MD133 Milling Cutter features chip breaker.

MD133 Milling Cutter features chip breaker.

MD133 Milling Cutter comes in 0.25 to 0.75 in. diameters and cutting lengths of 5 × Dc. Unit is available in grades such as WJ30RD for steel and WJ30RA for stainless steels. Product is designed for small width of engagement and high depth of cut. Cutter is suitable for engineering, aerospace, energy, and the mold and dies industries applications. MD133 offers even wear pattern during entire...

Read More »
SpectraMax® iD5 Microplate Reader is embedded with SoftMax® Pro 7 software.

SpectraMax® iD5 Microplate Reader is embedded with SoftMax® Pro 7 software.

SpectraMax® iD5 Multi-Mode Microplate Reader offers built-in absorbance, fluorescence, luminescence, time-resolved fluorescence and tunable fluorescence polarization read modes. Unit comes with optimized reagents, acquisition and analysis tool. Product enables user to capture flash assays and features automatic filter identification and western blot detection. This five-mode microplate reader...

Read More »
Removable Hinge Pin Enclosures are IP66 rated.

Removable Hinge Pin Enclosures are IP66 rated.

Removable Hinge Pin Enclosures are offered in WRD-FS4 and WRD-FSD4 series. Units are suitable for housing motors, drives and PLCs applications and are made of carbon steel material with gray powder coat. Products feature heavy duty lifting eyes and Uni-strut mounting channels and are NEMA 4 rated. WRD-FS4 comes with 14 different single door enclosures whereas WRD-FSD4 consists of 12 double door...

Read More »
PQ Pass-Thru™ Power Recorder/Analyzer features internal communications.

PQ Pass-Thru™ Power Recorder/Analyzer features internal communications.

PQ Pass-Thru™ Power Recorder/Analyzer is integrated with dual cellular antennas and can be connected to Ethernet. Unit is used to monitor and record ac power feeding and is suitable for medical, laboratory and sensitive electronic equipment applications. Product offers daily or weekly reports and notifications when there is a power failure. Analyzer is equipped with Lab PQube3®...

Read More »
N5194A UXG X-Series Agile Vector Adapter is equipped with built-in solid-state attenuator.

N5194A UXG X-Series Agile Vector Adapter is equipped with built-in solid-state attenuator.

N5194A UXG X-Series Agile Vector Adapter comes with 2 Gsample/second digital baseband generation systems which produce wideband signals up to 1.6 GHz bandwidth. Unit operates in a frequency range of 50 MHz to 20 GHz and offers 120 dB of agile amplitude range. Product provides frequency, amplitude and phase switching speed of 170 ns and features multi-port configurations. Adapter can be used with...

Read More »
ProMetric® Imaging Photometers come with programmable inspection software.

ProMetric® Imaging Photometers come with programmable inspection software.

Providing CCD resolutions up to 29 megapixels with dynamic range to 73.4 dB, ProMetric® Imaging Photometers and Colorimeters are used for inspecting with tools to determine presence, position, and routing of cables, fasteners, connectors and screws. These units provide detailed images for evaluating and measuring variations in luminance, chromaticity and pixel-level defects. Units with...

Read More »
Enclosures Stop the Cold

Enclosures Stop the Cold

October 5, 2017 – STI’s Heated Polycarbonate Enclosures maintain a temperature above freezing allowing a wide range of sensitive units to be installed outdoors, in freezers, unheated warehouses or storage units. The enclosures are engineered with a radiant heat plate which prevents LCD displays from becoming sluggish or freezing. Designed to operate on 12, 16.5 or 24 volts, the cover includes...

Read More »
M2471 Copy Milling Cutter feature Tiger.tec® silver coating.

M2471 Copy Milling Cutter feature Tiger.tec® silver coating.

M2471 Copy Milling Cutter comes with indexable inserts which is fastened by Torx Plus screws. Unit is suitable machining of turbine blades and for face milling of steel, stainless steel, and difficult-to-cut materials. Product is offered with ScrewFit interface or shell mill mount and provides 4 mm depth of cut. Cutter’s inserts are available in grade WSP45S and feature D57 and F67 geometries.

Read More »
Vanta™ VCA Handheld XRF Analyzer is IP65 rated.

Vanta™ VCA Handheld XRF Analyzer is IP65 rated.

Vanta™ VCA Handheld XRF Analyzer is integrated with 50 kV silver X-ray tube. Unit is operated in a temperature range of -10 °C to 50 °C and features an optional Wi-Fi connectivity. Product is used for elemental analysis and quantification in alloys and comes with 3-year warranty. XRF Analyzer uses Axon™ technology with an intuitive interface.

Read More »
E8500 PLUS Emission Analyzer features PID VOC sensor option.

E8500 PLUS Emission Analyzer features PID VOC sensor option.

E8500 PLUS Emission Analyzer is suitable for boiler, burner, engine, turbine, furnace and combustion applications. Unit is equipped with 9 gas sensors and internal thermoelectric chiller. Ideal for CO₂ measurement using NDIR sensor, product comes with sample conditioning system for low NOx and SO₂.

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics