New Labels Tags Signage & Equipment Products

Radius Inserts allow 90 degree milling.

AP Milling Inserts with -46 geometry are offered in industry standard radii, including 0.031, 0.063, 0.094, 0.157, 0.197, and 0.252 in. Grade X500 is for extreme applications and grade SP6564 is for applications in steels, stainless steels, and high temperature alloys.

Stencils mark plant and warehouse floors.

Made from 1/16 in. PolyTough plastic, Floor Marking Stencils are designed to improve plant and warehouse safety and traffic flow. User lays stencil on floor and paints over it with spray or brush. If marking gets damaged or worn, user can simply respray it. Stencils available include: CAUTION FORK LIFT TRAFFIC, KEEP AISLE CLEAR, and NO SMOKING.

Label Printer-Applicator applies labels to boxes on conveyors.

Model 5200 comes with choice of high-density thermal/thermal-transfer print engines that produce labels with text, bar codes, and graphics. Each engine is available in 203- or 300-dpi models, accommodates pressure-sensitive labels up to 6 in. wide by 6 in. long, and has print speeds up to 12 in. per sec. Model 5200 offers 3 label placement methods: air-blow, flex-tamp, and tamp-blow, all of which...

Indicator Nameplates display status on switch or relay.

Smart Lighted Nameplates incorporate up to 3 indicator LEDs and one output contact into traditional nameplate footprint. Front-replaceable indicator LEDs are available in 5 colors. Nameplates provide means to monitor and display status of events, trigger annunciation, and activate devices. They are available on company's Series 24 Lock-Out relays and breaker control switches, and Series 24 and...

Ten Important Questions to Ask Before Selecting a Sign Company

This white paper outlines 10 questions that should be asked when selecting a sign company, eliminating some of the guesswork from making the best choice for your branding and signage needs.

Marking System is electronically controlled.

Electromagnetically powered CN312Cm integratable marking system features 50 x 40 mm marking window, internal software, and camera mechanism. Unit meets aerospace marking criteria (IAQG SPEC 2000) on metal and plastic parts. Marking performance features 5 x 7 font with characters from 0.5 to 45 mm in height in steps of 0.1 mm. Can be integrated on production lines, assembly lines, or test stations.

Modular Labeling System will offer two operating modes.

Model ALP/4500 will initially print-and-apply labeling for up to 55 products per min; and with stepper motor module it will perform as label applicator at rate of 1800 ipm. Unit prints and applies variable information including alphanumerics, bar codes, and graphics with max print area of 4.1 in. W x 13 in. L. Print engine delivers 203 or 300 dpi print quality, depending on which head is used....

Locating Pin LED Holders suit high shock/vibration applications.

H-LP Series holders, suitable for single, bi-level, and tri-level T-1 (3 mm) LED display applications, are manufactured from black, 94-VO rated nylon material. They provide PCB retention and uniform elevation during processing and handling, making them suitable for industrial environments. LEDs are perfectly aligned on equally spaced centers. With bifurcated locating pin, widths from 0.170 in.,...

Labeling Tool offers labels in variety of colors.

Thermal-transfer ID PAL(TM) produces labels in colors suitable for voice, data, audio, video, security, HVAC control, and electrical applications. As specified in ANSI/TIA/EIA-606-A, different colors are used in certain applications. Label colors include orange, green, red, blue, and yellow. They can be applied to smooth/flat, curved, textured, and highly textured surfaces. ID PAL includes...

Label Maker System tags pipes and valves.

MaxiSoftÃ-® PipeMarker V2(TM) produces industrial markers and tags using computer, printer, and media. Software has hundreds of pre-defined pipe, valve, and tag markers that meet OSHA regulations and ANSI standards. Thermal transfer printer produces markers 2 or 4 in. wide, up to 50 in. long, with 203 dpi image quality. System prints on PolyDurable(TM) adhesive-backed rolls and thermal resin...

Mounting Arm rotates in almost any direction.

Scanner Mounting Arm is made of marine-grade powder coated aluminum. It features injection molded rubber ball which firmly mounts scanner to reduce movement or vibrations. Arm comes in 4 in. and 6 in. sizes. Extension joints and base plates are also available.

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.