New Labels Tags Signage & Equipment Products

Label Holder solves problems in wash down areas.

Model B30 Bottom Load Label Holder eliminates saturation and bleeding of labels caused by washdown solutions entering through open top of top-load label holders. One-piece, sealed-at-the-top design shields labels from water, cleaning fluids, and dirt. Soft, integral bead under clear front window provides added grip to hold labels in place. Bottom opening allows promotional signage to hang below...

RFID Kit enables printers to produce smart labels.

RFID Kit allows CL408e and CL412e printers, with serial numbers higher than 20390000, to produce labels and tags with RFID capability. Utilizing high frequency chips (13.56 MHz range) embedded in labels, kit enables printers to print on label and program chip inside label simultaneously. Information encoded in label or tag can be changed during its lifetime. Kit consists of interface card and...

Wipe-On Printer Applicator operates at up to 12 linear ips.

Model PA4000 includes direct drive DC stepper motor, powered rewind, 6.5 in. web width, and standard 12 in. diameter label roll capacity. Under microprocessor control, label placement is accurate to Ã-

Wipe-On Labeler provides zero downtime labeling.

Model 3155 applies pressure sensitive labels at 5,500 in. of web per minute. Automatic Speed Following automatically matches speed to varying product input speed to ensure accurate labeling within 1/64 in. R3 digital controller display rotates for operator viewing from any position, and can be set for remote viewing. Automatic labeling setup enables operators to preprogram labeler for multiple...

Converting Services 101: Types of Services, Applications, and How to Select a Provider

This ebook provides an in-depth guide to converting services.

Belt System provides closing/warning notification.

LambaÃ-® Belt with precision retracting spring allows 2 in. standard belt to extend from 0 to 7 ft 6 in. Unit attaches to Lamba cone in minutes, alleviating traffic in work areas and blocking off cleanup areas. Belt system offers support for flashing light or lock-in sign at top of cone for additional warning. System comes with ring weights, Lamba Belt, and Lamba cones. Cones offer 4-sided...

Labels warn of arc-flash hazard.

Arc-flash protection labels, available in 5 different types, comply with article 110.16 of 2002 NEC to reduce occurrences of serious injury or death resulting from arcing faults. Warning labels are offered in 3.5 x 5 and 5 x 7 in. sizes, and danger labels come in 5 x 7 and 4 x 6 in. sizes. Additional warning-type labels allow end users to write information directly onto label.

Tag Attaching System is offered as replacement for string.

AVERY DENNISON(TM) StringTach(TM) securely fastens brand, product care, and price tags to apparel, footwear, jewelry, eyewear, handbags, and leather goods. System consists of thread section made of polyester material, integrated with molded plastic head at one end and molded plastic tail at other end. Fasteners are available in lengths of 4.7 and 7.9 in. in black or white. They can be ordered in...

Zero Halogen Cable Markers protect printed paper labels.

NelcoLAM(TM) Cable Markers offer UV stabilized clear polyester laminate and acrylic adhesive which protects hand written notations and seals to PVC or polypropylene carrier. Attached via 5.0 mm cable ties, markers come in 3 sizes: 2-¼ x 5/8 in., 3 1/8 x 5/8 in., and 5 x 5/8 in. Waterproof markers conform to cables to which they are being attached. Service temperatures for PVC and polypropylene...

Stop Sign is made of corrugated polypropylene.

Flashing or steady-on, bi-directional BT1O-SS-RT signaling and warning device features 1 in. wide strips of 3M red reflective tape on top and bottom of both sides of sign. Hand-held, battery powered stop sign baton has 10 LED lights that can be seen up to 1/2 mile away from both sides of sign. This 18 in. octagon shaped, weather proof signaling device is 1.72 lbs and provides over 300 hours of...

Marking System makes industrial grade wire/cable markers.

Fully portable MarkerMaker(TM) makes UL-224, VW-1 compliant 3:1 heat shrinkable polyolefin wire and cable markers. Keyboard-operated device offers WYSIWYG display and repeatable printing. It includes 262 international characters and symbols, 6 bar code formats, and 3,000 character memory for printing alphanumeric messages. Unit accommodates snap-in 3:1 heat shrink polyolefin shrink tube...

DoorKing Releases Advanced Long Range Card Reader System with Frequency Hopping Technology

The DoorKing DKS AVI system is at the cutting edge of automotive security technology and represents a leap forward in engineering innovation. When it comes to long-range passive card readers, we lead the industry and set the standard for quality and performance. To find out why the DoorKing DKS AVI system is taking the automotive security industry by storm, see our video.