Surface Mount Module provides data and power isolation.

Surface Mount Module provides data and power isolation.

Able to switch automatically between full-speed (12 Mbps) and low-speed (1.5 Mbps) operation as required by application, NMUSB202MC provides 2-port USB data and power isolation from- one upstream port. Module counts as- 2 USB hubs for cascaded applications when used in conjunction with host controller and provides full 5 V/500 mA power to each downstream port. Standard 250 VRMS reinforced...

Read More »
Three-Way Isolator Transmitter Splitter has compact design.

Three-Way Isolator Transmitter Splitter has compact design.

With- single circuit input of 4–20 mA and dual output of 4–20 mA, 3-way signal isolator transmitter splitter features galvanic isolation that eliminates problems associated with ground loops, transient, and unwanted noise interference. This 17.5 mm unit features electrical isolation between input, output, and power circuits and allows precise adjustments after installation. Along with load...

Read More »
Transistor Photocouplers offer wide operating temperature.

Transistor Photocouplers offer wide operating temperature.

Housed in SO16 package with operating temperature of -55 to +125°C, 4-channel TLP292-4 and TLP293-4 offer isolation voltage of 3,750 Vrms for high-density surface mount applications. Both are comprised of phototransistors optically coupled to InGaAs infrared emitting diodes. TLP292-4 is connected in inverse parallel configuration, and can operate directly by AC input current. With...

Read More »
Strain Gage Input Module offers 1,500 Vrms input-to-bus isolation.

Strain Gage Input Module offers 1,500 Vrms input-to-bus isolation.

Able to interface to quarter, half, or full-bridge sensors using 4- or 6-wire connection, MAQ®20-BRDG1 provides 4 channels of strain gage input. Unit interfaces to transducers with- nominal resistance of 100 Ω to 1 kΩ; four 24-bit data converters provide measurement capability with accuracy to ±0.05%; and anti-alias filtering eliminates signal degradation from environmental noise. Signal...

Read More »
Isolator Module operates in critical USB environments.

Isolator Module operates in critical USB environments.

Aimed at industrial control applications, Model NMUSB202MC provides dual port USB data and power isolation from single upstream port with full 500 mA power available from each port. Surface mount unit can automatically switch between 1.5 Mbps and 12 Mbps, as application requires. Used with host controller, single module counts as 2 USB hubs for cascaded applications, while providing immunity to...

Read More »
Latching Circulator-Isolator offers 1 µs switching speed.

Latching Circulator-Isolator offers 1 µs switching speed.

Covering- bandwidths across 16–35 GHz range, Ka-Band Dual-Junction Latching Circulator-Isolator is suitable for satellite communications links, commercial aviation systems, missile systems, and other high-rel aerospace applications. Unit offers low insertion loss of 0.2 dB in transmit mode and 0.4 dB in receive mode. Device will handle +39 dBm transmit power with 25 dB isolation to protect...

Read More »
Next-Gen TX, RX, and Timing Modules by TRAK at IMS 2015

Next-Gen TX, RX, and Timing Modules by TRAK at IMS 2015

TRAK Microwave has chosen IMS 2015 in Phoenix to announce the availability of several new aerospace and SATCOM communication system subassemblies and precision network timing products. These new products demonstrate the latest size, weight, and performance (SWaP) requirements for integrated multi-function assemblies and synchronization in both civilian and military communications. Ku-Band Block...

Read More »
PSL Will Exhibit their Groundbreaking Nano Containment Dispensary Isolator with Contained Drum Hoist at Achema 2015 (stand C31, Hall 5.1)

PSL Will Exhibit their Groundbreaking Nano Containment Dispensary Isolator with Contained Drum Hoist at Achema 2015 (stand C31, Hall 5.1)

Powder Systems Ltd (PSL) supports its customer’s global expansion with their innovative quality nano containment technology. PSL worked closely with the end user to develop suitable solutions for their high potent facility and is providing a Dispensary Isolator including a contained drum hoist mechanism. This safe solution is part of a Global Supplier Agreement and PSL will exhibit their first...

Read More »
Try Out the Latest CRL Remote Handling Solutions from DE-STA-CO at SNMMI

Try Out the Latest CRL Remote Handling Solutions from DE-STA-CO at SNMMI

DE-STA-CO booth will feature unique isolator unit equipped with several containment solutions Auburn Hills, Mich. - – DE-STA-CO will provide demos of several of its latest Central Research Laboratories (CRL) remote handling solutions using a single unique isolator unit at the upcoming SNMMI Annual Meeting. The SNMMI Annual Meeting takes place June 6-10 at the Baltimore Convention Center in...

Read More »
Universal Signal Isolators accept voltages up to 3,600 Vdc.

Universal Signal Isolators accept voltages up to 3,600 Vdc.

Optimized for DC railway and light rail transit applications, P40000 ProLine Signal Isolators provide >0.1% gain error, cutoff frequency of >5 kHz with optional loss pass filtering, and >0.1 ms rise times. Units also offer high immunity to transient noise of T-CMRR >115 dB, with virtually no influence from common mode voltages. For shunt based current measurements, P41000 Series can accept...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics