Optical Isolator Modules solve noisy signal issues.

Optical Isolator Modules solve noisy signal issues.

Providing 1,800 V optical isolation, Model FC-ISO-C is designed with 3 complementary open collector outputs rated for 5-36 Vdc that can be used in single-ended configurations, while Model FC-ISO-D features 3 differential line driver outputs rated for 5 Vdc. Modules have 3 complementary inputs rated for 4.5-7.5 and 12-26 Vdc with frequency response up to 1 MHz. Both include integral 35 mm DIN rail...

Read More »

Digital Optical Isolator IC features open-drain outputs.

Available in 8-pin surface mount or DIP package, Model CPC5002 isolates 2 logic signals, and supports 10 Mbaud data rates for digital communications over optical barrier while providing 3,750 Vrms of galvanic isolation. Unit utilizes CMOS photodetector, requires 1.5 mA LED drive current, and operates from 2.7-5.5 V. Unlike magnetically isolated digital isolator ICs, Model CPC5002 requires no...

Read More »
Pneumatic Vibration Isolators suit loads up to 3,200 lb.

Pneumatic Vibration Isolators suit loads up to 3,200 lb.

Based on Stabilizer(TM) hybrid-chamber design, I-800P Series delivers vertical and horizontal isolation. Units offer horizontal travel of 0.12 in. with repositioning accuracy of 0.003 in. Standard vertical releveling capability is ±0.010 in., but custom designs with releveling accuracy of 0.002 in. are available. Fitted onto 8 in.-² leg weldments or manufactured on stand-alone legs, isolators...

Read More »

Phototriac Optocouplers feature blocking voltage of 600 Vac.

Housed in miniflat SOP-4 package with 2.0 mm height, VOM160 and VOM305x Series offer input trigger LED current of 5, 7, and 10 mA. Non-zero crossing phototriac optocouplers turn motors and solenoid controls on/off in refrigerators, lamps, washers, and coffee makers. Models VOM3052T and VOM3053T, with static dV/dt of 1,500 V/-µs, are well suited for noisy environments where lower dV/dt can cause...

Read More »
Non-Zero Crossing Phototriac Optocouplers come in Green package.

Non-Zero Crossing Phototriac Optocouplers come in Green package.

Supplied in miniflat SOP-4 package with 2.0 mm profile, VOM160 and VOM305x series offer 3 choices of input trigger LED current: 5 mA (VOM160NT/VOM3053T), 7 mA (VOM160PT), and 10 mA (VOM160RT/VOM3052T). Blocking voltage is 600 Vac, and static dV/dt is 500 or 1,500 V/-µs. In addition to being used for turning on/off motors and solenoid control in refrigerators, washers, lamps, and coffee makers,...

Read More »

Vishay to Showcase Power Electronics for Solar Energy at Intersolar Europe 2012

Vishay Intertechnology to Showcase Broad Range of Standard and Special Power Electronics for Solar Energy at Intersolar Europe 2012 MALVERN, Pa. - Vishay Intertechnology, Inc. (NYSE: VSH) today announced that the company will be presenting powerful and energy-efficient power electronics products such as rectifiers, resistors, aluminum and film capacitors, diodes, MOSFETs, and optocouplers at...

Read More »

Isolated Half-Bridge Gate Drivers have 50-year operating life.

Respectively providing 3 kV rms isolation in narrow-body, 16-lead SOIC and 5 kV rms reinforced isolation in wide-body, 16-lead SOIC, ADuM3223 and ADuM4223 use iCoupler® digital isolator technology, feature sub 55 nsec propagation delay and less than 5 nsec delay matching, and offer 700 Vpeak galvanic isolation between high- and low-side outputs. With 2 independent isolation channels, drivers...

Read More »
Bosch Packaging Technology Presents New Developments for Liquid and Solid Pharmaceuticals

Bosch Packaging Technology Presents New Developments for Liquid and Solid Pharmaceuticals

Entire process chain for solid pharmaceuticals on show Inspection technology from standard to high-end and x-ray inspection 100th isolator sold with FLC filling and sealing line At Achema 2012 in Frankfurt/Main, Germany, Bosch Packaging Technology exhibits its innovations at three interconnected booths. The company highlights the sale of its 100th isolator and the introduction of its new Fast Air...

Read More »

ATEX-Certified Optocoupler serves potentially explosive areas.

Supplied in 17.8 x 9.6 x 6.1 mm plastic package, CNY65Exi meets EU ATEX 94/9/EC directive for operation in potentially explosive atmospheres while offering isolation voltage of 11,600 V and comparative tracking index of 475. IR light transmits data and control signals from typically low-voltage control side to high-voltage equipment, and emitter and detector are separated by distance of greater...

Read More »

Vishay Intertechnology Announces 'Super 12' Featured Products for 2012

Innovative Components Offer Industry-Leading Specifications for a Variety of Applications MALVERN, Pa. - Vishay Intertechnology, Inc. (NYSE: VSH) today announced its Super 12 featured products for 2012. Each year, Vishay's Super 12 collection showcases the company's industry-leading capabilities in semiconductor and passive devices, providing design engineers with a shortcut to leading industry...

Read More »

All Topics