Transducer converts/isolates mV signals from shunt resistors.

Featuring three-way 1.5 kV isolation, MINI Analog Shunt Transducer filters, isolates, and converts mV signal from shunt resistors to standard analog current or voltage signal. Available with 6.2 mm housing and T-Bus power bus capabilities, units can be configured to accept -50 mV to 3 V drops. Hot-swappable signal conditioning slices clip onto powering T-Bus connector without removing bus bars or...

Read More »

SMT Optocouplers are suited for low-profile applications.

Designed to meet UL international safety standards, TLP109 and TLP116A are supplied in SO6 package with 0.4 mm thick (min) internal insulation that provides isolation voltage of 3,750 Vrms (min) as well as clearance and creepage distances of 5 mm (min). Transistor-transistor logic (TTL)-compatible TLP109 is 30 V (max), 1 Mbps general-purpose photocoupler with open-collector output, while TLP116A...

Read More »
Signal Conditioner is IP20-rated.

Signal Conditioner is IP20-rated.

Accepting variety of analog DC input types including temperature, DC, and frequency, Wave TTA functions as signal isolator, transmitter, converter, linearizer, and trip amplifier. Measuring 45 mm wide, cULus certified product has operating temperature range of -40 to 158-ºF, allowing for either factory or field enclosure mounting. All output types such as bipolar are settable, while input/output...

Read More »
Battery Isolator reduces charging system workload.

Battery Isolator reduces charging system workload.

Smart Battery Isolator 48525/48530 prevents loads on auxiliary battery from draining starting battery, regardless of alternator type. Available in 85 and 200 A versions, product reduces charging system workload by not connecting to auxiliary battery until primary battery is charged to 13.2 V. This minimizes strain on charging components, and no diode efficiency losses occur during use. Product...

Read More »
Optocouplers offer tight pulse width distortion of 100 nsec.

Optocouplers offer tight pulse width distortion of 100 nsec.

Operating at peak working voltage of 1,414 V, FOD3120 and FOD3150, 2.5 and 1A output current gate drive optocouplers, achieve high CMR rating, and can drive 1,200 V or 20 A IGBTs and MOSFETs even in noisiest industrial environment. They utilize lead-free terminals, and are characterized for moisture sensitivity in accordance with Pb-free reflow requirements of joint IPC/JEDEC standard J-STD-020....

Read More »

Optocouplers provide noise immunity for various applications.

Delivering 2.5 and 1 A output current, respectively, FOD3120 and FOD3150 gate drive optocouplers can drive 1,200 V/20 A IGBTs and MOSFETs in noisiest industrial environments. They offer pulse width distortion of 100 ns and peak working voltage of 1,414 V. Suited for solar inverters, motor drives, and induction heating applications, units feature lead-free (Pb-free) terminals and comply with...

Read More »

Compact Isolator measures 2.0 x 2.0 x 1.0 mm.

Designed for use with multi-band mobile phones, CEG23 series compact isolator includes LGA terminals which contribute to mounting space reduction. It utilizes two-port circuit technology, integrated circuit board, and electrode construction that results in reduction of characteristics such as dispersion, insertion loss, and variation within bandwidth.

Read More »

Triac Photocouplers include built-in noise immunity.

Housed in 6-pin DIP packages, Models TLP3782 and TLP3783 provide peak off-stage output voltage of 800 V and isolation voltage up to 5,000 Vrms. Each consists of GaAs IR emitting diode and zero crossing turn-on photo-triac. Units feature trigger LED current of 10 and 5 mA, respectively, input forward current of 30 mA, and on-state current of 0.1 Arms. Zero crossing devices provide optical...

Read More »
Signal Isolator suits control system applications.

Signal Isolator suits control system applications.

Offering savings on both I/O wiring and panel space with 12.5 mm width, ITXPlus measures, filters, and isolates different input parameters and converts them into 4-20 mA output. It can be programmed to suit full range of common analog signals and sensor types. Including selectable upscale or downscale sensor-break response, unit features built-in functionality for applications requiring...

Read More »

TRIAC Driver Optocouplers lower standby power.

Designed to meet regulations such as 1Watt Initiative and ENERGY STAR®, FOD41xx series eliminates RC-snubber network when used to drive snubberless discrete power TRIAC. RoHS-compliant products utilize Pb-free terminals and feature 10,000 V/-µs min rating for commutating and static dv/dt, protecting against noise found in industrial environments. Each optically-isolated TRIAC driver also...

Read More »

All Topics