Laser Components

Feedthroughs

Morgan Technical Ceramics Showcases High-Performance Laser Components at Photonics West 2008

14-12-2007 Morgan Technical Ceramics (MTC), a leading manufacturer of innovative ceramic, glass, precious metal, piezoelectric and dielectric materials, will exhibit high performance laser components at booth #6021 at Photonics West 2008 held at the San Jose Convention Center, San Jose, CA, from January 19-24, 2008. MTC will showcase its line of high performance power feedthrus and ceramic...

Read More »
Fiber Optics

General Availability of LIEKKI(TM) 100W CW Optical Engine Modules

Lohja, Finland, September 10, 2007 - LIEKKI Corporation, a leading supplier of highly doped fibers and optical engine modules for fiber laser and amplifier applications, today announced the general availability of its 100W CW optical engine modules. LIEKKI has moved forward from the prototype stage to general availability of its 100W CW optical engine modules. LIEKKI(TM) optical engines integrate...

Read More »
SIFAM Ships 1 Millionth Fused Fibre Component.
Multiplexers

SIFAM Ships 1 Millionth Fused Fibre Component.

Torquay, UK - April 24, 2007- To coincide with the upcoming Laser 2007 exhibition in Munich June 18-21, SIFAM Fibre Optics Ltd is proud to announce the shipment of its one millionth fused optical fibre component. Following a tradition of supporting the most demanding industrial applications, SIFAM's one millionth device will be supplied for integration in the latest high power fibre laser. Since...

Read More »
Combiners

Olympus Offers M-COMB Laser Combiner

Center Valley, PA, October 15, 2006 - Olympus has introduced the M-COMB Laser Combiner, designed for the FV1000 laser scanning confocal microscope. The system is designed to simplify the integration of multiple laser sources. It can be used with laser diodes at 405, 440, 473, 559 or 635 nm, the green Helium 543 nm gas laser, and the Multi-Argon (457/488/514.5 nm ) gas laser. The availability of...

Read More »
Ceramics

CoorsTek Introduces Diffuse Reflecting CeraLase(TM) Ceramics for Laser Equipment Components

New material combines high diffuse reflectance with the high-temperature durability of ceramics to provide superior performance in high power, solid-state laser applications. December 7, 2006 - Golden, CO - CoorsTek, one of the world's largest technical ceramics manufacturers, today officially announced introduction of its new CeraLase(TM) ceramic materials developed specifically for laser...

Read More »
Fiber Optics

Bookham and Liekki to Demonstrate Compatible Pump and Optical Engine Modules at Photonics West

Combined Technology to Support Fiber Laser and Amplifier Applications Lohja, Finland and Zürich, Switzerland, January 17, 2007 - Liekki Corporation, a leading supplier of highly doped fibers and optical engine modules for fiber laser and amplifier applications, and Bookham, Inc. (Nasdaq: BKHM), a leading provider of optical components, modules and subsystems, including high power laser diodes,...

Read More »
Lasers

Bookham Continues to Expand High Power Laser Diode Portfolio at Photonics West 2007

San Jose, CA - January 15, 2007 - Bookham, Inc. (NASDAQ: BKHM), a leading provider of optical components, modules and subsystems, today announced that it will unveil an expanded portfolio of high power laser diode products at Photonics West, later this month. The launch includes a range of new higher performance laser diodes designed for industrial applications, and a number of devices that are...

Read More »
Laser Components

Accessory Kit facilitates femtosecond laser experiments.

Designed to help set up and execute laser experiments using Ti:sapphire femtosecond oscillator, Laser Accessory Kit bundles laser optics and opto-mechanical components together in one box. Optical components offer optimal performance over spectral range of 700-950 nm. Included photo detectors allow detection of oscillator pulse train, while filters and beam splitters remove stray green pump laser...

Read More »
White Light Source is designed for ultrafast lasers.
Laser Components

White Light Source is designed for ultrafast lasers.

Self-contained and ready for use with amplified Ti:sapphire lasers, Jibe White Light Continuum Generator (WLCG) provides broad spectrum for applications where materials' characterization can be improved according to how samples interact with range of colors. Pumped with 0.3 mJ, 100 fs pulses, at 1 kHz repetition rate, Jibe WLCG generates 10 Â-µJ of white light continuum. Spectral coverage is...

Read More »
Cube Beamsplitters suit 532 or 1064 nm Nd:YAG lasers.
Laser Components

Cube Beamsplitters suit 532 or 1064 nm Nd:YAG lasers.

TECH SPEC(TM) High-Energy Polarizing Cube Beamsplitters handle laser-power densities up to 5 J/cmÂ-² and use multilayer dielectric film technology to minimize reflection and absorption losses. Units offer extinction ratio of > 500:1. Precision fused silica substrate and optical contact bonding prevents need for adhesive between prisms and improves parallelism of incoming and exiting beams....

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics