Intermediate Bulk Containers (IBC)

Automated Mixing, Blending and Transfer Systems Ensure Product Purity, Process Protocol and Worker Safety
Intermediate Bulk Containers (IBC)

Automated Mixing, Blending and Transfer Systems Ensure Product Purity, Process Protocol and Worker Safety

Custom software controls, manages and validates system-wide process and safety operations for each bin Ft. Worth, TX: Mixing, blending and transfer systems designed, engineered and custom programmed in-house by Tote-® Systems provide seamless and automatic control for processing and reporting on dispensing, mixing, blending, filling and transport operations involving pharmaceutical powders,...

Read More »
Base Container facilitates quick unloading of IBCs.
Intermediate Bulk Containers (IBC)

Base Container facilitates quick unloading of IBCs.

With 450 gal holding capacity, double wall rectangular, low profile BC450 is designed to hold chemical tote bins for up to 3Â-½ hr and offers partially sloped bottom for near complete draining from top suction. It is constructed from rugged, crosslink polyethylene or FDA approved and NSF certified linear polyethylene. Features include molded-in forklift access, 2Â-½ in. thick mild steel...

Read More »
Plastic Bulk Container features oversized lid.
Intermediate Bulk Containers (IBC)

Plastic Bulk Container features oversized lid.

Reusable OTP Intermediate Bulk Container features 23 in. wide lid and opening that allow spray balls, nozzles, and other impingement cleaning devices to reach entire interior surface. Use of optional removable liner eliminates cleaning completely. Offered in 275 and 330 gal capacities, chemical- and impact-resistant OTP accommodates 4-way lift access, stacks 2 high when full and 3 high when...

Read More »
Storage System enables IBC storage indoors or out.
Intermediate Bulk Containers (IBC)

Storage System enables IBC storage indoors or out.

PIGÂ-® IBC Roll-Top Hardcover Storage Unit provides protected storage of IBCs. Corrosion-resistant, weather-tight design keeps IBCs safe and secure, while lockable doors and roll-top covers open from both sides and slide out of way for ease of access. Unit features 2-way forklift entry and sits atop one 360-gal sump, which contains leaks and spills from IBC. Units help comply with 40 CFR...

Read More »
Collapsible Bulk Container handles liquid-type loads.
Intermediate Bulk Containers (IBC)

Collapsible Bulk Container handles liquid-type loads.

Manufactured from FDA-approved, high-density polyethylene, Citadel(TM) reusable, plastic, bulk box measures 48 x 45 x 47 in. and holds up to 300 gal or 3,000 of liquid-type product. Weather- and chemical-resistant, 100% recyclable container has smooth surfaces and rounded edges. Lid design provides recessed latches, contoured channels, and edges that lay flush with side panels. Able to be stacked...

Read More »
IBC accommodates off-the-mark forklift entry.
Intermediate Bulk Containers (IBC)

IBC accommodates off-the-mark forklift entry.

HenHandler Intermediate Bulk Container (IBC) for food features polyethylene pallet base that may be removed and replaced (if necessary) to extend operational life of container. Rotationally molded in one piece, 4-way accessible base is attached to impact-resistant bin with four, one-piece, polyethylene bolts. IBC accommodates weights to 2,000 lbs., stacks two-high, and is available in 30 and 32...

Read More »
All-Plastic IBC replaces steel cage units.
Intermediate Bulk Containers (IBC)

All-Plastic IBC replaces steel cage units.

Heavy-duty OTP intermediate bulk container consists of seamless, reinforced, 1-piece container and base that permits secure shipping and storage of heavy weight products in all-plastic, anti-bulging, reusable design. Rotomolded of LLDPE, IBC holds more than 4,000 lbs. of product and stacks 2 high when filled or 3 high empty. Molded with 4-way lift access, container is offered in 275- and 330-gal...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics