Labelers

Labelers

Label Printer Applicator features touch screen control.

Model LM3510 includes multi-featured touchscreen control platform, quick change tamp pads, and 15 I/O points for integration to other machines. Other features include dual-trigger input, 2 serial ports, encoder port, batch counter, job storage, and printer status output. Unit is programmed via HLI-100 handheld programming pendent or optional Smart Touch Screen Control, which can control up to 4...

Read More »
Printer/Applicator handles multiple labels simultaneously.
Labelers

Printer/Applicator handles multiple labels simultaneously.

Capable of applying labels to front, side, and back panels of pallets, 3-Panel Printer Applicator is suited for production lines requiring application of multiple labels to boxes or pallets at same point in production line. Unit allows operators to select label application to one, two, or three panels of pallets or cases.

Read More »
Pressure Sensitive Labeler handles up to 300 containers/min.
Dispensers

Pressure Sensitive Labeler handles up to 300 containers/min.

Featuring stainless steel and aluminum construction, Model 326 Auto-Colt III Trunnion handles round pharmaceutical and opthalmic containers measuring 0.563-2 in. in dia with shoulder heights from 0.813-3 in. System features servo-driven feedscrew and trunnion roll system for positive container handling and servo-driven label dispenser/applicator that provides accuracies of ±0.5 mm. System...

Read More »
Automatic Shipping System handles small parcels.
Belt Conveyors

Automatic Shipping System handles small parcels.

Designed for envelopes, bags, pouches, and small parcels, ShipMaster 800 automates shipping process from point where cartons are packed. Belted system can scan order ID, weigh, print/apply shipping label, verify label, and manifest, all in about 10-15 ft of space. Typical system replaces 2-4 manual operators and processes 15-20 pieces per minute.

Read More »
Floor, Lift Truck and Conveyor Scales

Inline Shipping System processes up to 20 cartons/min.

In about 10-15 ft of space, ShipMaster 900 can scan order ID, weigh, print/apply shipping label, verify label, and manifest. Able to replace 2-4 manual operators, system includes infeed/outfeed conveyor, automation center with PC-based controller, in-motion scale, fixed position order ID scanner, and fixed position label verification scanner, as well as scanner interface, CASI print and apply,...

Read More »
Label Applicator has PLC controls with touchscreen HMI.
Labelers

Label Applicator has PLC controls with touchscreen HMI.

Available in tamp, tamp/blow, or synchronous configurations, Model e300 features variable speed stepper motor that achieves speeds up to 1,000 in. of label web/min. Product includes touchscreen display, and angled U-arm cradle mount for top, bottom, and side applications. Constructed of anodized aluminum, rugged industrial-duty applicator is ideal for pressure sensitive label applications of an...

Read More »
Label Applicator comes with tamp module.
Labelers

Label Applicator comes with tamp module.

Featuring anodized aluminum construction for protection from corrosive environments, Model ST1000 applies various sizes and shapes of pressure sensitive labels. Top, bottom, and side applications are accomplished with angled U-arm for positioning of applicator head to product. With tamp module, Model ST1000 can be used for recessed areas, indexing lines, and variable speed lines. Additional...

Read More »
Printer/Applicator can print and apply over 100 labels/min.
Labelers

Printer/Applicator can print and apply over 100 labels/min.

Designed for moderate to high speed labeling to top or side of product, Tharo PA500w wipe-on label printer/applicator incorporates product sensor and controller that ensure accurate label placement on product. Wipe-on brush enables proper adhesion to smooth flat surfaces as well as uneven surfaces. Device applies labels from 3 x 1 in. to 4Â-½ x 7 in. to variety of materials, such as cartons,...

Read More »
Marking Equipment

Concept Systems Inc. Introduces New Lumber Barcode Applicator Systems

New ink jet system prints directly on lumber to eliminate cost and labeling problems. A labeling version is also available. Albany, OR - December 29, 2008 - In partnership with Grade Tech Systems Inc. of Lake Stevens, Washington, Concept Systems, Control Engineering Magazine's 2007 System Integrator of the Year, today announced the availability of two new lumber barcode applicator systems, giving...

Read More »
Labelers

Labeling Systems optimize print-on-the-go functionality.

Once connected to PCs via USB, PT-1230PC and PT-2430PC let users design and print labels with built-in P-touch® Lite software. Both models weigh 1 lb and do not require any software to be installed on host PC. Labels print exactly as designed/displayed and can include symbols, photos, graphics, and any TrueType fonts. PT-1230PC has manual cutter and prints on TZ laminated tapes up to...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers