DVEO's Demodulator-Receiver and Decoder is Designed for Content Monitoring and Repurposing
Decoders

DVEO's Demodulator-Receiver and Decoder is Designed for Content Monitoring and Repurposing

TLV500E-ATSC 3.0™ Demodulator-Receiver and Decoder comes with one BNC connector and supports 576i/480i, 576p/480p, 720p and 1080i/1080p resolutions. This unit converts HD input to SD out and provides 12G/12G/1.5G/1.5G or Quad 3G and HDMI 2.0 4K/60P outputs. The TLV500E-ATSC 3.0 comes with front panel controls, remote management software and upgradeable firmware. The unit features five slots...

Read More »
CGM 750 Cone Mill Uses Vacuum Conveying System for Feeding
Mills

CGM 750 Cone Mill Uses Vacuum Conveying System for Feeding

Kason’s 750 mm diameter CGM 750 Cone Mill is designed for grinding fatty, heat sensitive, sticky, moist or fragile materials. Unit delivers particle size distribution from 125 to 250 microns and features swing-down conical discharge chute for lowering 250 lb cone housing. This mill is constructed of 304 or 316 stainless steel with fully interlocked moving components with time-delay function....

Read More »
E4500 Industrial Emissions Analyzer Features Storage of up to 2,000 Tests
Gas / Chemical Analyzers

E4500 Industrial Emissions Analyzer Features Storage of up to 2,000 Tests

E4500 NOx Industrial Emissions Analyzer is available with NO and NO2 Sensors. Unit comes with dilution pump for CO measurements and built-in printer. This analyzer offers NOx measurements with 0.1 ppm and analyzer can be used for measuring temperature and pressure. Unit is designed for monitoring emission of boilers, burners, engines, furnaces, turbines, kilns and incinerators. E4500 features...

Read More »
Polypropylene Glove Box are compliant to ISO 5 and USP 797 standards.
Gloveboxes

Polypropylene Glove Box are compliant to ISO 5 and USP 797 standards.

2600 Series Polypropylene Laminar Flow Glove Box is offered in 2600-2-A (three Feet Glove Box) and 2600-2-B (four Feet Glove Box) models in 24 x 28.5 x 30 in. and 36 x 28.5 x 30 in. sizes. Units provide sterile positive pressure environment for the compounding of non-hazardous drugs. Boxes come with HEPA filter that removes 99.99% of particles down to 0.12 microns.

Read More »
5 Questions to Ask When Choosing a Custom Glass Manufacturer
Sponsored

5 Questions to Ask When Choosing a Custom Glass Manufacturer

Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.

Read More »
Lockable EnviroArmour Enclosures come with removable doors.
Enclosures

Lockable EnviroArmour Enclosures come with removable doors.

Lockable EnviroArmour Enclosures are offered in tough polycarbonate and protect sensitive devices against weather, vandalism, tampering and theft. Units are suitable for control panel, medical equipment, alarm panels, wireless equipment and DVRs. Enclosures are available in thirteen sizes with choice of tinted or opaque door and mounting plate options. Units feature ventilation options such as...

Read More »
Commander Series Enclosures feature polyurethane gasket.
Enclosures

Commander Series Enclosures feature polyurethane gasket.

AttaBox offers Fiberglass and Polycarbonate options in Commander Series enclosures. Fiberglass enclosures are made from fiberglass-reinforced polyester and features captive stainless steel cover screws whereas Polycarbonate enclosures come in 22 mm and 30 mm sizes and come with external flush wall design, unobstructed internal sidewalls, polymer cover screws. These enclosures are high impact...

Read More »
ISO H Advance Line of Solid Carbide Milling Cutters are tailored for hard machining.
Mills

ISO H Advance Line of Solid Carbide Milling Cutters are tailored for hard machining.

ISO H Advance Line of solid carbide milling cutters is designated MC089 (high-feed cutting and pre-finishing), MC183 (side milling and finishing), MC187 (de milling, dynamic milling, and finishing), MC281 (mini end mills), MC388 (roughing and finishing), MC480 (mini ball-nose end mills), and MC482 (ball-nose end mills with two and four flutes). Mills feature mini and multi-flute, shoulder/slot,...

Read More »
SPECTRO ICP Analyzer Pro Software minimizes recalculation time.
Software

SPECTRO ICP Analyzer Pro Software minimizes recalculation time.

SPECTRO ICP Analyzer Pro Software is designed for SPECTROBLUE and SPECTRO ARCOS ICP-OES Analyzers. The software increases intuitive experience and speed of processing. SPECTRO ICP provides user with customizable modules and plug-ins and displays only essential information. Software meets US FDA standards and delivers solid security.

Read More »
Adam's Lab Balances come with touchscreen display.
Balances

Adam's Lab Balances come with touchscreen display.

Adam’s offers Equinox series and the Solis series of balances that offer a readability of two to five places. Equinox series balances are offered with capacities ranging from 360g to 8,200g with readabilities 1mg and 0.01g whereas Solis series models in 20g to 8,200g with readabilities of 0.1mg, 1mg and 0.01g and can store up to 99 ingredients. Equinox models features formulation/recipe...

Read More »

All Topics