Tester/Calibrator works with LCD, DLP, and LCoS projectors.
Calibrators

Tester/Calibrator works with LCD, DLP, and LCoS projectors.

PTS provides turnkey solution for testing and calibration of front and rear projection systems, delivering measurements of display brightness, uniformity, contrast ratio, color, color uniformity, distortion, focus, gray scale, and convergence. Product also detects and identifies display defects and blemishes. System elements include PM-1400 CCD based imaging colorimeter, control PC, and ProMetric...

Read More »
Portable Gas Analyzer offers up to 5 sensors.
Gas / Chemical Analyzers

Portable Gas Analyzer offers up to 5 sensors.

GreenLine 4000 hand-held, multifunction, combustion and emission analyzer measures O2, CO, NOx, SO2, and HxCy. It includes built-in impact printer, and provides flame ionization sensor, flammable gas leak detector, draft and differential pressure meter, temperature and humidity meter, and gas velocity with pitot tube. Unit is suitable for boilers, heaters, and stationary internal combustion...

Read More »
Sleeves, Nuts, and Ferrules can hold 5,000 psi.
Nuts

Sleeves, Nuts, and Ferrules can hold 5,000 psi.

Silica SealTight(TM) sleeves, nuts, and ferrules solve problem of connecting capillary tubing to standard 10-32 coned ports intended for 1/16 in. OD tubing. Teflon® FEP sleeves plus PEEK(TM) NanoTight(TM) nuts, and Tefzel® ferrules provide sealing and can be finger tightened to hold 5,000 psi. Twelve color-coded IDs accommodate capillary ODs from 70 Â-µm to 1 mm.

Read More »
Linear Slide Option protects drives from damage.
Slides

Linear Slide Option protects drives from damage.

Linear Drive Assemblies use Linear Slides to remove twisting and bending forces from drive unit, guide rails, and supports. By lifting payload weight off drive unit, linear slide attachments assure that bearing assembly is not under undue pressure. Models SLS and L2 mount to top of drive head and handle medium- and heavy-duty loads, respectively. When vertical space above drive head is limited,...

Read More »
Top Loading Balances provide measurements in less than 1 sec.
Balances

Top Loading Balances provide measurements in less than 1 sec.

Series UW/UX utilizes UniBloc mechanism, which provides quick response and stability against environmental changes. Windows®Direct communication function requires no software installation to integrate balances with existing lab or business software. Balances provide specific gravity measurement, piece counting, and check weighing. Data capture function sends weighing data and GLP, GMP, and...

Read More »
Trace Analyzer is based on Cavity Ring-Down Spectroscopy.
Gas / Chemical Analyzers

Trace Analyzer is based on Cavity Ring-Down Spectroscopy.

LaserTrace(TM) modular, multi-point, multi-species analyzer detects molecular contaminant down to parts-per-trillion levels. It can detect H2O, O2, CH4, H2, CO, NH4, H2S, and HF in range of 100 ppt to 1000 ppm. Using fiber optic connections, unit affords remote monitoring of up to 4 different analytes at 4 sample points for as many as 4 different gases. It is calibration-free and transportable.

Read More »
Macroscope suits forensic comparison applications.
Laboratory Equipment

Macroscope suits forensic comparison applications.

Model FS C integrates tilting binocular tube to accommodate examiners of all statures. Automation and motorization allow synchronous control of both stages, as well as remote positioning of stage and focus controls. Macroscope enables side-by-side or superimposed image comparison. Built-in 5x magnification changer expands magnification range from 4-60x and provides up to 8 discrete magnification...

Read More »
TOC Analyzers measure up to 25,000 ppm.
Gas / Chemical Analyzers

TOC Analyzers measure up to 25,000 ppm.

Online TOC-Vc Analyzers feature detection limit of 4 ppb. Two-point calibration curve can be increased to 7 points with optional Octopus autosampler. Auto-validation software for USP applications is standard. Choice of data output includes analog mode or RS232. Six contact outputs monitor instrument status, errors, and alarms while contact inputs permit remote start, stop, calibration, and alarm...

Read More »
Instrument/Meter Enclosure suits hazardous locations.
Enclosures

Instrument/Meter Enclosure suits hazardous locations.

UL Listed and CSA Certified, Model AGUB is made of copper-free cast aluminum with corrosion-resistant finish. Precision-threaded flame path is provided between box and cover. Large cover opening allows access to electrical devices and permits fast wire splicing and pulling. O-ring gasket seals out moisture, dust, oil, and dirt for interior and exterior locations. Cover is offered with sight glass...

Read More »
Inserts/Grades provide multi-directional turning.
Inserts

Inserts/Grades provide multi-directional turning.

MDT(TM) Threading Inserts, available in CP500 grade, feature 55° whitworth threads, and partial profiles of 60° for UN and ISO threads. They can produce right- and left-handed threads both toward and away from chuck. Grooving inserts include CP500 grade, and in 13 mm style, are suited for small bore and face machining. Grade TK150 works with cast irons and hardened steel. MDT system...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers