Process Analyzer measures reactive liquids.
NIR Chemical Process Analyzer System uses only Teflon-® and other non-reactive materials for components that are in contact with samples. Configurations are available for fiber optic based NIR and UV/Vis for analysis applications of aqueous acid and caustic, as well as hydrocarbons, chemicals, and pharmaceuticals.Read More »
Rodless Cylinders are short, thin, and light.
HORV Series are shorter, thinner, and lighter than company's conventional rodless cylinders of equal bore and stroke. Block type end cap eliminates need for mounting brackets and zero stroke dimension results in dead stroke that is 35% shorter than band-type rodless cylinders. Lightweight body places no loads on actuator axis or stand, even when using Y-Z axis. Cylinders are available with NPT...Read More »
Elemental Analyzer operates under Windows(R) NT or XP.
Eagle III micro-Probe(TM) consists of table-top, micro-XRF elemental analyzer that uses capillary optics to concentrate X-ray beam size down to 100 micrometer diameter on sample. High-intensity X-ray optics, CCD video imaging cameras, and motorized XYZ stage allow non-desructive, simultaneous Na through U analysis of solid objects, liquids, and powders. Eagle III software displays all information...Read More »
Material Analyzer measures heat flow.
SDT 0600 materials characterization analyzer simultaneously provides heat flow measurement from ambient temperature to 1,500 deg C and weight change. It has dual balance mechanism, bifiliar found furnace, and horizontal purge gas system with mass flow control and gas switching capability. Platinum/platinum-rhodium thermocouple embedded in each beam ensures accurate and precise transition and...Read More »
Electronic Manufacturing Supply Chain Risk: Are You Vulnerable?
This white paper provides an in-depth overview into electronic manufacturing supply chain risks.Read More »
Balances incorporate Super Hybrid Sensor.
GF-400 and GF-600 offer capacities of 410 and 610 g, respectively, with 0.001 g resolution. GF-4000 and GF-6000 offer capacities of 4,100 and 6,100 g, respectively, with 0.01 g resolution. GF-800 features 8,100 capacity and 0.1 g resolution. Sensor provides response time of 1 sec. All balances include VFD display, comparator function, parts counting, and percentage functions. They have IP54...Read More »
Cyanide Analyzer works in 90 sec.
CNSolution(TM) cyanide analysis system uses gas diffusion ligand exchange procedure to measure available cyanide or cyanide amenable to chlorination (CATC) species in 90 sec. Total cyanide can be measured down to 2 micro g/L (ppb). It has single or dual channel analyzer, WinFLOW(TM) Software, and random access autosampler. Ultraviolet irradiation of sample can be added to measure total cyanide...Read More »
Solvent Recovery Unit recycles paints/solvents.
Model R-2A non-vacuum solvent recovery unit distills waste solvents with boiling points between 95 and 375 deg F. Cast-in aluminum heater provides enough heat to distill up to 4 gallons of solvent in 8 to 12 hours.Read More »
Steel Containers can be configured with multiple options.
Folding Corrugated Steel Containers provide reduced freight costs (2.3:1 ratio) and maintenance-free storage of products weighing up to 4,000 lbs. Designed to work in unison with plastic collapsibles, containers are available in 45 x 48 x 33 in. and 48 x 63 x 34 in. sizes. They utilize hinged, half-drop access doors on either side to provide access for loading and unloading. Options include...Read More »
CO Analyzer measures down to 0.1 ppm.
Enviromax Gas Analyzer uses non dispersive infrared technology and long path length sample cell to measure CO over range of 0 to 50 ppm with 0.1 ppm resolution. Typical interfering gases such as CO2 and water vapor have minimal effect. It has automatic calibration, 4 user-selectable full scale analog output ranges, selectable output of 1, 5, or 10 V, 3 user-selectable response times, and audible...Read More »
Disrupter Press disintegrates cells.
Enhancements to FRENCH(R) Press include startup kits and valves. Start Up Kit and Miniature 20K Start Up Kit both include motor driven Laboratory Press, spare parts kit, and cell filling stand. Valves include Press Flow Valve and Press O-ring Stem Valve, both for Standard 40K pressure cell. Press and pressure cells are used for disintegration of chloroplast materials, blood cells, unicellular...Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.Read More »