Labeling Machines can be configured for various applications.
Labelers

Labeling Machines can be configured for various applications.

Offered with open frame, modular Print and Apply Re-Pack products consist of 4 types: Wrap, Single Panel, Front and Back, and Bottom/Top Labeling Systems. Products integrate with print engines such as Sato, Zebra, and Datamax; 203, 300, or 600 dpi print heads; and Hot Stamp or Ink Jet Coding Systems. Cage style enables long, narrow labels to be applied directly to sides of products.

Read More »
Label marks air-eligible dangerous goods.
Labels

Label marks air-eligible dangerous goods.

Air Eligible Label, required by 44th edition of IATA Dangerous Goods Regulations, is used for marking all packages of dangerous goods that meet applicable air transport requirements. Marking, depicting airplane inside circle, may include Air Eligible printed on label. Both worded and wordless labels are available in paper and kraft stock in rolls of 500.

Read More »
Label Applicator labels up to 60 products per minute.
Labelers

Label Applicator labels up to 60 products per minute.

Model ST400 semi-automatic, rotary label applicator labels variety of round vial-sized products. Once product is detected, rotor automatically removes it from feed chute, labels and ejects it. Applicator includes direct drive DC stepper motor, powered rewind, 4.5 in. web width, and 12 in. diameter label roll capacity. Under microprocessor control, label placement is accurate to ±1/32 in....

Read More »
Label Holder solves problems in wash down areas.
Holders

Label Holder solves problems in wash down areas.

Model B30 Bottom Load Label Holder eliminates saturation and bleeding of labels caused by washdown solutions entering through open top of top-load label holders. One-piece, sealed-at-the-top design shields labels from water, cleaning fluids, and dirt. Soft, integral bead under clear front window provides added grip to hold labels in place. Bottom opening allows promotional signage to hang below...

Read More »
Tags

RFID Kit enables printers to produce smart labels.

RFID Kit allows CL408e and CL412e printers, with serial numbers higher than 20390000, to produce labels and tags with RFID capability. Utilizing high frequency chips (13.56 MHz range) embedded in labels, kit enables printers to print on label and program chip inside label simultaneously. Information encoded in label or tag can be changed during its lifetime. Kit consists of interface card and...

Read More »
Wipe-On Printer Applicator operates at up to 12 linear ips.
Labelers

Wipe-On Printer Applicator operates at up to 12 linear ips.

Model PA4000 includes direct drive DC stepper motor, powered rewind, 6.5 in. web width, and standard 12 in. diameter label roll capacity. Under microprocessor control, label placement is accurate to ±1/32 in. Printer applicator can be oriented for side, top, or bottom placement of wide range of label shapes and sizes. Wipe-on, tamp-blow, and blow-on versions are available. Each incorporates...

Read More »
Wipe-On Labeler provides zero downtime labeling.
Labelers

Wipe-On Labeler provides zero downtime labeling.

Model 3155 applies pressure sensitive labels at 5,500 in. of web per minute. Automatic Speed Following automatically matches speed to varying product input speed to ensure accurate labeling within 1/64 in. R3 digital controller display rotates for operator viewing from any position, and can be set for remote viewing. Automatic labeling setup enables operators to preprogram labeler for multiple...

Read More »
Belt System provides closing/warning notification.
Cones

Belt System provides closing/warning notification.

Lamba® Belt with precision retracting spring allows 2 in. standard belt to extend from 0 to 7 ft 6 in. Unit attaches to Lamba cone in minutes, alleviating traffic in work areas and blocking off cleanup areas. Belt system offers support for flashing light or lock-in sign at top of cone for additional warning. System comes with ring weights, Lamba Belt, and Lamba cones. Cones offer 4-sided...

Read More »
Labels warn of arc-flash hazard.
Labels

Labels warn of arc-flash hazard.

Arc-flash protection labels, available in 5 different types, comply with article 110.16 of 2002 NEC to reduce occurrences of serious injury or death resulting from arcing faults. Warning labels are offered in 3.5 x 5 and 5 x 7 in. sizes, and danger labels come in 5 x 7 and 4 x 6 in. sizes. Additional warning-type labels allow end users to write information directly onto label.

Read More »
Tag Attaching System is offered as replacement for string.
Taggers

Tag Attaching System is offered as replacement for string.

AVERY DENNISON(TM) StringTach(TM) securely fastens brand, product care, and price tags to apparel, footwear, jewelry, eyewear, handbags, and leather goods. System consists of thread section made of polyester material, integrated with molded plastic head at one end and molded plastic tail at other end. Fasteners are available in lengths of 4.7 and 7.9 in. in black or white. They can be ordered in...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics