Process Cooling System provides closed-loop operation.
Coolers

Process Cooling System provides closed-loop operation.

Fluid Cooling System packages water-to-air heat exchanger and pumping system to cool process water when water temperature of 5°F above ambient dry bulb temperature is acceptable. Factory plumbed and wired, system comes complete with plug-n-play capabilities. When process water temperatures at or below 70°F are necessary, chiller is required.

Read More »
Absorbance Microplate Reader offers fast reading speeds.
Microplate Readers

Absorbance Microplate Reader offers fast reading speeds.

Model 680 offers on-board software capabilities and validation protocol as well as optional on-board printer and temperature control. Stand alone instrument may be controlled by PC using Microplate Manager PC software. Wavelength range is 400-750 nm. Model 680 reads 96-well plate in 6 sec in Fast Read mode and performs dual wavelength reads in 10 sec. Checkmark Reader Performance Check Plate...

Read More »
Cable Puller is designed for light to medium-duty pulls.
Pullers

Cable Puller is designed for light to medium-duty pulls.

Designed for continuous pulls to 2,000 lbs, Mini Brutus(TM) uses Rigid(TM) or mini-Collins® pipe threader as its power drive unit. Unit is capable of pulling up to 18 ft/min and includes multi-position, adjustable arm that extends over 9 ft, allowing cable pulls from any direction. Self-contained design includes collapsible, two-part, powder coated frame (44 x 13Â-½ x 18 in.);...

Read More »
Linear Slides provide smooth motion.
Slides

Linear Slides provide smooth motion.

Series SM Slide is available in 8, 12, 16, 25, and 32 mm bore sizes, with choice of 3 travel lengths. Slides provide smooth linear motion at 2x thrust of single bore cylinder. Optional porting through guide shafts allow saddle to move without flexing incoming air. All units are ready for 8 mm proximity switch. External mounting kits prevent flexing of electrical connectors. Slide is available in...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Color Number Determinator measures color in transparent liquids.
Testers

Color Number Determinator measures color in transparent liquids.

LICO 400's incorporated cuvette compartment provides automatic cuvette type detection and lockIN technology, which enables users to measure with open lid. Its external barcode reader enables sample identification, while integrated data memory enables users to save 1000+ reference values. Data logger records all information around measurements, and unit's D Floppy disk drive allows for software...

Read More »
Enclosure protects safety light curtains.
Safety Equipment

Enclosure protects safety light curtains.

IP67 Enclosure resists many compounds and chemicals, and protects MS4600 series safety light curtains in washdown applications. Enclosure is constructed with acrylic tube, acetal ends, and stainless steel brackets, and is available in sizes from 10.4 to 82.4 in. Radial seal prevents fluids from coming in contact with safety light curtain. Enclosure has no ill effect on curtain's sensing range.

Read More »
Linear Slides suit harsh applications.
Slides

Linear Slides suit harsh applications.

Simplicity® heavy duty linear slides can be custom designed to fit specific needs. Self-lubricated bearings have Frelon® bearing surface that eliminates metal-to-metal contact and absorbs vibration and shock loads. They increase load capacity to over 5 times that of traditional rolling element bearings. Units have no mechanical components to become locked or to gall shafting. They...

Read More »
Locking Interface keeps stainless steel enclosures closed.
Enclosures

Locking Interface keeps stainless steel enclosures closed.

M5 Series NEMA 4X stainless steel interface has locking mechanism to comply with FDA regulation #21CFR211, which requires validated systems be locked. Over 4,000 different combinations of cables, connectors, and outlets in NEMA 1/12/4/4X housings are available. M5 Series meets requirements of drug, food processing, dairy, chemical, and petro-chemical industries.

Read More »
Mills

Face Mill performs roughing and finishing.

WGC Milling Cutter has 45° lead high performance face mill, and attains high quality surface finish with economical M class insert. Face milling system generates low cutting forces with low levels of runout. It is suitable for both roughing and finishing operations.

Read More »
Software and Interface support reciprocating compressors.
Miscellaneous Software

Software and Interface support reciprocating compressors.

Model 3500/22M Transient Data Interface (TDI) includes capabilities for capturing reciprocating compressor data and analyzing it in System 1(TM) software. TDI's alarm capture capabilities provide waveform information before, during, and after events, making diagnosis of transient events possible. System 1 v3.0 includes support for rod position / rod drop measurement technology. Custom rules for...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers