USB Hub System connects measuring gauges to computers.
Including data connection cables, 7-port industrial model USB hub, and MarCom data transmission software, MarConnect USB Interface Kits enable universal assembly of multiple measuring systems for data transmission. With additional hubs, up to 100 measuring devices can be connected using USB interface, and software can transfer measure values directly Excel spreadsheets or text files. Measuring...
Read More »
Debug Interfaces support Freescale ColdFire/DSP processors.
While OCDemon usb2Sprite provides USB 2.0 interface to on-chip debugging features of ColdFire and DSP 56300 microprocessors offering solution for designing, debugging, and programming embedded hardware and application software. Pre-built GNU tools and sample configurations contain source, gdbinit, and make files, allowing developers to build, download, and debug via gdb. Flash Programmer provides...
Read More »ABS Approval Extended to the WAGO-I/O-System
Germantown, WI - August 2006 - WAGO Corporation is pleased to announce the extension of ABS (American Bureau of Shipping) Type Approval for their 750-841 Series Ethernet enabled programmable controller and the 758 Series Industrial PC - among other I/O modules. This approval certifies WAGO's I/O and controller products for use in ABS class ships and facilities in control and monitoring...
Read More »
Front-Load PC Card Adapter is PCI Rev. 2.2 compliant.
Model PCD-TP110CS PCI to PC CardBus adapter installs in 3.5 or 5.25 in. drive bay and supports one independent card socket compliant with 16/32-bit PC Card standard. Drive unit connects to PCI interface board with included flat ribbon cable. Compatible with Intel 82365SL controller and ExCA, device supports PC Card applications including SRAM, Linear Flash, ATA Flash, modem, and wireless LAN....
Read More »Choosing the Right Cleanroom Equipment Supplier
This whitepaper discusses key considerations for choosing a cleanroom equipment supplier: what to look for, types of cleanrooms & their standards.
Read More »
Ethernet Module expands Phoenix transport system.
Providing Ethernet connectivity to Phoenix Fiber Optic Transport System, Model A8911ETH is suited for transporting IP data and IP video traffic between Phoenix nodes. Module has three RJ-45 ports designed to insert or extract full-duplex 10/100Base-T Ethernet data onto Phoenix network. Allowing for auto-negotiation and automatic MDI/MDI-X selection, module includes integrated Ethernet switch with...
Read More »
Stackable Ethernet I/O Block processes 96 I/O signals.
Suited for distributed I/O and SCADA applications, EtherStax(TM) ES2113 offers Modbus TCP/UDP/IP communication to host controller and i2oÃ-® technology for peer-to-peer communication between I/O units. Dual network ports support 10/100Base-TX copper and 100Base-FX fiber-optic connections and provide redundant communication path for critical applications. Embedded web page provides...
Read More »
Touch Panel Controller provides quick-start programming.
Based on Comfile's CUBLOC(TM) CB290 PLC-on-a-chip, CUTOUCH CT1720(TM) combines touch panel, graphic LCD, and programmable embedded computer. It provides 91 I/O ports, 8 channels of 10-bit A/D, 6 x 16-bit PWM outputs, and 80 KB Flash memory for development of HMI devices. Ladder Logic offers real-time sequential processing, while Basic supplies number-crunching power. Controller includes MODBUS...
Read More »
Serial-to-Ethernet Gateway provides Internet interface.
Complete with RJ-45 connector for instant use, RoHS-compliant Model EG-SR-7150MJ is based on WIZnet's TCP/IP-offload IC W3150A with Realtek's RTL8201 Ethernet driver chip. It features built-in Atmel AT89C51RC2 8-bit microcontroller with 32 KB Flash memory and 32 KB SRAM. Software set-up allows users to create 10/100 Mbps Ethernet interface with max serial rate of 230 Kbps. Gateway supports TCP...
Read More »
Operator Panels are offered in various configurations.
Class 270 Simatic HMI Panels are configured with WinCC flexible 2005 for operation, configuration, data exchange, and network integration. TP 277 Touch Panels and OP 277 Operator Panels have 6 in. TFT display, while Multi Panel MP 277 and MP 270B are offered with 8 and 10 in. TFT displays and are available with touch functionality or as key-operated versions. All 4 include USB, MPI/DP and...
Read More »
Bystronic Presented The Byjet Waterjet, The PR Series Press Brake and Byvision Control at Westec
(Hauppauge, NY) Bystronic showcased the Byjet 3015 waterjet cutting system, the PR Series press brake and the new ByVision Control user interface at WESTEC 2006. The Byjet with its available shuttle table delivers a significant increase in productivity over standalone systems; for even greater productivity, the system offers up to 4 HPT cutting heads. The Bypump APC intensifier produces a...
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
