New Outdoor Wall Mounts Built to Accommodate 32 to 80-inch Flat-Panel
DWM3270XOUT and DWM3780XOUT features one-touch screen adjustment with -90 to +90° swivel, -20° to +10° tilt and -3° to +3° screen level rotation. Articulating arm extends screens away from the mounting surface and weatherproof flat-screen covers provide protection for the displays. Designed for permanent outdoor installation on patios, balconies, decks and outdoor spaces.
Read More »
Dedicated Die Plate Production Line Dramatically Reduces Lead Times for Standard Plates Used in Underwater Pelletizers
Nordson Has Built a Production Line that Enables the Company to Deliver a New BKG® Die Plate in Just 3 Weeks, Reducing Downtime and Increasing Flexibility for Customers MÜNSTER, GERMANY, October 12, 2020: Nordson Corporation has built a dedicated production line for BKG® die plates used in underwater pelletizing, enabling the company to deliver a new electrically heated die plate in only three...
Read More »
Dedicated Die Plate Production Line Dramatically Reduces Lead Times for Standard Plates Used in Underwater Pelletizers
Nordson Has Built a Production Line that Enables the Company to Deliver a New BKG® Die Plate in Just 3 Weeks, Reducing Downtime and Increasing Flexibility for Customers MÜNSTER, GERMANY, October 12, 2020: Nordson Corporation has built a dedicated production line for BKG® die plates used in underwater pelletizing, enabling the company to deliver a new electrically heated die plate in only three...
Read More »
New High-speed Synchronizer and Distribution Board Provides Four Front Panel MMCX Connectors
Model 5903 delivers multi-signal sync bus to each board to be synchronized containing sample clocks, reference clocks and gate/trigger and sync signals. Internal programmable clock generator can create sample clock frequencies from 1 to >5 GHz. Enables synchronous sampling and timing for a range of multichannel high-speed data acquisition, DSP, radar, beamforming, 5G, electronic warfare and...
Read More »
Ten Important Questions to Ask Before Selecting a Sign Company
This white paper outlines 10 questions that should be asked when selecting a sign company, eliminating some of the guesswork from making the best choice for your branding and signage needs.
Read More »
New High-speed Synchronizer and Distribution Board Provides Four Front Panel MMCX Connectors
Model 5903 delivers multi-signal sync bus to each board to be synchronized containing sample clocks, reference clocks and gate/trigger and sync signals. Internal programmable clock generator can create sample clock frequencies from 1 to >5 GHz. Enables synchronous sampling and timing for a range of multichannel high-speed data acquisition, DSP, radar, beamforming, 5G, electronic warfare and...
Read More »
New T-A Pro Insert Comes with Both Imperial and Metric Shanks, with Flat and Cylindrical Variants
Available in diameters ranging from 0.4370 in. – 1.882 in. (11.1mm. – 47.80mm.) and is ideal for holes ranging in stub, 3xD, 5xD, 7xD, 10xD, 12xD, and 15xD depths. Suitable for machine shops and high production manufacturers with incredible speed and cost per hole averaging 25% less than existing drills. Incorporates straight flutes redesigned for maximum coolant flow and excellent rigidity.
Read More »
New T-A Pro Insert Comes with Both Imperial and Metric Shanks, with Flat and Cylindrical Variants
Available in diameters ranging from 0.4370 in. – 1.882 in. (11.1mm. – 47.80mm.) and is ideal for holes ranging in stub, 3xD, 5xD, 7xD, 10xD, 12xD, and 15xD depths. Suitable for machine shops and high production manufacturers with incredible speed and cost per hole averaging 25% less than existing drills. Incorporates straight flutes redesigned for maximum coolant flow and excellent rigidity.
Read More »
Do-It Corporation Moves to Make PET Primary Hang Tab Material
South Haven, Michigan based Do-It Corporation is currently transitioning its primary material for making hang tabs to Polyethylene Terephthalate (PET). For over 40 years, Do-It Corporation has been making hang tabs and other retail display products in a variety of materials but with Polyvinyl Chloride (PVC) being its primary plastic choice. Recent improvements in manufacturability, material...
Read More »
Do-It Corporation Moves to Make PET Primary Hang Tab Material
South Haven, Michigan based Do-It Corporation is currently transitioning its primary material for making hang tabs to Polyethylene Terephthalate (PET). For over 40 years, Do-It Corporation has been making hang tabs and other retail display products in a variety of materials but with Polyvinyl Chloride (PVC) being its primary plastic choice. Recent improvements in manufacturability, material...
Read More »
New ColWear Wear Plates Achieve Superior Resistance to Abrasion
Produced using proprietary Colmonoy® nickel and Wallex® cobalt alloys, with optional tungsten carbide. Offer vacuum-furnace production techniques to improve the metallurgical properties of the alloy matrix. Ideal for applications such as industrial fans, where lighter materials improve the energy efficiency and balance.
Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.
Read More »
