articulated arm. Product’s work...

Read More »
SL-II 9000 Series CNC Lathes feature six rows of bearing.
Machinery & Machining Tools

SL-II 9000 Series CNC Lathes feature six rows of bearing.

SL-II 9000 Series CNC Lathes are available in SL6-II, SL8-II and the SL10-II models. Units are embedded with standard G & M codes and come with roller guideways. Products are equipped with ballscrew, Yaskawa Sigma V servo motors and drives and two rows of ABEC Class 7 P4 preloaded angular contact bearings. CNC Lathes feature Renishaw pre-setters, optional programmable quill tailstocks, parts...

Read More »
Visit EMAG at Gear Expo 2017 in Booth 1107!
Machinery & Machining Tools

Visit EMAG at Gear Expo 2017 in Booth 1107!

At Gear Expo 2017, October 24-26 at Greater Columbus Convention Center in Columbus, OH EMAG USA will feature manufacturing systems for precision metal components with a special focus on its efficient and diverse solutions for gear manufacturing. The modular VL Series for chucked components will be on display, with our VL 4 machine, for visitors to experience the successful EMAG modular inverted...

Read More »
Managing the New FGD Wastewater Regulations
Sponsored

Managing the New FGD Wastewater Regulations

EPA Steam Electric Power Generating Effluent Limitations Guidelines, or ELG’s, impact coal-fired power plant operations and their wastewater management. Specifically, the ELG’s impose limits for suspended solids, arsenic, mercury, selenium, and nitrate/nitrite for Flue Gas Desulfurization (FGD) wastewater. These regulations drive the need for technology based solutions that address and adapt to variables such as the nature of wastewater streams, types of contaminants, contaminant loading, and costs. In this guide you will learn about the best available technologies for complying with the new standards. One of the leading contenders in this process is the Fluidized Bed Reactor or FBR, which removes soluble selenium and other metals from FGD wastewater. Advantages of fluidized bed reactors include optimum microorganism efficiency, smaller overall footprint, steady-state operation, lower hydraulic residence times, system robustness, and lower costs. Download this guide for additional information on FBR technology for treating FGD wastewater, including pilot studies and tests, and polishing selenium removal options.

Read More »
Visit EMAG at South-Tec 2017 in Booth 1629!
Machinery & Machining Tools

Visit EMAG at South-Tec 2017 in Booth 1629!

At South-Tec 2017, October 24-26 at the TD Exposition Center in Greenville, SC, EMAG will feature manufacturing systems for precision metal components with the VL 2 modular vertical turning machine for the low-cost production of chucked components with a diameter of up to 100 mm. This machine from the VL series will be on display for visitors to experience the successful EMAG modular inverted...

Read More »
Visit EMAG at Westec 2017 Booth 2025!
Machinery & Machining Tools

Visit EMAG at Westec 2017 Booth 2025!

At Westec 2017, September 12-14 at the Los Angeles Convention Center, EMAG will feature manufacturing systems for precision metal components with the modular VL 2 vertical-pick up turning machine for the efficient machining of components up to 100 mm in diameter. The VL series will be on display for visitors to experience the successful EMAG modular inverted vertical lathe design. With the aim to...

Read More »
EMAG at CMTS 2017, Booth 2418!
Machinery & Machining Tools

EMAG at CMTS 2017, Booth 2418!

At CMTS 2017, September 25-28 at the International Centre in Mississauga, ON - EMAG L.L.C. will feature a variety of our manufacturing systems for precision metal components. The modular VL Series for chucked components will be on display, with our VL 4 machine, for visitors to experience the successful EMAG modular inverted vertical lathe design. With the goal to develop a system of modular...

Read More »

Spring News Letter
Electronic Components & Devices

Spring News Letter

POINTS OF INTEREST: NEW Address: 1529 Cottage Street, Ashland OH 44805 MARCH : MORI SEIKI PASSES ITS FINISHING TESTS CINCINNATI GRINDERS ARRIVE FOR THEIR REBUILD (P. 2) ACU-RITE SPRING SALE EVENT; COMPLETE WITH FREE SHIPPING! (P.2.) MORI SEIKI MARCH MADNESS The Mori will go home, looking new and performing great. Looking at the before after pictures gives you a peek into the process. The Mori...

Read More »

EXSYS to Spotlight Advanced Gearboxes, Lathe Tooling at SOUTH-TEC 2015
Communication Systems & Equipment

EXSYS to Spotlight Advanced Gearboxes, Lathe Tooling at SOUTH-TEC 2015

SAN ANTONIO, Fla., – Manufacturers in search of precision gear solutions or productive tooling for CNC lathes should stop by booth 1143 at SOUTH-TEC 2015, taking place October 27 – 29 at the Charlotte Convention Center in North Carolina. Here, EXSYS Tools, Inc. will showcase the latest gearboxes, tool holders and adapter systems it offers from EPPINGER. Suited for a range of applications,...

Read More »
Vertical Pick-Up Turning Lathes feature modular design.
Machinery & Machining Tools

Vertical Pick-Up Turning Lathes feature modular design.

Intended for use in manufacturing of medium and large batch runs, VL-Series is based on vertical pick-up system and features compact footprint that reduces floor space requirements while affording layout flexibility. There are 4 sizes available for handling 100–400 mm dia components, and all machines feature tool turret with up to 12 (driven) tools. Other features include integrated...

Read More »

All Topics