Ladders

Ladders

Folding Ladders have portable, space-saving design.

Designed for portability and space efficiency, VESTIL lock and roll folding ladders are constructed of all-welded steel and stand at 58° with 24 in. width. Products are available in 40, 50, and 60 in. heights and have total capacity of up to 350 lb. While 2 wheels foster portability, they also lock into place with 7 in. steps for safe climbing. When not in use, ladders can fold down for...

Read More »
Ladders

Extension Ladders work safely on most surfaces.

Designed to eliminate hazards of uneven ground, Equalizer(TM) Extension Ladders feature built in leveler legs that allow user to level ladder without use of unsafe materials. Ladders are available in aluminum and fiberglass and also feature dual action foot for use on hard or penetrable surfaces.

Read More »

Rescue Ladder weighs 3.8 lb.

Equipped with plastic reinforced rungs and staggered steps, Rollgliss® Rescue Ladder comes with 3 connecting carabiners that can be anchored to any structure or other anchorage connectors, including web tie-off adapters, cable tie-off adapters, and fixed beam anchors. It can also be mounted to any davit arm with accessory plate, to provide access into confined spaces, and is available in 8...

Read More »
Hardware Kits let users make their own rolling ladder.
Hardware

Hardware Kits let users make their own rolling ladder.

Offered in 3 types, Hardware Kits feature quiet rollers and non-marring wheels. Kit contains 2 bottom rollers, 2 rolling top guides, 7 rung support rods for steps, fasteners, and instructions. Track kit includes 1 in. dia x 8 ft powder-coated black aluminum track, 2 end stops, support brackets and screws, and steel support dowels. Available in 8, 9, or 10 ft length, which user cuts to desired...

Read More »
Portable Access Ladder
Ladders

Portable Access Ladder

PAL100 With Safety Enclosure The portable access ladder has a stationary base section 9'0 high x 5'0" long with a top landing 1'6" long x 2'0" wide. The lower stationary section has a "ships" ladder with 9-12" rises, 8-4" grip strut treads for accessing the upper platform. The stationary base has 8" semi-pneumatic casters with brakes on the rear and 8' stationary semi-pneumatic wheels on the...

Read More »
Hoist / Winch Drums

UNIFUSE Introduces Two New Products This August

A wire shipping / payout drum and a 3-step step stand now available with a handrail. (Staatsburg, NY)- UNIFUSE, #1 for Custom Plastic Products, announces the introduction of two new products to its offerings. The new products are a 25 diameter wire shipping drum with stacking lid and an upgrade of the SS3 step stand, now made available with a handrail. Both new products are manufactured under the...

Read More »
Industrial Platforms

Federal Signal Subsidiary E-ONE Enhances Security and Well-Being with New Fire Rescue Vehicles

OAK BROOK, Ill., May 16 - Federal Signal Corporation (NYSE:FSS) announced today that its E-ONE subsidiary has introduced a suite of products that offers firefighters new ways to help protect people, property and the environment. The new product offerings include: o The Quest(TM) chassis - features industry leading ergonomic cab design, 100% improvement of swept windshield area and added interior...

Read More »
Ladders

Attic Ladder can be installed by one person.

Available in 8 and 10 ft models, Televator(TM) Ladder has weight capacity of 250 lb and fits any opening 22 x 22 in. and larger. It utilizes small, rough opening, allowing installation in places not accessible before. All hardware and instructions are included.

Read More »
Ladders

Ladders feature industrial-grade design.

Designed for professional contractors and trades people, PRO Series is built with double-pass welds and high-impact rung guards. Black anodization helps protect ladder from oxidation while keeping user's hands clean and free from aluminum oxide. Ladders are individually serialized, facilitating identification and asset tracking.

Read More »
Ladders

Electrician Ladder is designed to facilitate common tasks.

Type IAA Werner Ladder, Electrician's JobStation(TM), incorporates 3 ToolLasso(TM) Bungee Systems to keep tools securely mounted and within reach. In addition to slip-resistant steps, ladder features conduit holder, hacksaw hook, and 2 wire spool holder brackets. Custom HolsterTop(TM) has slots that hold various tools, with scale in 1/8 in. increments. Adjacent groove holds up to 1 in. pipe for...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers