New Laboratory and Research Supplies and Equipment Products

Folded Covers protect equipment.

Folded covers are available in wide range of materials to suit environment, from light duty dust to harsh abrasives. They have internal support system consisting of stiffeners or ribs made from rigid PVC and die cut to fit guide configurations of equipment to be protected. Folded bellows have maximum open-to-close ratio, useful in limited space. Mounting end plates can be engineered and...

CO2 Analyzer mounts on wall in NEMA enclosure.

CEA 266 infrared C02 gas analyzer comes with water and dust tight NEMA 4X enclosure, digital display readout, 0-5 Vdc and 4-20 mA outputs, self-draining water trap and dust filter, and 2 user adjustable alarms and contact relays. It is available in ranges of 0-2000 ppm, 0-5000 ppm, 0-1%, 0-2%, 0-5%, 0-10%, or 0-20%. Sample gas is continuously drawn into unit through built-in air pump....

UV Exposure Meter displays dosage and uniformity.

Compact, self-contained IL393UV Light Bug radiometer measures total dosage and peak irradiance of UV illumination occurring in real-time inside equipment. LCD provides immediate graphic representation of light distribution or illumination uniformity, and it holds two sets of measurements for making comparisons in real-time. It withstands intense UV irradiance and temperatures found inside curing...

Moisture Analyzer finds traces in parts per billion.

MTO-1000-H20 trace moisture analyzer combines CW laser technology with cavity ring-down spectroscopy (CRDS) to measure moisture in electronic gases, including corrosives. It makes accurate measurements in less than 1 sec, making it suitable for continuous on-line process control. Instrument does not require calibration, resists corrosion, and has multi-valve inlet that allows for moisture...

Site Amenities & Furnishings: Key Considerations When Sourcing A High-Volume Manufacturer

This white paper looks at the six key considerations when sourcing a high-volume manufacturer of site amenities and furnishings. Download now to find out more.

Analyzer monitors concentrations of hydrocarbon gas.

Process-control gas analyzer, carrying full FM and CSA approvals, is designed to monitor methane, propane, butane, ethanol, or any of 70 hydrocarbon gases. It taps into gas-flow manifold or pipe for continuing in-stream and on-stream sampling. Readout can be fed to upstream control valves for automatic correction of process parameters. Any change in gas concentration is detected immediately by IR...

Air Sampler checks airborne contamination.

Venerable MB2 can be used to sample airborne contamination in indoor and outdoor environments. Microorganisms are collected on agar surface of contact plate, which is removed and sent to analytical laboratory. Colony count, combined with volume of air sample, is used to calculate number of microorganisms present per cubic meter of air.

Industrial Mats are designed for hard use.

Knobby Rubber Mats, available in both black and white, feature knobs that allow for circulation of air or liquids with minimum of rubber in contact with floor. Available in 18x25 in., 21x21 in., and 21x27 in. sizes, mats have die-cut holes for hanging and drying. They are used in processing plants to protect stainless steel valves, pumps, and fittings while cleaning and repairing. White mats are...

Conductivity Analyzers are for water/chemical processes.

Family includes Series 63 analyzer with predictive and reactive diagnostics; Series 53 general purpose analyzer; and Series 33 panel mount version for OEMs. Each has large backlit LCD that simultaneously displays measured conductivity values in Siemens/cm, total dissolved solids values in ppm, and concentration values in percent. Analyzers accept various contacting conductivity sensors and...

Humidity Analyzer monitors moisture in gases.

Model rh-plus MR 2350 relative humidity analyzer makes readings of 0-100%RH over temperatures of -15 to 85Ã-º C. Outputs are 0-20mA or 4-20mA, with system alarm relay and three adjustable relays with SPDT 2.5A contact. It has selectable failsafe mode, two-line LCD, and membrane-type pushbuttons for unit selection, ranges, setpoints, and special functions. Optional input permits external...

Milling Cutters work fast and efficiently.

Fix-Perfect aluminum milling cutter inserts have on-edge orientation and 34 deg positive rake angle. This geometry reduces insert edge buildup, improves tool life, and provides free cutting action that makes it possible to machine thin-walled parts. Inserts are available in uncoated, coated, and polycrystalline diamond versions.

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.