Four-Channel Devices isolate both data and power.

Housed in 10 x 10 mm surface mount package, ADuM540x Series integrates iCoupler® digital isolation technology and isoPower(TM) DC-DC converter, which provides up to 500 mW of regulated, isolated power and can operate at 5.0 or 3.3 V. Based on chipscale transformers, iCoupler digital isolators condition and drive data across transformers, while isoPower converter employs switches, rectifiers, and...

Read More »

Pharmaceutical Isolators offer built-in microbial protection.

Compliant with USP 797 criteria, Esco Pharmacy Isolators, Negative Pressure Models provide safe and clean environment for compounding of hazardous, sterile drug preparations including antineoplastics and cytotoxics. They include ULPA filters and ISOCIDE(TM) antimicrobial coating on all powder coated surfaces that eliminates surface bacteria. Other features include digital airflow and pressure...

Read More »

Isolator Mounting Bases isolate sensors up to 1,500 V.

Measuring 1 in. across flats with 0.82 mounting pad, Models SF21 and SF22 accommodate up to medium diameter accelerometers and small diameter side-exit accelerometers. Models SF23 and SF24 are both 1 1/8 in. across flats with 0.94 in. mounting pad that can accommodate large diameter top-exit sensors. All have -¼-28 integral stud on accelerometer side, and are used to prevent voltage spikes from...

Read More »

Logic Gate Optocouplers offer high noise immunity.

Combining noise immunity of 20 kV/-µs with speeds of 25 Mbps, FOD07xx Series isolates logic control circuitry from transceiver at bus interface level, minimizing chance of transmission errors or system failures. Optoplanar® co-planar packaging reduces package capacitance, optimizing Common Mode Noise Rejection rating. Qualified according to UL1577 standard, FOD07xx Series is suited for...

Read More »

Electrical Isolator provides input ranges of 0-20 or 4-20 mA.

Suited for chemical, petrochemical, water, power, energy, and HVAC industries, Passive Loop Powered Isolator Model DR910 is used to provide electrical isolation between control electronics and process I/O. It obtains power from input signal and does not need any auxiliary power. CE compliant unit is DIN Rail mountable in accordance with EN 50 022.

Read More »
Digital Optocouplers have high-speed, dual-voltage design.

Digital Optocouplers have high-speed, dual-voltage design.

Supporting 3.3 and 5 V supply voltages, single-channel ACPL-W70L and dual-channel ACPL-K73L feature minimum speeds of 15 MBd and provide up to 5 kV isolation voltage protection. Both digital CMOS stretched optocouplers are designed to achieve low propagation delay (55 ns max) and pulse width distortion (25 ns max) with additional glitch-free power-up feature. Powered by forward current of 4 mA,...

Read More »
New Configurable Universal Signal Conditioners for Process Applications - Weidmuller's MANN SERIES

New Configurable Universal Signal Conditioners for Process Applications - Weidmuller's MANN SERIES

RICHMOND, VA (June 9, 2008) - Weidmuller announces the introduction of a new family of innovative products for processing analog signals - the MANN SERIES. This new series ranges from simple dedicated units to complex microprocessor-controlled devices that can be used with almost all signal types and measurement sensors. The MANN SERIES products also offer a variety of integrated functions...

Read More »

Reverse Power Isolators suit cellular base stations.

Tuned to cover frequency bands from 869-2,190 MHz, PIxxxxAG-21H line of 30 W reverse power single junction isolators feature forward IMD performance of -75 dBc, insertion loss of 0.2 dB nominal, and isolation equal to 20 dB minimum. With IMD performance of -70 dBc forward and -90 dBc reverse, insertion loss of 0.35 dB nominal, and isolation equal to 50 dB minimum, PDxxxxAQ-21H line of 100 W...

Read More »

AquaBlock 2 Voltage Blocking System: The Solution for Waterborne Coatings and Electrostatic Applicators

Toledo, OH -- ITW Ransburg, the recognized world leader in liquid electrostatic coatings technology, is proud to introduce the AquaBlock 2 voltage isolation system for waterborne systems. The AquaBlock 2 is a simple, effective way to block high voltage electrostatic paint applicators from a grounded waterborne coating supply. By combining the advantages of waterborne coating technology with the...

Read More »

Photocoupler suits direct gate driving of IGBTs and MOSFETs.

Housed in 6-pin SDIP package that meets insulation requirements of international safety standards, Model TLP700 features ±2.0 A peak output current, 2 mA supply current, and 5,000 Vrms isolation voltage. Unit consists of integrated photodetector optically coupled to gallium-aluminum-arsenide LED in package measuring 6.8 x 7.62 x 3.65 mm. Operating from -40 to 100°C, device is suited for factory...

Read More »

All Topics